diff options
| author | Hans-Christoph Steiner <eighthave@users.sourceforge.net> | 2007-06-27 20:59:24 +0000 |
|---|---|---|
| committer | Hans-Christoph Steiner <eighthave@users.sourceforge.net> | 2007-06-27 20:59:24 +0000 |
| commit | 3cd538e23c612ff8b60a55e26b4c2e2ad256e150 (patch) | |
| tree | e7fb1be46a7520168dd363b764168201b99120fd /Pd_firmware | |
| parent | a4d9715d0c6954c71b26ee11ade23cd0edfce4d8 (diff) | |
added the [devices( message to the test patch; applied David Mellis' patch to get things working with Arduino-0008
svn path=/trunk/externals/hardware/arduino/; revision=7801
Diffstat (limited to 'Pd_firmware')
| -rw-r--r-- | Pd_firmware/Pd_firmware.pde | 14 |
1 files changed, 5 insertions, 9 deletions
diff --git a/Pd_firmware/Pd_firmware.pde b/Pd_firmware/Pd_firmware.pde index a5b2e55..62affa3 100644 --- a/Pd_firmware/Pd_firmware.pde +++ b/Pd_firmware/Pd_firmware.pde @@ -52,7 +52,7 @@ * TODO: use Program Control to load stored profiles from EEPROM */ -/* cvs version: $Id: Pd_firmware.pde,v 1.31 2007-04-13 05:28:23 eighthave Exp $ */ +/* cvs version: $Id: Pd_firmware.pde,v 1.32 2007-06-27 20:59:24 eighthave Exp $ */ #include <EEPROM.h> #include <Firmata.h> @@ -96,7 +96,7 @@ void outputDigitalBytes(byte pin0_6, byte pin7_13) { for(i=2; i<TOTAL_DIGITAL_PINS; ++i) { // ignore Rx,Tx pins (0 and 1) mask = 1 << i; if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) { - digitalWrite(i, twoBytesForPorts & mask); + digitalWrite(i, twoBytesForPorts & mask ? HIGH : LOW); } } } @@ -107,12 +107,12 @@ void outputDigitalBytes(byte pin0_6, byte pin7_13) { void checkDigitalInputs(void) { if(reportDigitalInputs) { previousDigitalInputs = digitalInputs; - digitalInputs = _SFR_IO8(port_to_input[PB]) << 8; // get pins 8-13 - digitalInputs += _SFR_IO8(port_to_input[PD]); // get pins 0-7 + digitalInputs = PINB << 8; // get pins 8-13 + digitalInputs += PIND; // get pins 0-7 digitalInputs = digitalInputs &~ digitalPinStatus; // ignore pins set OUTPUT if(digitalInputs != previousDigitalInputs) { // TODO: implement more ports as channels for more than 16 digital pins - Firmata.sendDigital(0, digitalInputs); // port 0 till more are implemented + Firmata.sendDigitalPortPair(0, digitalInputs); // port 0 till more are implemented /* Serial.print(DIGITAL_MESSAGE,BYTE); Serial.print(digitalInputs % 128, BYTE); // Tx pins 0-6 Serial.print(digitalInputs >> 7, BYTE); // Tx pins 7-13*/ @@ -275,8 +275,6 @@ void pin13strobe(int count, int onInterval, int offInterval) { void setup() { byte i; - Serial.begin(57600); // 9600, 14400, 38400, 57600, 115200 - // flash the pin 13 with the protocol version pinMode(13,OUTPUT); pin13strobe(2,1,4); // separator, a quick burst @@ -294,8 +292,6 @@ void setup() { } // TODO: load state from EEPROM here - Firmata.printVersion(); - /* TODO: send digital inputs here, if enabled, to set the initial state on the * host computer, since once in the loop(), the Arduino will only send data on * change. */ |