Using GEM with Pd

From 4f5f017bdf452419ad396346bacad623acb0f41c Mon Sep 17 00:00:00 2001 From: Travis CI Date: Thu, 9 May 2019 20:32:44 +0000 Subject: Gem 01b1861db023a225d01a4d5a519cf54f09f631f5 osx/i386 built 'master:01b1861db023a225d01a4d5a519cf54f09f631f5' for osx/i386 --- Gem/manual/GemWPd.html | 280 ++++++++++++++++++++++++------------------------- 1 file changed, 140 insertions(+), 140 deletions(-) (limited to 'Gem/manual/GemWPd.html') diff --git a/Gem/manual/GemWPd.html b/Gem/manual/GemWPd.html index b564d99..46c863a 100644 --- a/Gem/manual/GemWPd.html +++ b/Gem/manual/GemWPd.html @@ -1,140 +1,140 @@ - - - - - - - Using GEM with Pd - - - - -

-Using GEM with Pd

- An important fact is that GEM is NOT an application. -It is a library that the application Pd loads in at run-time. Most -of this information is taken directly from the GEM FAQ. -

How do I install GEM on IRIX? -
How do I install GEM on Win95/NT/2k? -
How do I install GEM on linux? -
How do I install GEM on macOS-X? -
How do I run GEM on IRIX? -
How do I run GEM on Win95/NT/2k? -
How do I run GEM on linux? -
How do I run GEM on linux? -
Why doesn't GEM run? -

-How do I install GEM and Pd on IRIX?

-See the readme for installing Pd. -

Uncompress and untar the GEM file that you downloaded. GEM should -be located at -

pd/gem -

depending on where you have installed Pd. -

If you run the shell script, GEM.INSTALL.sh, then all of the example -files and documention -
should be put in the correct locations. -

-How do I install GEM and Pd on WinNT?

-See the readme for installing Pd. -

TODO: there should be a install package somewhere -

Unzip the GEM file that you downloaded so that it is at -

pd\gem -

depending on where you have installed Pd. -

If you run GEM.INSTALL.bat, then all of the example files and documentation -should be put in the correct locations. -

-How do I install GEM and Pd on linux?

-See the readme for installing Pd. -

Uncompress and untar the GEM file that you downloaded so that it is at -

pd/gem -

depending on where you have installed Pd. -

chdir into <pd/gem>/src/Gnu -

read the README.build -

run ./configure and afterwards make -

If you run make install, then all of the example files and documentation -should be put in the correct locations. -

-How do I install GEM and Pd on macOS-X?

-See the readme for installing Pd. -

TODO: there should be a install package somewhere -

-How do I run GEM on IRIX?

- To use GEM type something like: -

/usr/people/mdanks/pd/bin/pd -lib /usr/people/mdanks/pd/gem/Gem -

(where /usr/people/mdanks is the path to the pd directory). Check out -the README for Pd to see examples of the -lib flag. If you just try to -"run" GEM, you will get an error! Notice that last word is a capital Gem. -If you get a "can't find gem_setup" error, then that is the problem. Look -in the GEM FAQ -
for trouble shooting suggestions. -

If you don't see startup messages from GEM, then something went wrong. -
Also, you might need to add pd/bin to your PATH environment variable. -

-How do I run GEM on Win95/NT?

- It is best to start Pd from a DOS command line. -If you go to the Start menu, you should find an application called "Command -Prompt" under the Program menu. You need to change to the drive where -you installed Pd. For instance, if it is on your D: drive, just type -d: at the prompt. -

To use GEM type something like: -

\pd\bin\pd -lib /pd/gem/Gem -

depending on where you installed Pd. -

Check out the README for Pd to see examples of the --lib flag. If you just try to double click GEM, you will get an error! -Notice that last word is a capital Gem. If you get a "can't find gem_setup" -error, then that is the problem. Look in the GEM FAQ for trouble shooting -suggestions. -

If you don't see a startup message from GEM, then something went wrong. -

Most people use the command shell to start Pd. -It is difficult to configure Pd to run from double-clicking on the icon. -

Also, you might need to add pd/bin to your PATH environment -variable. -

-How do I run GEM on linux?

- To use GEM type something like: -

/usr/people/mdanks/pd/bin/pd -lib /usr/people/mdanks/pd/gem/Gem -

If you don't see startup messages from GEM, then something went wrong. -
Also, you might need to add pd/bin to your PATH environment variable. -

-How do I run GEM on macOS-X?

- To use GEM type something like: -/usr/local/bin/pd -lib /Users/zmoelnig/pd/Gem -

(where /usr/local/bin/pd is the path to the pd directory and -/Users/zmoelnig/pd is the path where the Gem.pd_darwin resides). -Check out the README for Pd to see examples of the -lib flag. If you just try to -"run" GEM, you will get an error! Notice that last word is a capital Gem. -If you get a "can't find gem_setup" error, then that is the problem. Look -in the GEM FAQ -
for trouble shooting suggestions. -

If you don't see startup messages from GEM, then something went wrong. -
Also, you might need to add pd/bin to your PATH environment variable. -

-Why doesn't GEM run?

- Notice that the -lib flag always requires Unix styles -slashes, even if you are on Windows. This means that you need to -do -lib /gem/Gem, not -lib \gem\Gem -

You may also want to use the -nosound flag. -For instance, my PC has problems using audio (it leaks memory), so I just -turn off the audio part of Pd. However, other people can't get GEM -to work if the -nosound is used (on Win95). You can also try the --dac or -adc flags (for digital-analog-conversion only and analog-digital-conversion -only). -

[return] -
- - + + + + + + + Using GEM with Pd + + + +

+Using GEM with Pd

+ An important fact is that GEM is NOT an application. +It is a library that the application Pd loads in at run-time. Most +of this information is taken directly from the GEM FAQ. +

How do I install GEM on IRIX? +
How do I install GEM on Win95/NT/2k? +
How do I install GEM on linux? +
How do I install GEM on macOS-X? +
How do I run GEM on IRIX? +
How do I run GEM on Win95/NT/2k? +
How do I run GEM on linux? +
How do I run GEM on linux? +
Why doesn't GEM run? +

+How do I install GEM and Pd on IRIX?

+See the readme for installing Pd. +

Uncompress and untar the GEM file that you downloaded. GEM should +be located at +

pd/gem +

depending on where you have installed Pd. +

If you run the shell script, GEM.INSTALL.sh, then all of the example +files and documention +
should be put in the correct locations. +

+How do I install GEM and Pd on WinNT?

+See the readme for installing Pd. +

TODO: there should be a install package somewhere +

Unzip the GEM file that you downloaded so that it is at +

pd\gem +

depending on where you have installed Pd. +

If you run GEM.INSTALL.bat, then all of the example files and documentation +should be put in the correct locations. +

+How do I install GEM and Pd on linux?

+See the readme for installing Pd. +

Uncompress and untar the GEM file that you downloaded so that it is at +

pd/gem +

depending on where you have installed Pd. +

chdir into <pd/gem>/src/Gnu +

read the README.build +

run ./configure and afterwards make +

If you run make install, then all of the example files and documentation +should be put in the correct locations. +

+How do I install GEM and Pd on macOS-X?

+See the readme for installing Pd. +

TODO: there should be a install package somewhere +

+How do I run GEM on IRIX?

+ To use GEM type something like: +

/usr/people/mdanks/pd/bin/pd -lib /usr/people/mdanks/pd/gem/Gem +

(where /usr/people/mdanks is the path to the pd directory). Check out +the README for Pd to see examples of the -lib flag. If you just try to +"run" GEM, you will get an error! Notice that last word is a capital Gem. +If you get a "can't find gem_setup" error, then that is the problem. Look +in the GEM FAQ +
for trouble shooting suggestions. +

If you don't see startup messages from GEM, then something went wrong. +
Also, you might need to add pd/bin to your PATH environment variable. +

+How do I run GEM on Win95/NT?

+ It is best to start Pd from a DOS command line. +If you go to the Start menu, you should find an application called "Command +Prompt" under the Program menu. You need to change to the drive where +you installed Pd. For instance, if it is on your D: drive, just type +d: at the prompt. +

To use GEM type something like: +

\pd\bin\pd -lib /pd/gem/Gem +

depending on where you installed Pd. +

Check out the README for Pd to see examples of the +-lib flag. If you just try to double click GEM, you will get an error! +Notice that last word is a capital Gem. If you get a "can't find gem_setup" +error, then that is the problem. Look in the GEM FAQ for trouble shooting +suggestions. +

If you don't see a startup message from GEM, then something went wrong. +

Most people use the command shell to start Pd. +It is difficult to configure Pd to run from double-clicking on the icon. +

Also, you might need to add pd/bin to your PATH environment +variable. +

+How do I run GEM on linux?

+ To use GEM type something like: +

/usr/people/mdanks/pd/bin/pd -lib /usr/people/mdanks/pd/gem/Gem +

If you don't see startup messages from GEM, then something went wrong. +
Also, you might need to add pd/bin to your PATH environment variable. +

+How do I run GEM on macOS-X?

+ To use GEM type something like: +/usr/local/bin/pd -lib /Users/zmoelnig/pd/Gem +

(where /usr/local/bin/pd is the path to the pd directory and +/Users/zmoelnig/pd is the path where the Gem.pd_darwin resides). +Check out the README for Pd to see examples of the -lib flag. If you just try to +"run" GEM, you will get an error! Notice that last word is a capital Gem. +If you get a "can't find gem_setup" error, then that is the problem. Look +in the GEM FAQ +
for trouble shooting suggestions. +

If you don't see startup messages from GEM, then something went wrong. +
Also, you might need to add pd/bin to your PATH environment variable. +

+Why doesn't GEM run?

+ Notice that the -lib flag always requires Unix styles +slashes, even if you are on Windows. This means that you need to +do -lib /gem/Gem, not -lib \gem\Gem +

You may also want to use the -nosound flag. +For instance, my PC has problems using audio (it leaks memory), so I just +turn off the audio part of Pd. However, other people can't get GEM +to work if the -nosound is used (on Win95). You can also try the +-dac or -adc flags (for digital-analog-conversion only and analog-digital-conversion +only). +

[return] +
+ + -- cgit v1.2.1