5 files changed, 0 insertions, 1614 deletions
diff --git a/weightmap/config/Makefile.am b/weightmap/config/Makefile.am
deleted file mode 100644
index b49d6df..0000000
--- a/weightmap/config/Makefile.am
+++ /dev/null
@@ -1,66 +0,0 @@
-## File: config/Makefile.am
-## Package: weightmap
-## Description:
-##   + automake file for 'config' package-subdir
-##
-## Process this file with Automake to create Makefile.in.
-##-----------------------------------------------------------------------
-
-##-----------------------------------------------------------------------
-## Variables: options
-##-----------------------------------------------------------------------
-
-##-----------------------------------------------------------------------
-## Variables: cleanup
-##-----------------------------------------------------------------------
-
-## --- mostlyclean: built by 'make' & commonly rebuilt
-#MOSTLYCLEANFILES = 
-
-## --- clean:  built by 'make'
-#CLEANFILES = 
-
-## --- distclean: built by 'configure'
-#DISTCLEANFILES = 
-
-## -- maintainerclean: built by maintainer / by hand
-MAINTAINERCLEANFILES = \
-	*~ .*~ \
-	compile Makefile Makefile.in \
-	config.guess \
-	config.sub \
-	depcomp \
-	install-sh \
-	ltmain.sh \
-	missing \
-	mkinstalldirs \
-	texinfo.tex \
-	ylwrap
-
-
-##-----------------------------------------------------------------------
-## Variables: distribution
-##-----------------------------------------------------------------------
-
-## --- extra distribution files
-EXTRA_DIST = \
-	Makefile.in \
-	depcomp \
-	install-sh \
-	$(wildcard mkinstalldirs) \
-	missing
-
-#	config.guess
-#	config.sub
-#	ltmain.sh
-#	texinfo.tex
-
-## --- recursion subdirectories for 'make dist'
-#DIST_SUBDIRS = $(SUBDIRS)
-
-#-----------------------------------------------------------------------
-# Rules: cleanup
-#-----------------------------------------------------------------------
-.PHONY: cvsclean cvsclean-hook
-
-cvsclean: maintainer-clean ;
diff --git a/weightmap/config/Makefile.in b/weightmap/config/Makefile.in
deleted file mode 100644
index a05e281..0000000
--- a/weightmap/config/Makefile.in
+++ /dev/null
@@ -1,335 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#MOSTLYCLEANFILES = 
-
-#CLEANFILES = 
-
-#DISTCLEANFILES = 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = config
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in depcomp \
-	install-sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/src/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AFLAGS = @AFLAGS@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUGREPORT = @BUGREPORT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG = @DEBUG@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DFLAGS = @DFLAGS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EXEEXT = @EXEEXT@
-IFLAGS = @IFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LFLAGS = @LFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-OFLAGS = @OFLAGS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PDEXT = @PDEXT@
-PD_OBJECT_EXTERNALS = @PD_OBJECT_EXTERNALS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-WFLAGS = @WFLAGS@
-ac_ct_CC = @ac_ct_CC@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pddir = @pddir@
-pddocdir = @pddocdir@
-pdexternsdir = @pdexternsdir@
-pdfdir = @pdfdir@
-pdincludedir = @pdincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-MAINTAINERCLEANFILES = \
-	*~ .*~ \
-	compile Makefile Makefile.in \
-	config.guess \
-	config.sub \
-	depcomp \
-	install-sh \
-	ltmain.sh \
-	missing \
-	mkinstalldirs \
-	texinfo.tex \
-	ylwrap
-
-EXTRA_DIST = \
-	Makefile.in \
-	depcomp \
-	install-sh \
-	$(wildcard mkinstalldirs) \
-	missing
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  config/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  config/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-info-am
-
-
-#	config.guess
-#	config.sub
-#	ltmain.sh
-#	texinfo.tex
-
-#DIST_SUBDIRS = $(SUBDIRS)
-
-#-----------------------------------------------------------------------
-# Rules: cleanup
-#-----------------------------------------------------------------------
-.PHONY: cvsclean cvsclean-hook
-
-cvsclean: maintainer-clean ;
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/weightmap/config/depcomp b/weightmap/config/depcomp
deleted file mode 100755
index 04701da..0000000
--- a/weightmap/config/depcomp
+++ /dev/null
@@ -1,530 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2005-07-09.11
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-  stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/weightmap/config/install-sh b/weightmap/config/install-sh
deleted file mode 100755
index 4d4a951..0000000
--- a/weightmap/config/install-sh
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2005-05-14.22
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
-	break;;
-  esac
-done
-
-if test -z "$1"; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
-  else
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dst=$dst/`basename "$src"`
-    fi
-  fi
-
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
-  # Make sure that the destination directory exists.
-
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
-
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
-
-    pathcomp=
-
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
-      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
-      fi
-      pathcomp=$pathcomp/
-    done
-  fi
-
-  if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
-  else
-    dstfile=`basename "$dst"`
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
-
-    # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit 1; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit 0
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/weightmap/config/missing b/weightmap/config/missing
deleted file mode 100755
index 894e786..0000000
--- a/weightmap/config/missing
+++ /dev/null
@@ -1,360 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2005-06-08.21
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End: