diff options
| -rw-r--r-- | examples/PD_all_inputs.pd | 95 | ||||
| -rw-r--r-- | examples/PD_inputs_to_PD.pd | 18 | ||||
| -rw-r--r-- | examples/PD_send_potentiometer.pd | 36 | ||||
| -rw-r--r-- | examples/PD_two_potentiometers.pd | 80 | ||||
| -rw-r--r-- | examples/Pd_Input/Pd_Input.pde | 33 |
5 files changed, 235 insertions, 27 deletions
diff --git a/examples/PD_all_inputs.pd b/examples/PD_all_inputs.pd new file mode 100644 index 0000000..8f78216 --- /dev/null +++ b/examples/PD_all_inputs.pd @@ -0,0 +1,95 @@ +#N canvas 159 48 492 617 10; +#X obj 346 18 import zexy; +#X text 112 148 On Mac OS X \, set this to the right value:; +#X text 5 38 You might need to select another port \, check the Pd +window to see if it connected successfully:; +#X msg 136 120 close; +#X msg 116 165 devicename /dev/tty.usbserial-191; +#X obj 11 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC0 5 30 1 10 +-3754 -1 -1 508 256; +#N canvas 162 133 518 368 serin 0; +#X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 +-1 0; +#X obj 241 251 s \$0-number-canvas; +#X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 +-1 0; +#X obj 101 134 + 1; +#X obj 100 173 outlet; +#X obj 101 39 inlet; +#X msg 241 228 label \$1; +#X obj 241 206 makefilename %d; +#X connect 2 0 3 0; +#X connect 3 0 4 0; +#X connect 3 0 7 0; +#X connect 5 0 2 0; +#X connect 6 0 1 0; +#X connect 7 0 6 0; +#X coords 0 -1 1 1 76 17 1 100 100; +#X restore 77 71 pd serin; +#X msg 77 119 open \$1; +#X text 4 -3 This patch works with the example Arduino firmware of +the same name.; +#X text 9 552 CAUTION! Watch out if you connect your potentiometer +without an extra resistor \, when you turn it all the way up \, the +full voltage and current will go to the input. This could fry your +board!; +#X obj 79 357 +; +#X obj 78 259 trigger float bang; +#X obj 95 318 float; +#X obj 95 337 * 10; +#X obj 176 345 float; +#X msg 196 290 0; +#X text 250 459 ASCII for A B C D E F; +#X obj 77 235 - 48; +#X obj 79 460 route 65 66 67 68 69 70; +#X obj 79 378 trigger bang float; +#X obj 79 417 float; +#X obj 247 386 float; +#X obj 79 440 pack float float; +#X obj 61 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC1 5 30 1 10 +-3754 -1 -1 0 256; +#X obj 111 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC2 5 30 1 10 +-3754 -1 -1 10 256; +#X obj 161 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC3 5 30 1 10 +-3754 -1 -1 98 256; +#X obj 211 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC4 5 30 1 10 +-3754 -1 -1 158 256; +#X obj 261 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC5 5 30 1 10 +-3754 -1 -1 623 256; +#X obj 320 511 print ERRANT_VALUE; +#X obj 247 250 float; +#X obj 77 211 moses 58; +#X text 84 88 (sometimes it takes up to 10 seconds to close the serial +port \, if things are running fast); +#X text 181 121 <-- close before uploading a new firmware!; +#X obj 77 188 comport 1 19200; +#X connect 3 0 33 0; +#X connect 4 0 33 0; +#X connect 6 0 7 0; +#X connect 7 0 33 0; +#X connect 10 0 14 0; +#X connect 10 0 19 0; +#X connect 11 0 10 0; +#X connect 11 1 12 0; +#X connect 12 0 13 0; +#X connect 13 0 10 1; +#X connect 14 0 12 1; +#X connect 15 0 12 1; +#X connect 17 0 11 0; +#X connect 18 0 5 0; +#X connect 18 1 23 0; +#X connect 18 2 24 0; +#X connect 18 3 25 0; +#X connect 18 4 26 0; +#X connect 18 5 27 0; +#X connect 18 6 28 0; +#X connect 19 0 20 0; +#X connect 19 1 22 1; +#X connect 20 0 22 0; +#X connect 21 0 20 1; +#X connect 22 0 18 0; +#X connect 29 0 15 0; +#X connect 29 0 21 0; +#X connect 30 0 17 0; +#X connect 30 1 29 0; +#X connect 33 0 30 0; diff --git a/examples/PD_inputs_to_PD.pd b/examples/PD_inputs_to_PD.pd index 5fd0be8..14a0c33 100644 --- a/examples/PD_inputs_to_PD.pd +++ b/examples/PD_inputs_to_PD.pd @@ -1,4 +1,4 @@ -#N canvas 583 37 658 481 10; +#N canvas 583 37 662 485 10; #X obj 29 56 r pushButton2; #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; @@ -26,7 +26,6 @@ #X obj 369 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; #X obj 369 109 r potentioMeter2; -#X msg 246 316 devicename /dev/tty.usbserial-181; #X text 242 298 On Mac OS X \, set this to the right value:; #X msg 192 255 open \$1; #X obj 192 358 comport 1 9600; @@ -65,6 +64,7 @@ the same name.; #X coords 0 -1 1 1 76 17 1 100 100; #X restore 192 232 pd serin; #X text 273 233 serial port #; +#X msg 246 316 devicename /dev/tty.usbserial-191; #X connect 0 0 1 0; #X connect 2 0 3 0; #X connect 4 0 5 0; @@ -74,10 +74,10 @@ the same name.; #X connect 13 0 12 0; #X connect 15 0 14 0; #X connect 17 0 16 0; -#X connect 18 0 21 0; -#X connect 20 0 21 0; -#X connect 21 0 29 0; -#X connect 28 0 21 0; -#X connect 29 0 32 0; -#X connect 29 1 31 0; -#X connect 34 0 20 0; +#X connect 19 0 20 0; +#X connect 20 0 28 0; +#X connect 27 0 20 0; +#X connect 28 0 31 0; +#X connect 28 1 30 0; +#X connect 33 0 19 0; +#X connect 35 0 20 0; diff --git a/examples/PD_send_potentiometer.pd b/examples/PD_send_potentiometer.pd index bde76f5..c869645 100644 --- a/examples/PD_send_potentiometer.pd +++ b/examples/PD_send_potentiometer.pd @@ -1,16 +1,12 @@ -#N canvas 66 362 494 354 10; -#X text 153 122 On Mac OS X \, set this to the right value:; -#X obj 103 182 comport 1 9600; -#X text 30 11 You might need to select another port \, check the Pd +#N canvas 66 362 498 358 10; +#X text 151 136 On Mac OS X \, set this to the right value:; +#X obj 101 196 comport 1 9600; +#X text 28 25 You might need to select another port \, check the Pd window to see if it connected successfully:; -#X msg 163 87 close; -#X msg 157 139 devicename /dev/tty.usbserial-191; -#X obj 102 215 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 --3754 -1 -1 79 256; -#X text 36 252 CAUTION! Watch out if you connect your potentiometer -without an extra resistor \, when you turn it all the way up \, the -full voltage and currrent will go to the input. This could kill your -board!; +#X msg 161 101 close; +#X msg 155 153 devicename /dev/tty.usbserial-191; +#X obj 100 229 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 +-3754 -1 -1 13 256; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; @@ -29,13 +25,17 @@ board!; #X connect 6 0 1 0; #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; -#X restore 103 61 pd serin; -#X msg 103 86 open \$1; -#X text 184 62 serial port #; -#X text 30 -20 This patch works with the example Arduino firmware of +#X restore 101 75 pd serin; +#X msg 101 100 open \$1; +#X text 182 76 serial port #; +#X text 28 -6 This patch works with the example Arduino firmware of the same name.; +#X text 34 266 CAUTION! Watch out if you connect your potentiometer +without an extra resistor \, when you turn it all the way up \, the +full voltage and current will go to the input. This could kill your +board!; #X connect 1 0 5 0; #X connect 3 0 1 0; #X connect 4 0 1 0; -#X connect 7 0 8 0; -#X connect 8 0 1 0; +#X connect 6 0 7 0; +#X connect 7 0 1 0; diff --git a/examples/PD_two_potentiometers.pd b/examples/PD_two_potentiometers.pd new file mode 100644 index 0000000..9f56583 --- /dev/null +++ b/examples/PD_two_potentiometers.pd @@ -0,0 +1,80 @@ +#N canvas 327 35 530 629 10; +#X obj 420 2 import zexy; +#X text 127 139 On Mac OS X \, set this to the right value:; +#X obj 77 195 comport 1 9600; +#X text 5 42 You might need to select another port \, check the Pd +window to see if it connected successfully:; +#X msg 137 104 close; +#X msg 131 156 devicename /dev/tty.usbserial-191; +#X obj 111 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_0 -15 +30 1 14 -3754 -1 -1 0 256; +#N canvas 162 133 518 368 serin 0; +#X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 +-1 0; +#X obj 241 251 s \$0-number-canvas; +#X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 +-1 0; +#X obj 101 134 + 1; +#X obj 100 173 outlet; +#X obj 101 39 inlet; +#X msg 241 228 label \$1; +#X obj 241 206 makefilename %d; +#X connect 2 0 3 0; +#X connect 3 0 4 0; +#X connect 3 0 7 0; +#X connect 5 0 2 0; +#X connect 6 0 1 0; +#X connect 7 0 6 0; +#X coords 0 -1 1 1 76 17 1 100 100; +#X restore 77 78 pd serin; +#X msg 77 103 open \$1; +#X text 158 79 serial port #; +#X text 4 -3 This patch works with the example Arduino firmware of +the same name.; +#X text 6 550 CAUTION! Watch out if you connect your potentiometer +without an extra resistor \, when you turn it all the way up \, the +full voltage and current will go to the input. This could fry your +board!; +#X obj 156 246 makefilename %c; +#X obj 77 225 select 13 10; +#X text 266 246 <-- convert integer to ASCII; +#X obj 223 424 +; +#X obj 193 470 float; +#X obj 221 315 trigger float bang; +#X obj 239 385 float; +#X obj 239 404 * 10; +#X obj 221 289 symbol2list; +#X obj 320 412 float; +#X msg 164 337 0; +#X obj 150 470 float; +#X text 197 339 <-- reset for the next pot reading; +#X text 303 285 <-- converts the ASCII digit; +#X text 332 297 symbol to a float; +#X text 169 225 <-- filter out newline characters; +#X obj 156 267 select B A; +#X obj 209 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_1 -15 +30 1 14 -3754 -1 -1 0 256; +#X connect 2 0 13 0; +#X connect 4 0 2 0; +#X connect 5 0 2 0; +#X connect 7 0 8 0; +#X connect 8 0 2 0; +#X connect 12 0 28 0; +#X connect 13 2 12 0; +#X connect 15 0 16 1; +#X connect 15 0 21 0; +#X connect 15 0 23 1; +#X connect 16 0 29 0; +#X connect 17 0 15 0; +#X connect 17 1 18 0; +#X connect 18 0 19 0; +#X connect 19 0 15 1; +#X connect 20 0 17 0; +#X connect 21 0 18 1; +#X connect 22 0 18 1; +#X connect 23 0 6 0; +#X connect 28 0 22 0; +#X connect 28 0 23 0; +#X connect 28 1 22 0; +#X connect 28 1 16 0; +#X connect 28 2 20 0; diff --git a/examples/Pd_Input/Pd_Input.pde b/examples/Pd_Input/Pd_Input.pde new file mode 100644 index 0000000..d5dd5e7 --- /dev/null +++ b/examples/Pd_Input/Pd_Input.pde @@ -0,0 +1,33 @@ +/* Pd_Input + * ------------------ + * + * This program reads all of the Analog inputs + * and sends the data to the computer as fast as + * possible. It was designed to work with the Pd + * patch of the same name in: + * Help -> Browser -> examples -> hardware + * + * (cleft) 2006 Hans-Christoph Steiner + * @author: Hans-Christoph Steiner + * @date: 2006-03-04 + * @location: Polytechnic University, Brooklyn, New York, USA + */ + +/* + * CAUTION!! Do not turn on the Serial Monitor, it could freeze + * your computer with this firmware running! It outputs data + * without a delay() so its very fast. + */ + +int potPin = 0; +void setup() { + beginSerial(19200); +} + +void loop() { + printByte(potPin + 65); // add 65 to get ASCII chars starting with A + printInteger(analogRead(potPin)); + potPin = potPin + 1; + if (potPin > 5) + potPin = 0; +} |