better helpfile and some fixes

svn path=/trunk/externals/hardware/arduino/; revision=5868

1 files changed, 587 insertions, 413 deletions

diff --git a/arduino-help.pd b/arduino-help.pd
index ae69a06..df8708e 100644
--- a/arduino-help.pd
+++ b/arduino-help.pd
@@ -1,94 +1,331 @@
-#N canvas 812 22 683 558 10;
-#X msg 166 173 open 0;
-#N canvas 627 365 356 380 serin 0;
-#X obj 180 61 cnv 15 15 15 empty \$0-number-canvas 0 4 8 0 14 -233017
--1 0;
-#X obj 200 225 s \$0-number-canvas;
-#X obj 60 61 hradio 15 1 1 8 empty empty empty 0 -6 0 8 -225271 -1
--1 0;
-#X obj 59 337 outlet;
-#X obj 60 13 inlet;
-#X msg 200 202 label \$1;
-#X obj 200 180 makefilename %d;
-#X obj 59 108 int;
-#X obj 59 266 trigger bang anything;
-#X msg 59 206 open \$1;
-#X obj 118 302 cyclone/prepend set;
-#X connect 2 0 7 0;
-#X connect 4 0 2 0;
-#X connect 5 0 1 0;
-#X connect 6 0 5 0;
-#X connect 7 0 6 0;
-#X connect 7 0 9 0;
-#X connect 8 0 3 0;
-#X connect 8 1 10 0;
-#X connect 9 0 8 0;
-#X connect 10 0 3 0;
-#X coords 0 -1 1 1 136 17 1 60 60;
-#X restore 166 150 pd serin;
-#X text 163 132 serial port #;
-#X text 424 528 released under the GNU GPL;
-#X text 7 526 (C) Copyright 2006 Hans-Christoph Steiner <hans@at.or.at>
+#N canvas 654 0 691 634 10;
+#N canvas 233 472 450 300 INSTALL-NOTES 0;
+#X text 39 201 [comport] \, from pd-cvs/externals/iem/comport;
+#X text 39 185 [arduino] \, from pd-cvs/externals/hardware/arduino
 ;
-#X msg 226 173 close;
-#X obj 63 497 print --------------------;
-#X obj 434 321 tgl 15 0 empty empty changes 0 -6 0 8 -262144 -1 -1
-0 1;
-#X obj 353 61 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -262131 -1
--1 13;
-#X obj 330 62 tgl 15 0 empty empty empty 0 -6 0 8 -262131 -1 -1 1 1
+#X text 39 217 [speedlim] \, from iemlib \, pd-cvs/externals/iemlib
 ;
-#X obj 373 321 tgl 15 0 empty empty all 0 -6 0 8 -262144 -1 -1 0 1
+#X text 20 27 1 General information on arduino: http://www.arduino.cc
 ;
-#N canvas 514 440 628 350 decode 0;
-#X obj 241 26 inlet;
-#X obj 545 189 & 1;
-#X obj 511 189 & 2;
-#X obj 477 189 & 4;
-#X obj 545 213 tgl 15 0 empty empty 0 4 25 1 12 -262144 -1 -1 1 1;
-#X obj 511 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-2;
-#X obj 477 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-4;
-#X obj 433 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-8;
-#X obj 389 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-16;
-#X obj 314 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-64;
-#X obj 277 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-128;
-#X obj 195 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-512;
-#X obj 151 213 tgl 15 0 empty empty 10 -1 25 1 12 -262144 -1 -1 0 1024
+#X text 20 61 2 You need the firmware for Pduino: http://at.or.at/hans/pd/objects.html
 ;
-#X obj 107 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-2048;
-#X obj 63 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 4096
-4096;
-#X obj 19 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 8192
+#X text 20 109 3 Don't forget to upload the firmware onto your arduino
+board !;
+#X text 21 159 4 Pduino needs the following externals and abstractions:
 ;
-#X obj 433 189 & 8;
-#X obj 389 189 & 16;
-#X obj 351 189 & 32;
-#X obj 314 189 & 64;
-#X obj 277 189 & 128;
-#X obj 236 189 & 256;
-#X obj 195 189 & 512;
-#X obj 151 189 & 1024;
-#X obj 107 189 & 2048;
-#X obj 63 189 & 4096;
-#X obj 19 189 & 8192;
-#X obj 261 273 outlet;
-#X floatatom 296 46 5 0 0 0 - - -;
-#X obj 236 213 tgl 15 0 empty empty 8 -1 25 1 12 -262144 -1 -1 0 256
+#X text 22 257 5 If you still have troubles \, mail to the pd list
+!;
+#X restore 25 136 pd INSTALL-NOTES;
+#X text 150 137 <- read this first !;
+#X obj 402 134 arduino 5;
+#X obj 26 244 hradio 15 1 0 8 empty empty empty 0 -6 0 8 -260818 -1
+-1 5;
+#X msg 26 262 open \$1;
+#X floatatom 109 261 5 0 0 0 - - -;
+#X obj 402 113 r \$0-arduino;
+#X msg 37 283 close;
+#X msg 47 304 info;
+#X text 21 221 select/close the serial port:;
+#X obj 26 326 s \$0-arduino;
+#N canvas 728 223 550 248 DIGITAL-OUTPUT 0;
+#X text 21 78 I/O the individual pins:;
+#X obj 42 118 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 60 118 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 79 118 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 97 118 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 116 118 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 134 118 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 153 118 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 171 118 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 190 118 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 208 118 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1
 ;
-#X obj 351 213 tgl 15 0 empty empty 5 -1 25 1 12 -262144 -1 -1 32 32
+#X obj 227 118 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 1
 ;
-#X connect 0 0 1 0;
-#X connect 0 0 2 0;
-#X connect 0 0 3 0;
-#X connect 0 0 16 0;
+#X obj 245 118 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 1
+;
+#X obj 264 118 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 1
+;
+#X obj 284 98 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 1 1
+;
+#X obj 24 118 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
+#N canvas 688 388 650 300 send-to-arduino................. 0;
+#X obj 39 44 inlet;
+#X obj 79 44 inlet;
+#X obj 118 44 inlet;
+#X obj 158 44 inlet;
+#X obj 198 44 inlet;
+#X obj 238 44 inlet;
+#X obj 277 44 inlet;
+#X obj 317 44 inlet;
+#X obj 358 43 inlet;
+#X obj 398 43 inlet;
+#X obj 437 43 inlet;
+#X obj 477 43 inlet;
+#X obj 517 43 inlet;
+#X obj 556 43 inlet;
+#X obj 358 160 trigger bang float;
+#X obj 358 220 +;
+#X obj 358 183 float;
+#X obj 479 181 << 8;
+#N canvas 742 158 609 360 bytemask------------------------------ 0
+;
+#X obj 269 332 outlet;
+#X obj 269 279 float;
+#X obj 318 183 |;
+#X obj 111 239 -;
+#X obj 110 204 float;
+#X obj 110 184 trigger bang float;
+#X obj 231 204 &;
+#X obj 183 142 route 0 1;
+#X msg 36 56 \$1 1;
+#X msg 106 56 \$1 2;
+#X msg 176 56 \$1 4;
+#X msg 246 56 \$1 8;
+#X msg 316 56 \$1 16;
+#X msg 386 56 \$1 32;
+#X msg 456 56 \$1 64;
+#X msg 526 56 \$1 128;
+#X obj 36 15 inlet;
+#X obj 106 15 inlet;
+#X obj 176 15 inlet;
+#X obj 246 15 inlet;
+#X obj 316 15 inlet;
+#X obj 386 15 inlet;
+#X obj 456 15 inlet;
+#X obj 526 15 inlet;
+#X obj 36 35 change;
+#X obj 106 35 change;
+#X obj 176 35 change;
+#X obj 246 35 change;
+#X obj 316 35 change;
+#X obj 386 35 change;
+#X obj 456 35 change;
+#X obj 526 35 change;
+#X connect 1 0 2 1;
+#X connect 1 0 4 1;
+#X connect 1 0 6 1;
+#X connect 1 0 0 0;
+#X connect 2 0 1 0;
+#X connect 3 0 1 0;
+#X connect 4 0 3 0;
+#X connect 5 0 4 0;
+#X connect 5 1 6 0;
+#X connect 6 0 3 1;
+#X connect 7 0 5 0;
+#X connect 7 1 2 0;
+#X connect 8 0 7 0;
+#X connect 9 0 7 0;
+#X connect 10 0 7 0;
+#X connect 11 0 7 0;
+#X connect 12 0 7 0;
+#X connect 13 0 7 0;
+#X connect 14 0 7 0;
+#X connect 15 0 7 0;
+#X connect 16 0 24 0;
+#X connect 17 0 25 0;
+#X connect 18 0 26 0;
+#X connect 19 0 27 0;
+#X connect 20 0 28 0;
+#X connect 21 0 29 0;
+#X connect 22 0 30 0;
+#X connect 23 0 31 0;
+#X connect 24 0 8 0;
+#X connect 25 0 9 0;
+#X connect 26 0 10 0;
+#X connect 27 0 11 0;
+#X connect 28 0 12 0;
+#X connect 29 0 13 0;
+#X connect 30 0 14 0;
+#X connect 31 0 15 0;
+#X restore 39 100 pd bytemask------------------------------;
+#N canvas 742 158 609 360 bytemask------------------ 0;
+#X obj 269 332 outlet;
+#X obj 269 279 float;
+#X obj 318 183 |;
+#X obj 111 239 -;
+#X obj 110 204 float;
+#X obj 110 184 trigger bang float;
+#X obj 231 204 &;
+#X obj 183 142 route 0 1;
+#X msg 36 56 \$1 1;
+#X msg 106 56 \$1 2;
+#X msg 176 56 \$1 4;
+#X msg 246 56 \$1 8;
+#X msg 316 56 \$1 16;
+#X msg 386 56 \$1 32;
+#X msg 456 56 \$1 64;
+#X msg 526 56 \$1 128;
+#X obj 36 15 inlet;
+#X obj 106 15 inlet;
+#X obj 176 15 inlet;
+#X obj 246 15 inlet;
+#X obj 316 15 inlet;
+#X obj 386 15 inlet;
+#X obj 456 15 inlet;
+#X obj 526 15 inlet;
+#X obj 36 35 change;
+#X obj 106 35 change;
+#X obj 176 35 change;
+#X obj 246 35 change;
+#X obj 316 35 change;
+#X obj 386 35 change;
+#X obj 456 35 change;
+#X obj 526 35 change;
+#X connect 1 0 2 1;
+#X connect 1 0 4 1;
+#X connect 1 0 6 1;
+#X connect 1 0 0 0;
+#X connect 2 0 1 0;
+#X connect 3 0 1 0;
+#X connect 4 0 3 0;
+#X connect 5 0 4 0;
+#X connect 5 1 6 0;
+#X connect 6 0 3 1;
+#X connect 7 0 5 0;
+#X connect 7 1 2 0;
+#X connect 8 0 7 0;
+#X connect 9 0 7 0;
+#X connect 10 0 7 0;
+#X connect 11 0 7 0;
+#X connect 12 0 7 0;
+#X connect 13 0 7 0;
+#X connect 14 0 7 0;
+#X connect 15 0 7 0;
+#X connect 16 0 24 0;
+#X connect 17 0 25 0;
+#X connect 18 0 26 0;
+#X connect 19 0 27 0;
+#X connect 20 0 28 0;
+#X connect 21 0 29 0;
+#X connect 22 0 30 0;
+#X connect 23 0 31 0;
+#X connect 24 0 8 0;
+#X connect 25 0 9 0;
+#X connect 26 0 10 0;
+#X connect 27 0 11 0;
+#X connect 28 0 12 0;
+#X connect 29 0 13 0;
+#X connect 30 0 14 0;
+#X connect 31 0 15 0;
+#X restore 358 101 pd bytemask------------------;
+#X obj 358 251 outlet;
+#X connect 0 0 18 0;
+#X connect 1 0 18 1;
+#X connect 2 0 18 2;
+#X connect 3 0 18 3;
+#X connect 4 0 18 4;
+#X connect 5 0 18 5;
+#X connect 6 0 18 6;
+#X connect 7 0 18 7;
+#X connect 8 0 19 0;
+#X connect 9 0 19 1;
+#X connect 10 0 19 2;
+#X connect 11 0 19 3;
+#X connect 12 0 19 4;
+#X connect 13 0 19 5;
+#X connect 14 0 16 0;
+#X connect 14 1 17 0;
+#X connect 15 0 20 0;
+#X connect 16 0 15 0;
+#X connect 17 0 15 1;
+#X connect 18 0 16 0;
+#X connect 19 0 14 0;
+#X restore 24 145 pd send-to-arduino.................;
+#X obj 24 196 s \$0-arduino;
+#X floatatom 41 172 5 0 0 0 - - -;
+#X text 124 175 the pins are controlled with decimal numbers \, so
+you have to convert the binary toggle to a decimal number;
+#X text 20 32 NOTE: don't forget to set pins to output mode first!
+;
+#X connect 1 0 16 1;
+#X connect 2 0 16 2;
+#X connect 3 0 16 3;
+#X connect 4 0 16 4;
+#X connect 5 0 16 5;
+#X connect 6 0 16 6;
+#X connect 7 0 16 7;
+#X connect 8 0 16 8;
+#X connect 9 0 16 9;
+#X connect 10 0 16 10;
+#X connect 11 0 16 11;
+#X connect 12 0 16 12;
+#X connect 13 0 16 13;
+#X connect 14 0 13 0;
+#X connect 14 0 12 0;
+#X connect 14 0 11 0;
+#X connect 14 0 10 0;
+#X connect 14 0 9 0;
+#X connect 14 0 8 0;
+#X connect 14 0 7 0;
+#X connect 14 0 6 0;
+#X connect 14 0 5 0;
+#X connect 14 0 4 0;
+#X connect 14 0 3 0;
+#X connect 14 0 2 0;
+#X connect 14 0 1 0;
+#X connect 14 0 15 0;
+#X connect 15 0 16 0;
+#X connect 16 0 17 0;
+#X connect 16 0 18 0;
+#X restore 171 502 pd DIGITAL-OUTPUT;
+#N canvas 494 94 550 252 DIGITAL-INPUT 0;
+#X obj 46 128 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 2;
+#X obj 64 128 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 4;
+#X obj 82 128 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 8;
+#X obj 100 128 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 16
+;
+#X obj 119 128 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 32
+;
+#X obj 137 128 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 64
+;
+#X obj 156 128 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 128
+;
+#X obj 174 128 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 256
+;
+#X obj 194 128 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 512
+;
+#X obj 211 128 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1024
+;
+#X obj 230 128 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 2048
+;
+#X obj 248 128 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 4096
+;
+#X obj 267 128 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 8192
+;
+#X obj 28 128 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 1 1;
+#N canvas 64 160 778 300 send-to-arduino................. 0;
+#X obj 35 55 route digital;
+#X obj 35 229 outlet;
+#X obj 85 229 outlet;
+#X obj 137 229 outlet;
+#X obj 187 229 outlet;
+#X obj 237 229 outlet;
+#X obj 287 229 outlet;
+#X obj 339 229 outlet;
+#X obj 389 229 outlet;
+#X obj 437 229 outlet;
+#X obj 487 229 outlet;
+#X obj 539 229 outlet;
+#X obj 589 229 outlet;
+#X obj 637 229 outlet;
+#X obj 687 229 outlet;
+#X obj 35 25 inlet;
+#X text 289 82 bitmask to get the individual inputs;
+#X obj 665 171 & 8192;
+#X obj 613 169 & 4096;
+#X obj 553 169 & 2048;
+#X obj 35 169 & 1;
+#X obj 79 169 & 2;
+#X obj 125 171 & 4;
+#X obj 171 169 & 8;
+#X obj 217 169 & 16;
+#X obj 264 169 & 32;
+#X obj 313 169 & 64;
+#X obj 356 169 & 128;
+#X obj 403 169 & 256;
+#X obj 447 169 & 512;
+#X obj 495 169 & 1024;
 #X connect 0 0 17 0;
 #X connect 0 0 18 0;
 #X connect 0 0 19 0;
@@ -99,96 +336,169 @@
 #X connect 0 0 24 0;
 #X connect 0 0 25 0;
 #X connect 0 0 26 0;
+#X connect 0 0 27 0;
 #X connect 0 0 28 0;
-#X connect 1 0 4 0;
-#X connect 2 0 5 0;
-#X connect 3 0 6 0;
-#X connect 16 0 7 0;
-#X connect 17 0 8 0;
-#X connect 18 0 30 0;
-#X connect 19 0 9 0;
-#X connect 20 0 10 0;
-#X connect 21 0 29 0;
-#X connect 22 0 11 0;
-#X connect 23 0 12 0;
-#X connect 24 0 13 0;
-#X connect 25 0 14 0;
-#X connect 26 0 15 0;
-#X restore 473 507 pd decode buttons;
-#X obj 93 89 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6
-1 10 -225271 -1 -1 10100 0;
-#X msg 64 472 bang;
-#X text 461 47 7;
-#X text 355 47 0;
-#X text 502 47 10;
-#X obj 21 355 spigot 0;
-#X obj 64 326 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 1 1
+#X connect 0 0 29 0;
+#X connect 0 0 30 0;
+#X connect 15 0 0 0;
+#X connect 17 0 14 0;
+#X connect 18 0 13 0;
+#X connect 19 0 12 0;
+#X connect 20 0 1 0;
+#X connect 21 0 2 0;
+#X connect 22 0 3 0;
+#X connect 23 0 4 0;
+#X connect 24 0 5 0;
+#X connect 25 0 6 0;
+#X connect 26 0 7 0;
+#X connect 27 0 8 0;
+#X connect 28 0 9 0;
+#X connect 29 0 10 0;
+#X connect 30 0 11 0;
+#X restore 28 93 pd send-to-arduino.................;
+#X obj 28 69 r \$0-arduino-out;
+#X text 301 75 connect the Digital Input;
+#X text 301 92 to the ground (=0) or to;
+#X text 301 109 the positive voltage (=1);
+#X text 27 167 NOTE: if you don't connect your pin neither to + nor
+to the ground \, you will get random values (0 or 1) - to avoid that
+\, you could connect all the pins to the ground !;
+#X text 28 34 NOTE: don't forget to set pins to input mode first!;
+#X connect 14 0 13 0;
+#X connect 14 1 0 0;
+#X connect 14 2 1 0;
+#X connect 14 3 2 0;
+#X connect 14 4 3 0;
+#X connect 14 5 4 0;
+#X connect 14 6 5 0;
+#X connect 14 7 6 0;
+#X connect 14 8 7 0;
+#X connect 14 9 8 0;
+#X connect 14 10 9 0;
+#X connect 14 11 10 0;
+#X connect 14 12 11 0;
+#X connect 14 13 12 0;
+#X connect 15 0 14 0;
+#X restore 178 478 pd DIGITAL-INPUT;
+#X obj 402 155 s \$0-arduino-out;
+#X text 525 303 (0=input \, 1=output);
+#X obj 289 276 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 307 276 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 325 276 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 343 276 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 361 276 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 379 276 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 397 276 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 415 276 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 433 276 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 1 1;
+#X obj 451 276 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 1 1
 ;
-#X obj 21 377 route analog0 analog1 analog2 analog3 analog4 analog5
+#X obj 469 276 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 1 1
 ;
-#X obj 435 422 route digital;
-#X obj 521 442 print GARBAGE;
-#X floatatom 430 507 6 0 0 0 - - -;
-#X text 329 127 how many analogIns to enable:;
-#X obj 330 188 tgl 15 1 empty empty empty 0 -6 0 8 -257472 -1 -1 1
-1;
-#X text 353 187 enable/disable digitalIns;
-#X msg 330 206 digitalIns \$1;
-#X msg 330 164 analogIns 6;
-#N canvas 162 133 554 404 serin 0;
-#X obj 165 61 cnv 15 15 15 empty \$0-analog-number-canvas 6 4 8 0 14
--233017 -1 0;
-#X obj 60 61 hradio 15 1 1 7 empty empty empty 0 -6 0 8 -225280 -1
--1 6;
-#X obj 60 13 inlet;
-#X msg 200 202 label \$1;
-#X obj 200 180 makefilename %d;
-#X obj 59 108 int;
-#X obj 200 225 send \$0-analog-number-canvas;
-#X obj 59 337 outlet;
-#X obj 59 266 trigger bang anything;
-#X obj 118 302 cyclone/prepend set;
-#X msg 60 210 analogIns \$1;
-#X connect 1 0 5 0;
-#X connect 2 0 1 0;
-#X connect 3 0 6 0;
-#X connect 4 0 3 0;
-#X connect 5 0 4 0;
-#X connect 5 0 10 0;
-#X connect 8 0 7 0;
-#X connect 8 1 9 0;
-#X connect 9 0 7 0;
-#X connect 10 0 8 0;
-#X coords 0 -1 1 1 121 17 1 60 60;
-#X restore 330 144 pd serin;
-#X text 546 47 13;
-#X text 328 33 turn on output mode for each pin (off = input);
-#X obj 367 481 spigot;
-#X obj 400 463 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
+#X obj 487 276 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 1 1
+;
+#X obj 505 276 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 1 1
+;
+#X obj 531 256 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 1
 1;
-#X obj 367 502 print;
-#N canvas 0 22 269 256 speed 0;
-#X obj 21 41 inlet;
-#X obj 21 62 maxlib/speedlim 100;
-#X obj 21 84 outlet;
-#X obj 82 125 inlet;
-#X obj 82 146 maxlib/speedlim 100;
-#X obj 82 168 outlet;
-#X obj 92 135 inlet;
-#X obj 92 156 maxlib/speedlim 100;
-#X obj 92 178 outlet;
-#X obj 102 145 inlet;
-#X obj 102 166 maxlib/speedlim 100;
-#X obj 102 188 outlet;
-#X obj 112 155 inlet;
-#X obj 112 176 maxlib/speedlim 100;
-#X obj 112 198 outlet;
-#X obj 122 165 inlet;
-#X obj 122 186 maxlib/speedlim 100;
-#X obj 122 208 outlet;
-#X obj 132 175 inlet;
-#X obj 132 196 maxlib/speedlim 100;
-#X obj 132 218 outlet;
+#X text 530 241 all;
+#X obj 271 276 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 1 1;
+#N canvas 554 328 750 300 send-to-arduino---------------- 0;
+#X obj 49 54 inlet;
+#X obj 89 54 inlet;
+#X obj 128 54 inlet;
+#X obj 168 54 inlet;
+#X obj 208 54 inlet;
+#X obj 248 54 inlet;
+#X obj 287 54 inlet;
+#X obj 327 54 inlet;
+#X obj 368 53 inlet;
+#X obj 408 53 inlet;
+#X obj 447 53 inlet;
+#X obj 487 53 inlet;
+#X obj 527 53 inlet;
+#X msg 49 96 outputMode 0 \$1;
+#X msg 89 118 outputMode 1 \$1;
+#X msg 128 140 outputMode 2 \$1;
+#X msg 168 160 outputMode 3 \$1;
+#X msg 208 92 outputMode 4 \$1;
+#X msg 248 114 outputMode 5 \$1;
+#X msg 287 136 outputMode 6 \$1;
+#X msg 327 156 outputMode 7 \$1;
+#X msg 368 88 outputMode 8 \$1;
+#X msg 408 110 outputMode 9 \$1;
+#X msg 447 132 outputMode 10 \$1;
+#X msg 487 152 outputMode 11 \$1;
+#X msg 527 80 outputMode 12 \$1;
+#X obj 566 53 inlet;
+#X msg 566 100 outputMode 13 \$1;
+#X obj 305 226 outlet;
+#X connect 0 0 13 0;
+#X connect 1 0 14 0;
+#X connect 2 0 15 0;
+#X connect 3 0 16 0;
+#X connect 4 0 17 0;
+#X connect 5 0 18 0;
+#X connect 6 0 19 0;
+#X connect 7 0 20 0;
+#X connect 8 0 21 0;
+#X connect 9 0 22 0;
+#X connect 10 0 23 0;
+#X connect 11 0 24 0;
+#X connect 12 0 25 0;
+#X connect 13 0 28 0;
+#X connect 14 0 28 0;
+#X connect 15 0 28 0;
+#X connect 16 0 28 0;
+#X connect 17 0 28 0;
+#X connect 18 0 28 0;
+#X connect 19 0 28 0;
+#X connect 20 0 28 0;
+#X connect 21 0 28 0;
+#X connect 22 0 28 0;
+#X connect 23 0 28 0;
+#X connect 24 0 28 0;
+#X connect 25 0 28 0;
+#X connect 26 0 27 0;
+#X connect 27 0 28 0;
+#X restore 271 303 pd send-to-arduino----------------;
+#X obj 271 356 s \$0-arduino;
+#X msg 294 329 outputMode 13 1;
+#X text 412 329 set pin 13 to output mode;
+#X text 270 223 Set input/output mode of the pins for digital IO:;
+#N canvas 374 455 492 344 ANALOG-INPUT 0;
+#X obj 29 59 r \$0-arduino-out;
+#X obj 29 97 spigot 0;
+#X obj 91 94 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1
+;
+#X obj 29 139 route analog0 analog1 analog2 analog3 analog4 analog5
+;
+#X floatatom 29 220 5 0 0 3 analog0 - -;
+#X floatatom 102 219 5 0 0 3 analog1 - -;
+#X floatatom 175 219 5 0 0 3 analog2 - -;
+#X floatatom 248 220 5 0 0 3 analog3 - -;
+#X floatatom 321 220 5 0 0 3 analog4 - -;
+#X floatatom 395 221 5 0 0 3 analog5 - -;
+#N canvas 400 102 662 136 speed-limiting-to-save-cpu------------------------
+0;
+#X obj 19 31 inlet;
+#X obj 19 55 speedlim 100;
+#X obj 19 79 outlet;
+#X obj 119 31 inlet;
+#X obj 119 55 speedlim 100;
+#X obj 119 79 outlet;
+#X obj 219 31 inlet;
+#X obj 219 55 speedlim 100;
+#X obj 219 79 outlet;
+#X obj 319 31 inlet;
+#X obj 319 55 speedlim 100;
+#X obj 319 79 outlet;
+#X obj 419 31 inlet;
+#X obj 419 55 speedlim 100;
+#X obj 419 79 outlet;
+#X obj 519 31 inlet;
+#X obj 519 55 speedlim 100;
+#X obj 519 79 outlet;
 #X connect 0 0 1 0;
 #X connect 1 0 2 0;
 #X connect 3 0 4 0;
@@ -201,248 +511,112 @@
 #X connect 13 0 14 0;
 #X connect 15 0 16 0;
 #X connect 16 0 17 0;
-#X connect 18 0 19 0;
-#X connect 19 0 20 0;
-#X restore 21 399 pd speed limiting for displaying values with pegging
-the CPU;
-#N canvas 77 268 462 312 debugging 0;
-#X obj 136 31 inlet;
-#X obj 324 29 inlet;
-#X obj 27 31 inlet;
-#X obj 162 81 spigot;
-#X obj 159 106 select 255;
-#X obj 184 246 print;
-#X obj 184 227 list;
-#X obj 43 115 spigot;
-#X obj 210 201 bang;
-#X obj 181 138 mapping/tolist;
-#X obj 208 181 change;
-#X obj 208 159 list-abs/list-len;
-#X obj 43 136 print DEBUG;
-#X connect 0 0 7 1;
-#X connect 1 0 3 1;
-#X connect 2 0 7 0;
-#X connect 2 0 3 0;
-#X connect 3 0 4 0;
-#X connect 4 0 9 1;
-#X connect 4 1 9 0;
-#X connect 6 0 5 0;
-#X connect 7 0 12 0;
-#X connect 8 0 6 0;
-#X connect 9 0 6 1;
-#X connect 9 0 11 0;
-#X connect 10 0 8 0;
-#X connect 11 0 10 0;
-#X restore 313 339 pd debugging stuff;
-#X text 351 235 use raw data to save settings more compactly;
-#X floatatom 21 424 5 0 0 3 analog0 - -;
-#X floatatom 90 424 5 0 0 3 analog1 - -;
-#X floatatom 159 424 5 0 0 3 analog2 - -;
-#X floatatom 228 424 5 0 0 3 analog3 - -;
-#X floatatom 297 424 5 0 0 3 analog4 - -;
-#X floatatom 366 424 5 0 0 3 analog5 - -;
-#X text 415 47 4;
-#X text 384 47 2;
-#X text 429 47 5;
-#X text 444 47 6;
-#X text 400 47 3;
-#X msg 330 103 outputMode 13 1;
-#N canvas 304 39 550 373 sending 0;
-#X obj 167 325 outlet;
-#X obj 49 64 tgl 15 0 empty empty 0 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 66 64 tgl 15 0 empty empty 1 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 83 64 tgl 15 0 empty empty 2 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 100 64 tgl 15 0 empty empty 3 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 117 64 tgl 15 0 empty empty 4 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 134 64 tgl 15 0 empty empty 5 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 151 64 tgl 15 0 empty empty 6 4 -6 1 12 -233017 -1 -1 0 1;
-#X text 60 11 The 8th bit is not used in the bitmask \, there are 7
-bits of digital output values per byte.;
-#X obj 168 64 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 185 64 tgl 15 0 empty empty 8 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 202 64 tgl 15 0 empty empty 9 4 -6 1 12 -233017 -1 -1 0 1;
-#X obj 219 64 tgl 15 0 empty empty 10 0 -6 1 12 -233017 -1 -1 0 1;
-#X obj 236 64 tgl 15 0 empty empty 11 0 -6 1 12 -233017 -1 -1 0 1;
-#X obj 253 64 tgl 15 0 empty empty 12 0 -6 1 12 -233017 -1 -1 0 1;
-#X obj 270 64 tgl 15 0 empty empty 13 0 -6 1 12 -233017 -1 -1 0 1;
-#X obj 167 140 trigger bang float;
-#X obj 167 105 mapping/bytemask;
-#X obj 48 105 mapping/bytemask;
-#X obj 380 175 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 16383
-16383;
-#X obj 380 138 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
-16383;
-#X obj 379 156 metro 100;
-#X obj 167 200 +;
-#X obj 167 163 float;
-#X obj 288 161 << 7;
-#X text 251 205 this will flash all pins set to output;
-#X obj 380 45 inlet;
-#X connect 1 0 18 0;
-#X connect 2 0 18 1;
-#X connect 3 0 18 2;
-#X connect 4 0 18 3;
-#X connect 5 0 18 4;
-#X connect 6 0 18 5;
-#X connect 7 0 18 6;
-#X connect 9 0 17 0;
-#X connect 10 0 17 1;
-#X connect 11 0 17 2;
-#X connect 12 0 17 3;
-#X connect 13 0 17 4;
-#X connect 14 0 17 5;
-#X connect 15 0 17 6;
-#X connect 16 0 23 0;
-#X connect 16 1 24 0;
-#X connect 17 0 16 0;
-#X connect 18 0 23 0;
-#X connect 19 0 0 0;
-#X connect 20 0 21 0;
-#X connect 21 0 19 0;
-#X connect 22 0 0 0;
-#X connect 23 0 22 0;
-#X connect 24 0 22 1;
-#X connect 26 0 20 0;
-#X restore 20 249 pd sending digital outs;
-#X msg 398 251 251 \, 9 \, 20 \, 142 \, 213;
-#X text 325 292 <- argument sets port #;
-#X msg 57 89 off;
-#X text 475 47 8;
-#X text 492 47 9;
-#X text 516 47 11;
-#X text 531 47 12;
-#X text 370 47 1;
-#X obj 35 61 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -176124 -1
--1 13;
-#X text 143 47 7;
-#X text 37 47 0;
-#X text 184 47 10;
-#X text 230 47 13;
-#X text 97 47 4;
-#X text 66 47 2;
-#X text 111 47 5;
-#X text 126 47 6;
-#X text 82 47 3;
-#X text 157 47 8;
-#X text 174 47 9;
-#X text 200 47 11;
-#X text 215 47 12;
-#X text 52 47 1;
-#N canvas 66 58 407 487 pwm 0;
-#X obj 38 10 inlet;
-#X obj 131 10 inlet;
-#X obj 38 443 outlet;
-#X msg 37 308 pwm \$1 \$2;
-#X obj 38 259 pack float float;
-#X obj 192 113 route float symbol;
-#X obj 188 259 pack float symbol;
-#X text 78 11 pin#;
-#X text 179 10 PWM value or "off";
-#X obj 39 217 cyclone/gate 2;
-#X msg 191 153 1;
-#X msg 252 153 2;
-#X obj 131 34 list;
-#X obj 131 113 float;
-#X obj 131 67 trigger bang anything;
-#X obj 179 372 cyclone/prepend set;
-#X obj 37 346 trigger bang anything;
-#X connect 0 0 13 0;
-#X connect 1 0 12 0;
-#X connect 3 0 16 0;
-#X connect 4 0 3 0;
-#X connect 5 0 10 0;
-#X connect 5 0 4 1;
-#X connect 5 1 11 0;
-#X connect 5 1 6 1;
-#X connect 6 0 3 0;
-#X connect 9 0 4 0;
-#X connect 9 1 6 0;
-#X connect 10 0 9 0;
-#X connect 11 0 9 0;
-#X connect 12 0 14 0;
-#X connect 13 0 9 1;
-#X connect 14 0 13 0;
-#X connect 14 1 5 0;
-#X connect 15 0 2 0;
-#X connect 16 0 2 0;
-#X connect 16 1 15 0;
-#X restore 36 115 pd pwm;
-#X msg 36 135 pwm 13 0.677852;
-#N canvas 45 415 395 319 pin 0;
-#X obj 42 19 inlet;
-#X obj 218 20 inlet;
-#X obj 64 154 pack float float;
-#X obj 218 92 trigger bang float;
-#X text 82 19 input(0)/output(1);
-#X msg 64 180 outputMode \$2 \$1;
-#X obj 64 280 outlet;
-#X obj 206 231 cyclone/prepend set;
-#X obj 64 205 trigger bang anything;
-#X connect 0 0 2 0;
-#X connect 1 0 3 0;
-#X connect 2 0 5 0;
-#X connect 3 0 2 0;
-#X connect 3 1 2 1;
-#X connect 5 0 8 0;
-#X connect 7 0 6 0;
-#X connect 8 0 6 0;
-#X connect 8 1 7 0;
-#X restore 330 82 pd pin mode;
-#X obj 255 293 arduino 1;
-#X text 17 7 The [arduino] object works with the Firmata firmware for
-Arduino.;
-#X msg 195 196 info;
-#X obj 488 333 key;
-#X obj 489 356 select 32;
-#X obj 20 230 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 16383
+#X restore 29 173 pd speed-limiting-to-save-cpu------------------------
 ;
-#X text 38 229 pulse all outputs;
-#X connect 0 0 76 0;
-#X connect 1 0 0 0;
-#X connect 5 0 76 0;
-#X connect 7 0 35 2;
-#X connect 8 0 75 1;
-#X connect 9 0 75 0;
-#X connect 10 0 35 1;
-#X connect 12 0 73 1;
-#X connect 13 0 6 0;
-#X connect 17 0 19 0;
-#X connect 18 0 17 1;
-#X connect 19 0 34 0;
-#X connect 19 1 34 1;
-#X connect 19 2 34 2;
-#X connect 19 3 34 3;
-#X connect 19 4 34 4;
-#X connect 19 5 34 5;
-#X connect 19 6 34 6;
-#X connect 20 0 11 0;
-#X connect 20 0 22 0;
-#X connect 20 0 31 0;
-#X connect 20 1 21 0;
-#X connect 24 0 26 0;
-#X connect 26 0 76 0;
-#X connect 27 0 76 0;
+#X text 30 24 Analog Inputs of the Arduino-Board:;
+#X text 119 96 <- enable analog inputs;
+#X text 25 283 NOTE: connect the analog pins that you don't use to
+the ground \, if you want to avoid flickering of the values !;
+#X connect 0 0 1 0;
+#X connect 1 0 3 0;
+#X connect 2 0 1 1;
+#X connect 3 0 10 0;
+#X connect 3 1 10 1;
+#X connect 3 2 10 2;
+#X connect 3 3 10 3;
+#X connect 3 4 10 4;
+#X connect 3 5 10 5;
+#X connect 10 0 4 0;
+#X connect 10 1 5 0;
+#X connect 10 2 6 0;
+#X connect 10 3 7 0;
+#X connect 10 4 8 0;
+#X connect 10 5 9 0;
+#X restore 185 526 pd ANALOG-INPUT;
+#N canvas 729 582 542 358 ANALOG-OUTPUT-PWM 0;
+#X text 16 17 Analog Output \, PWM (Pulse Width Modulation);
+#X text 16 53 With the help of PWM you can write analog values to the
+pins 9 \, 10 \, 11 of your Arduino board.;
+#X text 17 89 NOTE: don't forget to set the pins to output mode first
+!;
+#X msg 21 189 pwm 9 \$1;
+#X obj 24 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6
+1 10 -260818 -1 -1 6800 1;
+#X msg 31 234 pwm 9 off;
+#X obj 21 258 s \$0-arduino;
+#X text 29 215 disable PWM:;
+#X obj 192 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
+-6 1 10 -260818 -1 -1 8200 1;
+#X obj 189 258 s \$0-arduino;
+#X text 197 215 disable PWM:;
+#X obj 354 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
+-6 1 10 -260818 -1 -1 6400 1;
+#X obj 351 258 s \$0-arduino;
+#X text 359 215 disable PWM:;
+#X text 21 133 PIN9:;
+#X text 189 135 PIN10:;
+#X text 351 135 PIN11:;
+#X msg 189 189 pwm 10 \$1;
+#X msg 199 234 pwm 10 off;
+#X msg 351 189 pwm 11 \$1;
+#X msg 361 234 pwm 11 off;
+#X text 21 319 NOTE: it is possible to write as well on the other pins
+to send software-PWM signals (will come soon ...);
+#X connect 3 0 6 0;
+#X connect 4 0 3 0;
+#X connect 5 0 6 0;
+#X connect 8 0 17 0;
+#X connect 11 0 19 0;
+#X connect 17 0 9 0;
+#X connect 18 0 9 0;
+#X connect 19 0 12 0;
+#X connect 20 0 12 0;
+#X restore 150 551 pd ANALOG-OUTPUT-PWM;
+#X text 25 421 With the Arduino-Board you can do digital and analog
+input and output \, as descriped in the following sub-patches:;
+#X text 301 501 <- example of Digital Output;
+#X text 301 479 <- example of Digital Input;
+#X text 301 527 <- example of Analog Input;
+#X text 301 552 <- example of Analog Output;
+#X text 259 54 Arduino Interface For PD;
+#X text 286 28 ::::_PDUINO_::::;
+#X text 475 595 2006 \, released under GNU GPL \; Gerda Strobl \, Georg
+Holzmann;
+#X text 86 305 <- list devices;
+#X connect 2 0 13 0;
+#X connect 3 0 4 0;
+#X connect 3 0 5 0;
+#X connect 4 0 10 0;
+#X connect 6 0 2 0;
+#X connect 7 0 10 0;
+#X connect 8 0 10 0;
+#X connect 15 0 31 1;
+#X connect 16 0 31 2;
+#X connect 17 0 31 3;
+#X connect 18 0 31 4;
+#X connect 19 0 31 5;
+#X connect 20 0 31 6;
+#X connect 21 0 31 7;
+#X connect 22 0 31 8;
+#X connect 23 0 31 9;
+#X connect 24 0 31 10;
+#X connect 25 0 31 11;
+#X connect 26 0 31 12;
+#X connect 27 0 31 13;
 #X connect 28 0 27 0;
-#X connect 31 0 33 0;
-#X connect 32 0 31 1;
-#X connect 34 0 37 0;
-#X connect 34 1 38 0;
-#X connect 34 2 39 0;
-#X connect 34 3 40 0;
-#X connect 34 4 41 0;
-#X connect 34 5 42 0;
-#X connect 34 6 20 0;
-#X connect 48 0 76 0;
-#X connect 49 0 76 0;
-#X connect 50 0 76 1;
-#X connect 52 0 73 1;
-#X connect 58 0 73 0;
-#X connect 73 0 74 0;
-#X connect 74 0 76 0;
-#X connect 75 0 48 0;
-#X connect 76 0 17 0;
-#X connect 76 1 35 0;
-#X connect 78 0 76 0;
-#X connect 79 0 80 0;
-#X connect 80 0 10 0;
-#X connect 81 0 49 0;
+#X connect 28 0 26 0;
+#X connect 28 0 25 0;
+#X connect 28 0 24 0;
+#X connect 28 0 23 0;
+#X connect 28 0 22 0;
+#X connect 28 0 21 0;
+#X connect 28 0 20 0;
+#X connect 28 0 19 0;
+#X connect 28 0 18 0;
+#X connect 28 0 17 0;
+#X connect 28 0 16 0;
+#X connect 28 0 15 0;
+#X connect 28 0 30 0;
+#X connect 30 0 31 0;
+#X connect 31 0 32 0;
+#X connect 33 0 32 0;