aboutsummaryrefslogtreecommitdiff
path: root/PICduino
diff options
context:
space:
mode:
authorMartin Peach <mrpeach@users.sourceforge.net>2006-10-30 16:02:31 +0000
committerMartin Peach <mrpeach@users.sourceforge.net>2006-10-30 16:02:31 +0000
commit2550fff6cf5d49c028accc9b3fefe84a652f1dd4 (patch)
treea6037703b82002dc4414508c20a018e0ff0de948 /PICduino
parent91ec59f37953c3201c844202f8b5316bc82382c4 (diff)
Added hardware PWM on digital pins 9,10,11
svn path=/trunk/externals/hardware/arduino/; revision=6189
Diffstat (limited to 'PICduino')
-rwxr-xr-xPICduino/f767duino.asm146
1 files changed, 138 insertions, 8 deletions
diff --git a/PICduino/f767duino.asm b/PICduino/f767duino.asm
index 57a5a0b..56ad270 100755
--- a/PICduino/f767duino.asm
+++ b/PICduino/f767duino.asm
@@ -1,6 +1,10 @@
;********************************************************
; *
; Filename: f767duino.asm *
+; Date: 20061023 *
+; File Version: 0.7 *
+; implement analogWrite for hardware pwm on *
+; digital pins 9,10 and 11. *
; Date: 20061016 *
; File Version: 0.6 *
; Fixed a bug in receive interrupt handler and *
@@ -60,11 +64,17 @@
; AnalogInput5 = RB3/AN9 *
; VRef = RA3/AN3 *
; *
-; Timing parameters:
+; Timing parameters using PIC16F767:
; FOsc = 14745600Hz
-; TOsc = 67.8ns
-; Tad = 2.17us, Tcnv = 26.04us
+; TOsc = 67.8168ns
+; Tad = 32*TOsc = 2.17014us, Tcnv = 12*Tad = 26.0417us Taqu = 12*Tad = 26.0417us
; ADC needs 20us (~10Tad) to charge the sampling capacitor + 2Tad(~5us) after each conversion
+; Total adc time = 26*Tad = 56.4236us
+; Maximum ADC rate (1 channel) = 17723.1 conversions per second
+;
+; Baud rate is 19200
+; ADC conversion packet length 3 bytes = 30 bits
+; Time to transmit 30 bits at 19200 baud: 0.0015625s = 640 results per second
;********************************************
; This is based on Pd_firmware_pde
; Copyright (C) 2006 Hans-Christoph Steiner
@@ -427,6 +437,15 @@ slp_1
;6. Read A/D Result registers (ADRESH:ADRESL); clear bit ADIF (if required).
;7. For next conversion, go to step 1 or step 2 as required. The A/D conversion time per bit is
; defined as TAD. A minimum wait of 2 TAD is required before the next acquisition starts.
+;
+; Setup Timer2 for hardware PWM (1.002kHz: timer prescale 1:16, PR2=254)
+ movlw d'254' ; 903.53Hz
+ bsf STATUS,RP0 ; bank 1
+ movwf PR2
+ bcf STATUS,RP0 ; bank 0
+ movlw b'00000111' ; timer on, prescale 1:16
+ movwf T2CON
+;
; }
;}
;
@@ -1342,25 +1361,136 @@ processInput ; on entry w contains a byte of input data from rxBuf
mb_enablePwm
; case ENABLE_PWM: ; 251
; setPinMode(storedInputData[1],PWM);
- movf storedInputData1,w
- movwf pin
movlw PWM
movwf mode
+ movf storedInputData1,w
+ movwf pin
+ sublw d'9' ; 9-PIN pins 9,10,11 only
+ btfsc STATUS,Z
+ goto setPWM9
+ addlw d'1'
+ btfsc STATUS,Z
+ goto setPWM10
+ addlw d'1'
+ btfss STATUS,Z
+ goto pi_6 ; not a hardware PWM pin
+setPWM11
+ call setPinMode
+ movf storedInputData0,w
+ movwf CCPR2L
+ movlw b'00001100' ; PWM mode, PWM LSBs=00
+ movwf CCP2CON
+ goto pi_6
+setPWM10
+ call setPinMode
+ movf storedInputData0,w
+ movwf CCPR1L
+ movlw b'00001100' ; PWM mode, PWM LSBs=00
+ movwf CCP1CON
+ goto pi_6
+setPWM9
call setPinMode
+ movf storedInputData0,w
+ bsf STATUS,RP0 ; bank 1
+ movwf CCPR3L
+ movlw b'00001100' ; PWM mode, PWM LSBs=00
+ movwf CCP3CON
+ bcf STATUS,RP0 ; bank 0
+ goto pi_6
+
; analogWrite(storedInputData[1], storedInputData[0]);
+; analogWrite from wiring.c (http://svn.berlios.de/svnroot/repos/arduino/trunk/targets/arduino/wiring.c):
+;// Right now, PWM output only works on the pins with
+;// hardware support. These are defined in the appropriate
+;// pins_*.c file. For the rest of the pins, we default
+;// to digital output.
+;void analogWrite(int pin, int val)
+;{
+; // We need to make sure the PWM output is enabled for those pins
+; // that support it, as we turn it off when digitally reading or
+; // writing with them. Also, make sure the pin is in output mode
+; // for consistenty with Wiring, which doesn't require a pinMode
+; // call for the analog output pins.
+; pinMode(pin, OUTPUT);
+;
+; if (analogOutPinToTimer(pin) == TIMER1A) {
+; // connect pwm to pin on timer 1, channel A
+; sbi(TCCR1A, COM1A1);
+; // set pwm duty
+; OCR1A = val;
+; } else if (analogOutPinToTimer(pin) == TIMER1B) {
+; // connect pwm to pin on timer 1, channel B
+; sbi(TCCR1A, COM1B1);
+; // set pwm duty
+; OCR1B = val;
+;#if defined(__AVR_ATmega168__)
+; } else if (analogOutPinToTimer(pin) == TIMER0A) {
+; // connect pwm to pin on timer 0, channel A
+; sbi(TCCR0A, COM0A1);
+; // set pwm duty
+; OCR0A = val;
+; } else if (analogOutPinToTimer(pin) == TIMER0B) {
+; // connect pwm to pin on timer 0, channel B
+; sbi(TCCR0A, COM0B1);
+; // set pwm duty
+; OCR0B = val;
+; } else if (analogOutPinToTimer(pin) == TIMER2A) {
+; // connect pwm to pin on timer 2, channel A
+; sbi(TCCR2A, COM2A1);
+; // set pwm duty
+; OCR2A = val;
+; } else if (analogOutPinToTimer(pin) == TIMER2B) {
+; // connect pwm to pin on timer 2, channel B
+; sbi(TCCR2A, COM2B1);
+; // set pwm duty
+; OCR2B = val;
+;#else
+; } else if (analogOutPinToTimer(pin) == TIMER2) {
+; // connect pwm to pin on timer 2, channel B
+; sbi(TCCR2, COM21);
+; // set pwm duty
+; OCR2 = val;
+;#endif
+; } else if (val < 128)
+; digitalWrite(pin, LOW);
+; else
+; digitalWrite(pin, HIGH);
+;}
+; end of analogWrite() from wiring.c
; break;
goto pi_6
; -------------------------------------------------------------------------
mb_disablePwm
; case DISABLE_PWM: ; 250
; setPinMode(storedInputData[0],INPUT);
- movf storedInputData0,w
- movwf pin
movlw INPUT
movwf mode
+ movf storedInputData0,w
+ movwf pin
+ sublw d'9' ; 9 - PIN, pins 9,10,11 only
+ btfsc STATUS,Z
+ goto disPWM9
+ addlw d'1'
+ btfsc STATUS,Z
+ goto disPWM10
+ addlw d'1'
+ btfss STATUS,Z
+ goto pi_6 ; not a hardware PWM pin
+disPWM11
+ call setPinMode
+ clrf CCP2CON
+ goto pi_6 ; not a hardware PWM pin
+disPWM10
call setPinMode
+ clrf CCP1CON
+ goto pi_6 ; not a hardware PWM pin
+disPWM9
+ call setPinMode
+ bsf STATUS,RP0 ; bank 1
+ clrf CCP3CON
+ bcf STATUS,RP0 ; bank 0
+ goto pi_6 ; not a hardware PWM pin
; break;
- goto pi_6
; -------------------------------------------------------------------------
mb_enableSoftPwm
; case ENABLE_SOFTWARE_PWM: ; 253