diff options
| -rw-r--r-- | Makefile | 52 | ||||
| -rw-r--r-- | install-sh | 251 |
2 files changed, 42 insertions, 261 deletions
@@ -2,16 +2,27 @@ # LIBRARY_NAME variable. The folder for your project should have the same name # as your library. LIBRARY_NAME = ext13 +LIBRARY_VERSION = 0.17 # Next, add your source files to the SOURCES variable. SOURCES = catch13~.c filesize.c ftos.c kalashnikov.c mandelbrot~.c mandelbrot.c messages.c openpatch.c piperead~.c pipewrite~.c receive13~.c receive13.c scramble~.c send13~.c send13.c sfwrite13~.c streamin13~.c streamout13~.c strippath.c throw13~.c wavinfo.c # For objects that only build on certain platforms, add those to the SOURCES # line for the right platforms. +SOURCES_Android = +SOURCES_CYGWIN = SOURCES_Darwin = +SOURCES_iphoneos = SOURCES_Linux = cdplayer.c ossmixer.c promiscous~.c SOURCES_Windows = +# if you want to include any other files in the source and binary tarballs, +# list them here. This can be anything from header files, READMEs, example +# patches, documentation, etc. +EXTRA_DIST = d_global13.h stream13.h ext13.h ext13.c ext13-help.pd \ + CHANGES README VERSION + + #------------------------------------------------------------------------------# # # you shouldn't need to edit anything below here, if we did it right :) @@ -26,6 +37,8 @@ objectsdir = $(PD_PATH)/extra CFLAGS = -DPD -I$(PD_PATH)/src -Wall -W -g LDFLAGS = LIBS = +ALLSOURCES := $(SOURCES) $(SOURCES_Android) $(SOURCES_CYGWIN) $(SOURCES_Darwin) \ + $(SOURCES_iphoneos) $(SOURCES_Linux) $(SOURCES_Windows) UNAME := $(shell uname -s) ifeq ($(UNAME),Darwin) @@ -66,6 +79,8 @@ ifeq ($(UNAME),Linux) LDFLAGS += -Wl,--export-dynamic -shared -fPIC LIBS += -lc STRIP = strip --strip-unneeded -R .note -R .comment + DISTDIR=$(LIBRARY_NAME)-$(LIBRARY_VERSION) + DISTBINDIR=$(DISTDIR)-$(OS)-$(shell uname -m) endif ifeq (CYGWIN,$(findstring CYGWIN,$(UNAME))) SOURCES += @@ -127,7 +142,7 @@ single_install: $(LIBRARY_NAME) install-doc install-exec install-doc: install -d $(DESTDIR)$(objectsdir)/$(LIBRARY_NAME) -# install -m644 -p $(SOURCES:.c=-help.pd) $(DESTDIR)$(objectsdir)/$(LIBRARY_NAME) + install -m644 -p $(SOURCES:.c=-help.pd) $(DESTDIR)$(objectsdir)/$(LIBRARY_NAME) install -m644 -p $(wildcard *.pd) $(DESTDIR)$(objectsdir)/$(LIBRARY_NAME) install -m644 -p README $(DESTDIR)$(objectsdir)/$(LIBRARY_NAME)/README.txt install -m644 -p VERSION $(DESTDIR)$(objectsdir)/$(LIBRARY_NAME)/VERSION.txt @@ -144,19 +159,35 @@ clean: -rm -f -- $(LIBRARY_NAME).$(EXTENSION) distclean: clean - -rm -f -- ../$(LIBRARY_NAME)-$(OS)-$(shell uname -m).tar.bz2 - -rm -f -- ../$(LIBRARY_NAME)-$(OS).tar.bz2 + -rm -f -- $(DISTBINDIR).tar.gz + -rm -rf -- $(DISTBINDIR) + -rm -f -- $(DISTDIR).tar.gz + -rm -rf -- $(DISTDIR) -dist: all dist_$(OS) -dist_linux: - cd .. && tar --exclude=.svn -cjpf $(LIBRARY_NAME)-$(OS)-$(shell uname -m).tar.bz2 $(LIBRARY_NAME) +$(DISTBINDIR): + mkdir $(DISTBINDIR) -dist_macosx: - cd .. && tar --exclude=.svn -cjpf $(LIBRARY_NAME)-$(OS).tar.bz2 $(LIBRARY_NAME) +dist-bin: all $(DISTBINDIR) + install -p $(LIBRARY_NAME)-meta.pd $(DISTBINDIR) + install -p $(SOURCES) $(DISTBINDIR) + install -p $(SOURCES:.c=-help.pd) $(DISTBINDIR) + test -z "$(EXTRA_DIST)" || \ + install -p $(EXTRA_DIST) $(DISTBINDIR) +# tar --exclude-vcs -czpf $(DISTBINDIR).tar.gz $(DISTBINDIR) -dist_windows: - cd .. && tar --exclude=.svn -cjpf $(LIBRARY_NAME)-$(OS).tar.bz2 $(LIBRARY_NAME) +$(DISTDIR): + mkdir $(DISTDIR) + +dist: $(DISTDIR) + install -p Makefile $(DISTDIR) + install -p $(LIBRARY_NAME)-meta.pd $(DISTDIR) + install -p $(ALLSOURCES) $(DISTDIR) + install -p $(ALLSOURCES) $(DISTDIR) + install -p $(ALLSOURCES:.c=-help.pd) $(DISTDIR) + test -z "$(EXTRA_DIST)" || \ + install -p $(EXTRA_DIST) $(DISTDIR) + tar --exclude-vcs -czpf $(DISTDIR).tar.gz $(DISTDIR) etags: @@ -169,3 +200,4 @@ showpaths: @echo "SOURCES: $(SOURCES)" @echo "UNAME: $(UNAME)" @echo "CPU: $(CPU)" + diff --git a/install-sh b/install-sh deleted file mode 100644 index e9de238..0000000 --- a/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 |