aboutsummaryrefslogtreecommitdiff
path: root/Pd_firmware
diff options
context:
space:
mode:
authorHans-Christoph Steiner <eighthave@users.sourceforge.net>2006-10-30 05:44:00 +0000
committerHans-Christoph Steiner <eighthave@users.sourceforge.net>2006-10-30 05:44:00 +0000
commit91ec59f37953c3201c844202f8b5316bc82382c4 (patch)
tree00fb824e012332e0b233e8ea364999db8a675989 /Pd_firmware
parent427db308048814ee3fb1bc21946397320e29bde5 (diff)
removed unimplemented software PWM stuff for cleanliness; made arduino blink pin 13 on startup to represent the protocol version
svn path=/trunk/externals/hardware/arduino/; revision=6183
Diffstat (limited to 'Pd_firmware')
-rw-r--r--Pd_firmware/Pd_firmware.pde441
1 files changed, 203 insertions, 238 deletions
diff --git a/Pd_firmware/Pd_firmware.pde b/Pd_firmware/Pd_firmware.pde
index 884d77b..a314150 100644
--- a/Pd_firmware/Pd_firmware.pde
+++ b/Pd_firmware/Pd_firmware.pde
@@ -39,7 +39,7 @@
*/
/*
- * TODO: add pulseOut functionality
+ * TODO: add pulseOut functionality for servos
* TODO: add software PWM for servos, etc (servo.h or pulse.h)
* TODO: redesign protocol to accomodate boards with more I/Os
* TODO:
@@ -49,8 +49,9 @@
/* firmware version numbers. The protocol is still changing, so these version
* numbers are important */
+// cvs version: $Id $
#define MAJOR_VERSION 0
-#define MINOR_VERSION 1
+#define MINOR_VERSION 2
/* firmata protocol
* ===============
@@ -140,19 +141,9 @@
/* analog input message format
* ----------------------
- * 0 analog input marker (160 + number of pins to report)
- * 1 high byte from analog input pin 0
- * 2 low byte from analog input pin 0
- * 3 high byte from analog input pin 1
- * 4 low byte from analog input pin 1
- * 5 high byte from analog input pin 2
- * 6 low byte from analog input pin 2
- * 7 high byte from analog input pin 3
- * 8 low byte from analog input pin 3
- * 9 high byte from analog input pin 4
- * 10 low byte from analog input pin 4
- * 11 high byte from analog input pin 5
- * 12 low byte from analog input pin 5
+ * 0 analog input marker (160 + pin number reported)
+ * 1 high byte from analog input
+ * 2 low byte from analog input
*/
#define TOTAL_DIGITAL_PINS 14
@@ -181,10 +172,6 @@ int digitalPinStatus;
*/
int pwmStatus;
-/* this byte stores the status of whether software PWM is on or not */
-/* 00000010 00000000 means bit 10 is softWarePWM enabled */
-int softPwmStatus;
-
boolean digitalInputsEnabled = true;
byte analogInputsEnabled = 6;
@@ -193,14 +180,14 @@ int analogData;
// -------------------------------------------------------------------------
void transmitDigitalInput(byte startPin) {
- byte i;
- byte digitalPin;
+ byte i;
+ byte digitalPin;
// byte digitalPinBit;
- byte transmitByte = 0;
- byte digitalData;
+ byte transmitByte = 0;
+ byte digitalData;
- for(i=0;i<7;++i) {
- digitalPin = i+startPin;
+ for(i=0;i<7;++i) {
+ digitalPin = i+startPin;
/* digitalPinBit = OUTPUT << digitalPin;
// only read the pin if its set to input
if(digitalPinStatus & digitalPinBit) {
@@ -209,12 +196,12 @@ digitalData = 0; // pin set to OUTPUT, don't read
else if( (digitalPin >= 9) && (pwmStatus & (1 << digitalPin)) ) {
digitalData = 0; // pin set to PWM, don't read
}*/
- if( !(digitalPinStatus & (1 << digitalPin)) ) {
- digitalData = (byte) digitalRead(digitalPin);
- transmitByte = transmitByte + ((1 << i) * digitalData);
- }
- }
- printByte(transmitByte);
+ if( !(digitalPinStatus & (1 << digitalPin)) ) {
+ digitalData = (byte) digitalRead(digitalPin);
+ transmitByte = transmitByte + ((1 << i) * digitalData);
+ }
+ }
+ printByte(transmitByte);
}
@@ -224,47 +211,21 @@ digitalData = 0; // pin set to PWM, don't read
* bits in the two bit-arrays that track Digital I/O and PWM status
*/
void setPinMode(int pin, int mode) {
- if(mode == INPUT) {
- digitalPinStatus = digitalPinStatus &~ (1 << pin);
- pwmStatus = pwmStatus &~ (1 << pin);
- pinMode(pin,INPUT);
- }
- else if(mode == OUTPUT) {
- digitalPinStatus = digitalPinStatus | (1 << pin);
- pwmStatus = pwmStatus &~ (1 << pin);
- pinMode(pin,OUTPUT);
- }
- else if( (mode == PWM) && (pin >= 9) && (pin <= 11) ) {
- digitalPinStatus = digitalPinStatus | (1 << pin);
- pwmStatus = pwmStatus | (1 << pin);
- pinMode(pin,OUTPUT);
- }
-}
-
-void setSoftPwm (int pin, byte pulsePeriod) {
- byte i;
- /* for(i=0; i<7; ++i) {
- mask = 1 << i;
- if(digitalPinStatus & mask) {
- digitalWrite(i, inputData & mask);
- }
- }
- */
- //read timer type thing
-
- //loop through each pin, turn them on if selected
- //softwarePWMStatus
- //check timer type thing against pulsePeriods for each pin
- //throw pin low if expired
-}
-
-void setSoftPwmFreq(byte freq) {
-}
-
-
-void disSoftPwm(int pin) {
- //throw pin low
-
+ if(mode == INPUT) {
+ digitalPinStatus = digitalPinStatus &~ (1 << pin);
+ pwmStatus = pwmStatus &~ (1 << pin);
+ pinMode(pin,INPUT);
+ }
+ else if(mode == OUTPUT) {
+ digitalPinStatus = digitalPinStatus | (1 << pin);
+ pwmStatus = pwmStatus &~ (1 << pin);
+ pinMode(pin,OUTPUT);
+ }
+ else if( (mode == PWM) && (pin >= 9) && (pin <= 11) ) {
+ digitalPinStatus = digitalPinStatus | (1 << pin);
+ pwmStatus = pwmStatus | (1 << pin);
+ pinMode(pin,OUTPUT);
+ }
}
@@ -273,153 +234,149 @@ void disSoftPwm(int pin) {
* then processes all of the stored data
*/
void checkForInput() {
- if(Serial.available()) {
- while(Serial.available()) {
- processInput( (byte)Serial.read() );
- }
- }
+ if(Serial.available()) {
+ while(Serial.available()) {
+ processInput( (byte)Serial.read() );
+ }
+ }
}
/* -------------------------------------------------------------------------
* processInput() is called whenever a byte is available on the
- * Arduino's serial port. This is where the commands are handled.
+ * Arduino's serial port. This is where the comm1ands are handled.
*/
void processInput(byte inputData) {
- int i;
- int mask;
+ int i;
+ int mask;
- // a few commands have byte(s) of data following the command
- if( waitForData > 0) {
- waitForData--;
- storedInputData[waitForData] = inputData;
-
- if(executeMultiByteCommand && (waitForData==0)) {
- //we got everything
- switch(executeMultiByteCommand) {
- case ENABLE_PWM:
- setPinMode(storedInputData[1],PWM);
- analogWrite(storedInputData[1], storedInputData[0]);
- break;
- case DISABLE_PWM:
- setPinMode(storedInputData[0],INPUT);
- break;
- case ENABLE_SOFTWARE_PWM:
- setPinMode(storedInputData[1],PWM);
- setSoftPwm(storedInputData[1], storedInputData[0]);
- break;
- case DISABLE_SOFTWARE_PWM:
- disSoftPwm(storedInputData[0]);
- break;
- case SET_SOFTWARE_PWM_FREQ:
- setSoftPwmFreq(storedInputData[0]);
- break;
- }
- executeMultiByteCommand = 0;
- }
- }
- else if(inputData < 128) {
- if(firstInputByte) {
- // output data for pins 7-13
- for(i=7; i<TOTAL_DIGITAL_PINS; ++i) {
- mask = 1 << i;
- if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) {
- // inputData is a byte and mask is an int, so align the high part of mask
- digitalWrite(i, inputData & (mask >> 7));
- }
- }
- firstInputByte = false;
- }
- else { //
- for(i=0; i<7; ++i) {
- mask = 1 << i;
- if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) {
- digitalWrite(i, inputData & mask);
- }
- }
- }
- }
- else {
- switch (inputData) {
- case SET_PIN_ZERO_TO_IN: // set digital pins to INPUT
- case SET_PIN_ONE_TO_IN:
- case SET_PIN_TWO_TO_IN:
- case SET_PIN_THREE_TO_IN:
- case SET_PIN_FOUR_TO_IN:
- case SET_PIN_FIVE_TO_IN:
- case SET_PIN_SIX_TO_IN:
- case SET_PIN_SEVEN_TO_IN:
- case SET_PIN_EIGHT_TO_IN:
- case SET_PIN_NINE_TO_IN:
- case SET_PIN_TEN_TO_IN:
- case SET_PIN_ELEVEN_TO_IN:
- case SET_PIN_TWELVE_TO_IN:
- case SET_PIN_THIRTEEN_TO_IN:
- setPinMode(inputData - SET_PIN_ZERO_TO_IN, INPUT);
- break;
- case SET_PIN_ZERO_TO_OUT: // set digital pins to OUTPUT
- case SET_PIN_ONE_TO_OUT:
- case SET_PIN_TWO_TO_OUT:
- case SET_PIN_THREE_TO_OUT:
- case SET_PIN_FOUR_TO_OUT:
- case SET_PIN_FIVE_TO_OUT:
- case SET_PIN_SIX_TO_OUT:
- case SET_PIN_SEVEN_TO_OUT:
- case SET_PIN_EIGHT_TO_OUT:
- case SET_PIN_NINE_TO_OUT:
- case SET_PIN_TEN_TO_OUT:
- case SET_PIN_ELEVEN_TO_OUT:
- case SET_PIN_TWELVE_TO_OUT:
- case SET_PIN_THIRTEEN_TO_OUT:
- setPinMode(inputData - SET_PIN_ZERO_TO_OUT, OUTPUT);
- break;
- case DISABLE_DIGITAL_INPUTS: // all digital inputs off
- digitalInputsEnabled = false;
- break;
- case ENABLE_DIGITAL_INPUTS: // all digital inputs on
- digitalInputsEnabled = true;
- break;
- case ZERO_ANALOG_INS: // analog input off
- case ONE_ANALOG_IN: // analog 0 on
- case TWO_ANALOG_INS: // analog 0,1 on
- case THREE_ANALOG_INS: // analog 0-2 on
- case FOUR_ANALOG_INS: // analog 0-3 on
- case FIVE_ANALOG_INS: // analog 0-4 on
- case SIX_ANALOG_INS: // analog 0-5 on
- case SEVEN_ANALOG_INS: // analog 0-6 on
- case EIGHT_ANALOG_INS: // analog 0-7 on
- case NINE_ANALOG_INS: // analog 0-8 on
- analogInputsEnabled = inputData - ZERO_ANALOG_INS;
- break;
- case ENABLE_PWM:
- waitForData = 2; // 2 bytes needed (pin#, dutyCycle)
- executeMultiByteCommand = inputData;
- break;
- case DISABLE_PWM:
- waitForData = 1; // 1 byte needed (pin#)
- executeMultiByteCommand = inputData;
- break;
- case SET_SOFTWARE_PWM_FREQ:
- waitForData = 1; // 1 byte needed (pin#)
- executeMultiByteCommand = inputData;
- break;
- case ENABLE_SOFTWARE_PWM:
- waitForData = 2; // 2 bytes needed (pin#, dutyCycle)
- executeMultiByteCommand = inputData;
- break;
- case DISABLE_SOFTWARE_PWM:
- waitForData = 1; // 1 byte needed (pin#)
- executeMultiByteCommand = inputData;
- break;
- case OUTPUT_TO_DIGITAL_PINS: // bytes to send to digital outputs
- firstInputByte = true;
- break;
- case REPORT_VERSION:
- printByte(REPORT_VERSION);
- printByte(MAJOR_VERSION);
- printByte(MINOR_VERSION);
- break;
- }
- }
+ // a few commands have byte(s) of data following the command
+ if( waitForData > 0) {
+ waitForData--;
+ storedInputData[waitForData] = inputData;
+
+ if(executeMultiByteCommand && (waitForData==0)) {
+ //we got everything
+ switch(executeMultiByteCommand) {
+ case ENABLE_PWM:
+ setPinMode(storedInputData[1],PWM);
+ analogWrite(storedInputData[1], storedInputData[0]);
+ break;
+ case DISABLE_PWM:
+ setPinMode(storedInputData[0],INPUT);
+ break;
+ case ENABLE_SOFTWARE_PWM:
+ break;
+ case DISABLE_SOFTWARE_PWM:
+ break;
+ case SET_SOFTWARE_PWM_FREQ:
+ break;
+ }
+ executeMultiByteCommand = 0;
+ }
+ }
+ else if(inputData < 128) {
+ if(firstInputByte) {
+ // output data for pins 7-13
+ for(i=7; i<TOTAL_DIGITAL_PINS; ++i) {
+ mask = 1 << i;
+ if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) {
+ // inputData is a byte and mask is an int, so align the high part of mask
+ digitalWrite(i, inputData & (mask >> 7));
+ }
+ }
+ firstInputByte = false;
+ }
+ else { //
+ for(i=0; i<7; ++i) {
+ mask = 1 << i;
+ if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) {
+ digitalWrite(i, inputData & mask);
+ }
+ }
+ }
+ }
+ else {
+ switch (inputData) {
+ case SET_PIN_ZERO_TO_IN: // set digital pins to INPUT
+ case SET_PIN_ONE_TO_IN:
+ case SET_PIN_TWO_TO_IN:
+ case SET_PIN_THREE_TO_IN:
+ case SET_PIN_FOUR_TO_IN:
+ case SET_PIN_FIVE_TO_IN:
+ case SET_PIN_SIX_TO_IN:
+ case SET_PIN_SEVEN_TO_IN:
+ case SET_PIN_EIGHT_TO_IN:
+ case SET_PIN_NINE_TO_IN:
+ case SET_PIN_TEN_TO_IN:
+ case SET_PIN_ELEVEN_TO_IN:
+ case SET_PIN_TWELVE_TO_IN:
+ case SET_PIN_THIRTEEN_TO_IN:
+ setPinMode(inputData - SET_PIN_ZERO_TO_IN, INPUT);
+ break;
+ case SET_PIN_ZERO_TO_OUT: // set digital pins to OUTPUT
+ case SET_PIN_ONE_TO_OUT:
+ case SET_PIN_TWO_TO_OUT:
+ case SET_PIN_THREE_TO_OUT:
+ case SET_PIN_FOUR_TO_OUT:
+ case SET_PIN_FIVE_TO_OUT:
+ case SET_PIN_SIX_TO_OUT:
+ case SET_PIN_SEVEN_TO_OUT:
+ case SET_PIN_EIGHT_TO_OUT:
+ case SET_PIN_NINE_TO_OUT:
+ case SET_PIN_TEN_TO_OUT:
+ case SET_PIN_ELEVEN_TO_OUT:
+ case SET_PIN_TWELVE_TO_OUT:
+ case SET_PIN_THIRTEEN_TO_OUT:
+ setPinMode(inputData - SET_PIN_ZERO_TO_OUT, OUTPUT);
+ break;
+ case DISABLE_DIGITAL_INPUTS: // all digital inputs off
+ digitalInputsEnabled = false;
+ break;
+ case ENABLE_DIGITAL_INPUTS: // all digital inputs on
+ digitalInputsEnabled = true;
+ break;
+ case ZERO_ANALOG_INS: // analog input off
+ case ONE_ANALOG_IN: // analog 0 on
+ case TWO_ANALOG_INS: // analog 0,1 on
+ case THREE_ANALOG_INS: // analog 0-2 on
+ case FOUR_ANALOG_INS: // analog 0-3 on
+ case FIVE_ANALOG_INS: // analog 0-4 on
+ case SIX_ANALOG_INS: // analog 0-5 on
+ case SEVEN_ANALOG_INS: // analog 0-6 on
+ case EIGHT_ANALOG_INS: // analog 0-7 on
+ case NINE_ANALOG_INS: // analog 0-8 on
+ analogInputsEnabled = inputData - ZERO_ANALOG_INS;
+ break;
+ case ENABLE_PWM:
+ waitForData = 2; // 2 bytes needed (pin#, dutyCycle)
+ executeMultiByteCommand = inputData;
+ break;
+ case DISABLE_PWM:
+ waitForData = 1; // 1 byte needed (pin#)
+ executeMultiByteCommand = inputData;
+ break;
+ case SET_SOFTWARE_PWM_FREQ:
+ waitForData = 1; // 1 byte needed (pin#)
+ executeMultiByteCommand = inputData;
+ break;
+ case ENABLE_SOFTWARE_PWM:
+ waitForData = 2; // 2 bytes needed (pin#, dutyCycle)
+ executeMultiByteCommand = inputData;
+ break;
+ case DISABLE_SOFTWARE_PWM:
+ waitForData = 1; // 1 byte needed (pin#)
+ executeMultiByteCommand = inputData;
+ break;
+ case OUTPUT_TO_DIGITAL_PINS: // bytes to send to digital outputs
+ firstInputByte = true;
+ break;
+ case REPORT_VERSION:
+ printByte(REPORT_VERSION);
+ printByte(MAJOR_VERSION);
+ printByte(MINOR_VERSION);
+ break;
+ }
+ }
}
@@ -427,35 +384,43 @@ void processInput(byte inputData) {
// -------------------------------------------------------------------------
void setup() {
- byte i;
-
- Serial.begin(19200);
- for(i=0; i<TOTAL_DIGITAL_PINS; ++i) {
- setPinMode(i,INPUT);
- }
+ byte i;
+
+// flash the pin 13 with the protocol minor version
+ pinMode(13,OUTPUT);
+ for(i-0; i<MINOR_VERSION; i++) {
+ digitalWrite(13,1);
+ delay(100);
+ digitalWrite(13,0);
+ delay(100);
+ }
+ Serial.begin(19200);
+ for(i=0; i<TOTAL_DIGITAL_PINS; ++i) {
+ setPinMode(i,INPUT);
+ }
}
// -------------------------------------------------------------------------
void loop() {
- checkForInput();
+ checkForInput();
- // read all digital pins, in enabled
- if(digitalInputsEnabled) {
- printByte(ENABLE_DIGITAL_INPUTS);
- transmitDigitalInput(7);
- checkForInput();
- transmitDigitalInput(0);
- checkForInput();
- }
-
- /* get analog in, for the number enabled */
- for(analogPin=0; analogPin<analogInputsEnabled; ++analogPin) {
- analogData = analogRead(analogPin);
- // these two bytes get converted back into the whole number in Pd
- // the higher bits should be zeroed so that the 8th bit doesn't get set
- printByte(ONE_ANALOG_IN + analogPin);
- printByte(analogData >> 7); // bitshift the big stuff into the output byte
- printByte(analogData % 128); // mod by 32 for the small byte
- checkForInput();
- }
+ // read all digital pins, in enabled
+ if(digitalInputsEnabled) {
+ printByte(ENABLE_DIGITAL_INPUTS);
+ transmitDigitalInput(7);
+ checkForInput();
+ transmitDigitalInput(0);
+ checkForInput();
+ }
+
+ /* get analog in, for the number enabled */
+ for(analogPin=0; analogPin<analogInputsEnabled; ++analogPin) {
+ analogData = analogRead(analogPin);
+ // these two bytes get converted back into the whole number in Pd
+ // the higher bits should be zeroed so that the 8th bit doesn't get set
+ printByte(ONE_ANALOG_IN + analogPin);
+ printByte(analogData >> 7); // bitshift the big stuff into the output byte
+ printByte(analogData % 128); // mod by 32 for the small byte
+ checkForInput();
+ }
}