Removed original Firmata Arduino firmware, since it is now part of the Arduino

SVN:

http://svn.berlios.de/svnroot/repos/arduino/trunk/hardware/firmwares/Firmata/

svn path=/trunk/externals/hardware/arduino/; revision=9593

2 files changed, 0 insertions, 583 deletions

diff --git a/Pd_firmware/Makefile b/Pd_firmware/Makefile
deleted file mode 100644
index 3d1aaa6..0000000
--- a/Pd_firmware/Makefile
+++ /dev/null
@@ -1,260 +0,0 @@
-# Arduino makefile
-#
-# This makefile allows you to build sketches from the command line
-# without the Arduino environment (or Java).
-#
-# The Arduino environment does preliminary processing on a sketch before
-# compiling it.  If you're using this makefile instead, you'll need to do
-# a few things differently:
-#
-#   - Give your program's file a .cpp extension (e.g. foo.cpp).
-#
-#   - Put this line at top of your code: #include <WProgram.h>
-#
-#   - Write prototypes for all your functions (or define them before you
-#     call them).  A prototype declares the types of parameters a
-#     function will take and what type of value it will return.  This
-#     means that you can have a call to a function before the definition
-#     of the function.  A function prototype looks like the first line of
-#     the function, with a semi-colon at the end.  For example:
-#     int digitalRead(int pin);
-#
-# Instructions for using the makefile:
-#
-#  1. Copy this file into the folder with your sketch.
-#
-#  2. Below, modify the line containing "TARGET" to refer to the name of
-#     of your program's file without an extension (e.g. TARGET = foo).
-#
-#  3. Modify the line containg "ARDUINO" to point the directory that
-#     contains the Arduino core (for normal Arduino installations, this
-#     is the lib/targets/arduino sub-directory).
-#
-#  4. Modify the line containing "PORT" to refer to the filename
-#     representing the USB or serial connection to your Arduino board
-#     (e.g. PORT = /dev/tty.USB0).  If the exact name of this file
-#     changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*).
-#
-#  5. At the command line, change to the directory containing your
-#     program's file and the makefile.
-#
-#  6. Type "make" and press enter to compile/verify your program.
-#
-#  7. Type "make upload", reset your Arduino board, and press enter  to
-#     upload your program to the Arduino board.
-#
-# $Id: Makefile,v 1.7 2007-04-13 05:28:23 eighthave Exp $
-
-PORT = /dev/tty.usbserial-*
-TARGET = Pd_firmware
-ARDUINO = /Applications/arduino-0007
-ARDUINO_SRC = $(ARDUINO)/lib/targets/arduino
-ARDUINO_LIB_SRC = $(ARDUINO)/lib/targets/libraries
-INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/tools/avr/avr/include \
-	-I$(ARDUINO)/lib/targets/libraries/EEPROM \
-	-I$(ARDUINO)/lib/targets/libraries/Firmata \
-	-I$(ARDUINO)/lib/targets/libraries
-SRC = $(ARDUINO_SRC)/pins_arduino.c $(ARDUINO_SRC)/wiring.c \
-	$(ARDUINO_SRC)/WInterrupts.c
-CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \
-	$(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \
-	$(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \
-	$(ARDUINO_SRC)/WRandom.cpp
-MCU = atmega8
-F_CPU = 16000000
-FORMAT = ihex
-UPLOAD_RATE = 19200
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-DEBUG = stabs
-
-OPT = s
-
-# Place -D or -U options here
-CDEFS = -DF_CPU=$(F_CPU)
-CXXDEFS = -DF_CPU=$(F_CPU)
-
-# Compiler flag to set the C Standard level.
-# c89   - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99   - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
-#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-
-CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
-CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT)
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
-LDFLAGS = 
-
-
-# Programming support using avrdude. Settings and variables.
-AVRDUDE_PROGRAMMER = stk500
-AVRDUDE_PORT = $(PORT)
-AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
-AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
-  -b $(UPLOAD_RATE) -q -V
-
-# Program settings
-CC = avr-gcc
-CXX = avr-g++
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Define all object files.
-OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: build
-	echo 'close;' | /Applications/Pd-0.39.2-extended-RC1.app/Contents/Resources/bin/pdsend 34567 || true
-	say "press the button"
-	make upload
-
-build: applet_files elf hex
-
-applet_files:
-	test -d applet || mkdir applet
-	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
-	echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp
-	sed -n 's|^\(void .*)\).*|\1;|p' Pd_firmware.pde | grep -v 'setup()' | \
-		grep -v 'loop()' >> applet/$(TARGET).cpp
-	cat $(TARGET).pde >> applet/$(TARGET).cpp
-
-elf: applet/$(TARGET).elf
-hex: applet/$(TARGET).hex
-eep: applet/$(TARGET).eep
-lss: applet/$(TARGET).lss 
-sym: applet/$(TARGET).sym
-
-# Program the device.  
-upload: applet/$(TARGET).hex
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000 
-
-
-coff: applet/$(TARGET).elf
-	$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof
-
-
-extcoff: applet/$(TARGET).elf
-	$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym
-
-.elf.hex:
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.eep:
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
-	$(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
-	$(NM) -n $< > $@
-
-
-
-# Link: create ELF output file from object files.
-applet/$(TARGET).elf: $(OBJ)
-	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C++ source files.
-.cpp.o:
-	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
-
-# Compile: create object files from C source files.
-.c.o:
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
-
-
-# Compile: create assembler files from C source files.
-.c.s:
-	$(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-.S.o:
-	$(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-
-# Target: clean project.
-clean:
-	$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
-	$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss \
-	$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
-	find $(ARDUINO)/lib/ -name '*.o' -delete
-
-depend:
-	if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \
-	then \
-		sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \
-			$(MAKEFILE).$$$$ && \
-		$(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \
-	fi
-	echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \
-		>> $(MAKEFILE); \
-	$(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE)
-
-.PHONY:	all build elf hex eep lss sym program coff extcoff clean depend
-
-# for emacs
-etags:
-	make etags_`uname -s`
-	etags *.pde \
-		$(ARDUINO_SRC)/*.[ch] \
-		$(ARDUINO_SRC)/*.cpp \
-		$(ARDUINO)/lib/targets/libraries/*/*.[ch] \
-		$(ARDUINO)/lib/targets/libraries/*/*.cpp \
-		$(ARDUINO)/tools/avr/avr/include/avr/*.[ch] \
-		$(ARDUINO)/tools/avr/avr/include/*.[ch]
-
-etags_Darwin:
-#	etags -a 
-
-etags_Linux:
-#	etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h
-
-etags_MINGW:
-#	etags -a /usr/include/*.h /usr/include/sys/*.h 
-
-
-
diff --git a/Pd_firmware/Pd_firmware.pde b/Pd_firmware/Pd_firmware.pde
deleted file mode 100644
index 62affa3..0000000
--- a/Pd_firmware/Pd_firmware.pde
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Copyright (C) 2006 Free Software Foundation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * See file LICENSE for further informations on licensing terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * -----------------------------------------------------------
- * Firmata, the general purpose sensorbox firmware for Arduino
- * -----------------------------------------------------------
- * 
- * Firmata turns the Arduino into a Plug-n-Play sensorbox, servo
- * controller, and/or PWM motor/lamp controller.
- *
- * It was originally designed to work with the Pd object [arduino]
- * which is included in Pd-extended.  This firmware is intended to
- * work with any host computer software package.  It can easily be
- * used with other programs like Max/MSP, Processing, or whatever can
- * do serial communications.
- *
- * @author: Hans-Christoph Steiner <hans@at.or.at>
- *   help with initial protocol redesign: Jamie Allen <jamie@heavyside.net>
- *   much protocol discussion: the Arduino developers mailing list
- *   key bugfixes: Georg Holzmann <grh@mur.at>
- *                 Gerda Strobl <gerda.strobl@student.tugraz.at>
- * @date: 2006-05-19
- * @locations: STEIM, Amsterdam, Netherlands
- *             IDMI/Polytechnic University, Brookyn, NY, USA
- *             Electrolobby Ars Electronica, Linz, Austria
- *
- * See http://www.arduino.cc/playground/Interfacing/Firmata for docs
- */
-
-/* 
- * TODO: add pulseOut functionality for servos
- * TODO: add software PWM for servos, etc (servo.h or pulse.h)
- * TODO: add device type reporting (i.e. some firmwares will use the Firmata
- *       protocol, but will only support specific devices, like ultrasound 
- *       rangefinders or servos)
- * TODO: use Program Control to load stored profiles from EEPROM
- */
-
-/* cvs version: $Id: Pd_firmware.pde,v 1.32 2007-06-27 20:59:24 eighthave Exp $ */
-
-#include <EEPROM.h>
-#include <Firmata.h>
-
-/*==============================================================================
- * GLOBAL VARIABLES
- *============================================================================*/
-
-/* input message handling */
-byte waitForData = 0; // this flag says the next serial input will be data
-byte executeMultiByteCommand = 0; // execute this after getting multi-byte data
-byte multiByteChannel = 0; // channel data for multiByteCommands
-byte storedInputData[MAX_DATA_BYTES] = {0,0}; // multi-byte data
-/* digital pins */
-boolean reportDigitalInputs = false; // output digital inputs or not
-int digitalInputs;
-int previousDigitalInputs; // previous output to test for change
-unsigned int digitalPinStatus = 65535; // store pin status, default OUTPUT
-/* PWM/analog outputs */
-int pwmStatus = 0; // bitwise array to store PWM status
-/* analog inputs */
-int analogInputsToReport = 0; // bitwise array to store pin reporting
-int analogPin = 0; // counter for reading analog pins
-/* timer variables */
-extern volatile unsigned long timer0_overflow_count; // timer0 from wiring.c
-unsigned long nextExecuteTime; // for comparison with timer0_overflow_count
-
-/*==============================================================================
- * FUNCTIONS                                                                
- *============================================================================*/
-
-/* -----------------------------------------------------------------------------
- * output digital bytes received from the serial port  */
-void outputDigitalBytes(byte pin0_6, byte pin7_13) {
-  int i;
-  int mask;
-  int twoBytesForPorts;
-    
-// this should be converted to use PORTs
-  twoBytesForPorts = pin0_6 + (pin7_13 << 7);
-  for(i=2; i<TOTAL_DIGITAL_PINS; ++i) { // ignore Rx,Tx pins (0 and 1)
-    mask = 1 << i;
-    if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) {
-      digitalWrite(i, twoBytesForPorts & mask ? HIGH : LOW);
-    } 
-  }
-}
-
-/* -----------------------------------------------------------------------------
- * check all the active digital inputs for change of state, then add any events
- * to the Serial output queue using Serial.print() */
-void checkDigitalInputs(void) {
-  if(reportDigitalInputs) {
-	 previousDigitalInputs = digitalInputs;
-	 digitalInputs = PINB << 8;  // get pins 8-13
-	 digitalInputs += PIND;      // get pins 0-7
-	 digitalInputs = digitalInputs &~ digitalPinStatus; // ignore pins set OUTPUT
-	 if(digitalInputs != previousDigitalInputs) {
-		// TODO: implement more ports as channels for more than 16 digital pins
-		Firmata.sendDigitalPortPair(0, digitalInputs); // port 0 till more are implemented
-		/*		Serial.print(DIGITAL_MESSAGE,BYTE);
-		Serial.print(digitalInputs % 128, BYTE); // Tx pins 0-6
-		Serial.print(digitalInputs >> 7, BYTE);  // Tx pins 7-13*/
-	 }
-  }
-}
-
-// -----------------------------------------------------------------------------
-/* sets the pin mode to the correct state and sets the relevant bits in the
- * two bit-arrays that track Digital I/O and PWM status
- */
-void setPinMode(byte pin, byte mode) {
-  if(pin > 1) { // ignore RxTx pins (0,1)
-	if(mode == INPUT) {
-	  digitalPinStatus = digitalPinStatus &~ (1 << pin);
-	  pwmStatus = pwmStatus &~ (1 << pin);
-	  digitalWrite(pin,LOW); // turn off pin before switching to INPUT
-	  pinMode(pin,INPUT);
-	}
-	else if(mode == OUTPUT) {
-	  digitalPinStatus = digitalPinStatus | (1 << pin);
-	  pwmStatus = pwmStatus &~ (1 << pin);
-	  pinMode(pin,OUTPUT);
-	}
-	else if( mode == PWM ) {
-	  digitalPinStatus = digitalPinStatus | (1 << pin);
-	  pwmStatus = pwmStatus | (1 << pin);
-	  pinMode(pin,OUTPUT);
-	}
-  // TODO: save status to EEPROM here, if changed
-  }
-}
-
-// -----------------------------------------------------------------------------
-/* sets bits in a bit array (int) to toggle the reporting of the analogIns
- */
-void setAnalogPinReporting(byte pin, byte state) {
-  if(state == 0) {
-    analogInputsToReport = analogInputsToReport &~ (1 << pin);
-  }
-  else { // everything but 0 enables reporting of that pin
-    analogInputsToReport = analogInputsToReport | (1 << pin);
-  }
-  // TODO: save status to EEPROM here, if changed
-}
-
-/* -----------------------------------------------------------------------------
- * processInput() is called whenever a byte is available on the
- * Arduino's serial port.  This is where the commands are handled. */
-void processInput(int inputData) {
-  int command;
-  
-  // a few commands have byte(s) of data following the command
-  if( (waitForData > 0) && (inputData < 128) ) {  
-    waitForData--;
-    storedInputData[waitForData] = inputData;
-    if( (waitForData==0) && executeMultiByteCommand ) { // got the whole message
-      switch(executeMultiByteCommand) {
-      case ANALOG_MESSAGE:
-		setPinMode(multiByteChannel,PWM);
-		analogWrite(multiByteChannel, 
-		(storedInputData[0] << 7) + storedInputData[1] );
-        break;
-      case DIGITAL_MESSAGE:
-		outputDigitalBytes(storedInputData[1], storedInputData[0]); //(LSB, MSB)
-		break;
-      case SET_DIGITAL_PIN_MODE:
-		setPinMode(storedInputData[1], storedInputData[0]); // (pin#, mode)
-		if(storedInputData[0] == INPUT) 
-		  reportDigitalInputs = true; // enable reporting of digital inputs
-        break;
-      case REPORT_ANALOG_PIN:
-		setAnalogPinReporting(multiByteChannel,storedInputData[0]);
-        break;
-      case REPORT_DIGITAL_PORTS:
-		// TODO: implement MIDI channel as port base for more than 16 digital inputs
-		if(storedInputData[0] == 0)
-		  reportDigitalInputs = false;
-		else
-		  reportDigitalInputs = true;
-        break;
-      }
-      executeMultiByteCommand = 0;
-    }	
-  } else {
-    // remove channel info from command byte if less than 0xF0
-    if(inputData < 0xF0) {
-      command = inputData & 0xF0;
-	  multiByteChannel = inputData & 0x0F;
-    } else {
-      command = inputData;
-	  // commands in the 0xF* range don't use channel data
-    }
-    switch (command) { // TODO: these needs to be switched to command
-    case ANALOG_MESSAGE:
-    case DIGITAL_MESSAGE:
-    case SET_DIGITAL_PIN_MODE:
-      waitForData = 2; // two data bytes needed
-      executeMultiByteCommand = command;
-      break;
-    case REPORT_ANALOG_PIN:
-    case REPORT_DIGITAL_PORTS:
-      waitForData = 1; // two data bytes needed
-      executeMultiByteCommand = command;
-      break;
-    case SYSTEM_RESET:
-      // this doesn't do anything yet
-      break;
-    case REPORT_VERSION:
-	  Firmata.printVersion();
-      break;
-    }
-  }
-}
-
-/* -----------------------------------------------------------------------------
- * this function checks to see if there is data waiting on the serial port 
- * then processes all of the stored data
- */
-void checkForSerialReceive() {
-  while(Serial.available())
-	processInput(Serial.read());
-}
-
-/* -----------------------------------------------------------------------------
- * these functions are for loading and saving the state of the digital pins and
- * pin reporting so that the Arduino will start up again in the same state. The
- * EEPROM is supposed to have a life of at least 100,000 writes.
- */
-void loadSettings() {
-	//EEPROM.read();
-}
-
-void saveSettings() {
-	EEPROM.write(ANALOGINPUTSTOREPORT_LOW_BYTE, analogInputsToReport & 0xFF);
-	EEPROM.write(ANALOGINPUTSTOREPORT_HIGH_BYTE, analogInputsToReport >> 8);
-	EEPROM.write(REPORTDIGITALINPUTS_BYTE, reportDigitalInputs & 0xFF);
-	EEPROM.write(DIGITALPINSTATUS_LOW_BYTE, digitalPinStatus & 0xFF);
-	EEPROM.write(DIGITALPINSTATUS_HIGH_BYTE, digitalPinStatus >> 8);
-	EEPROM.write(PWMSTATUS_LOW_BYTE, pwmStatus & 0xFF);
-	EEPROM.write(PWMSTATUS_HIGH_BYTE, pwmStatus >> 8);
-}
-
-// =============================================================================
-// used for flashing the pin for the version number
-void pin13strobe(int count, int onInterval, int offInterval) {
-  byte i;
-  pinMode(13, OUTPUT);
-  for(i=0; i<count; i++) {
-    delay(offInterval);
-    digitalWrite(13,1);
-    delay(onInterval);
-    digitalWrite(13,0);
-  }
-}
-
-/*==============================================================================
- * SETUP()
- *============================================================================*/
-void setup() {
-  byte i;
-
-  // flash the pin 13 with the protocol version
-  pinMode(13,OUTPUT);
-  pin13strobe(2,1,4); // separator, a quick burst
-  delay(500);
-  pin13strobe(FIRMATA_MAJOR_VERSION, 200, 400);
-  delay(500);
-  pin13strobe(2,1,4); // separator, a quick burst
-  delay(500);
-  pin13strobe(FIRMATA_MINOR_VERSION, 200, 400);
-  delay(500);
-  pin13strobe(2,1,4); // separator, a quick burst
-
-  for(i=0; i<TOTAL_DIGITAL_PINS; ++i) {
-    setPinMode(i,OUTPUT);
-  }
-  // TODO: load state from EEPROM here
-
-  /* TODO: send digital inputs here, if enabled, to set the initial state on the
-   * host computer, since once in the loop(), the Arduino will only send data on
-   * change. */
-}
-
-/*==============================================================================
- * LOOP()
- *============================================================================*/
-void loop() {
-/* DIGITALREAD - as fast as possible, check for changes and output them to the
- * FTDI buffer using Serial.print()  */
-  checkDigitalInputs();  
-  if(timer0_overflow_count > nextExecuteTime) {  
-	nextExecuteTime = timer0_overflow_count + 19; // run this every 20ms
-	/* SERIALREAD - Serial.read() uses a 128 byte circular buffer, so handle
-	 * all serialReads at once, i.e. empty the buffer */
-	checkForSerialReceive();
-	/* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over
-	 * 60 bytes. use a timer to sending an event character every 4 ms to
-	 * trigger the buffer to dump. */
-	
-	/* ANALOGREAD - right after the event character, do all of the
-	 * analogReads().  These only need to be done every 4ms. */
-	for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) {
-	  if( analogInputsToReport & (1 << analogPin) ) 
-		  Firmata.sendAnalog(analogPin, analogRead(analogPin));
-	}
-  }
-}