diff options
| -rw-r--r-- | Pd_firmware/Pd_firmware.pde | 16 | ||||
| -rw-r--r-- | arduino-test.pd | 452 | ||||
| -rw-r--r-- | arduino.pd | 58 |
3 files changed, 493 insertions, 33 deletions
diff --git a/Pd_firmware/Pd_firmware.pde b/Pd_firmware/Pd_firmware.pde index b76f749..1d64867 100644 --- a/Pd_firmware/Pd_firmware.pde +++ b/Pd_firmware/Pd_firmware.pde @@ -36,7 +36,8 @@ /* * TODO: get digitalInput working - * TODO: add pulseIn functionality + * TODO: add pulseIn/pulseOut functionality + * TODO: save settings to EEPROM * TODO: add software PWM for servos, etc (servo.h or pulse.h) * TODO: redesign protocol to accomodate boards with more I/Os * TODO: add cycle markers to mark start of analog, digital, pulseIn, and PWM @@ -112,7 +113,7 @@ /* two byte PWM data format * ---------------------- - * 0 get ready for digital input bytes (ENABLE_SOFTWARE_PWM/ENABLE_PWM) + * 0 get ready for digital input bytes (ENABLE_PWM) * 1 pin # * 2 duty cycle expressed as 1 byte (255 = 100%) */ @@ -217,18 +218,12 @@ void setPinMode(int pin, int mode) { pwmStatus = pwmStatus &~ (1 << pin); pinMode(pin,OUTPUT); } + // this will apply to all digital pins once softPWM is implemented else if( (mode == PWM) && (pin >= 9) && (pin <= 11) ) { digitalPinStatus = digitalPinStatus | (1 << pin); pwmStatus = pwmStatus | (1 << pin); - softPwmStatus = softPwmStatus &~ (1 << pin); pinMode(pin,OUTPUT); } - else if(mode == SOFTPWM) { - digitalPinStatus = digitalPinStatus | (1 << pin); - pwmStatus = pwmStatus &~ (1 << pin); - softPwmStatus = softPwmStatus | (1 << pin); - pinMode(pin,OUTPUT); - } } void setSoftPwm (int pin, byte pulsePeriod) { @@ -293,7 +288,7 @@ void processInput(byte inputData) { case DISABLE_PWM: setPinMode(storedInputData[0],INPUT); break; - case ENABLE_SOFTWARE_PWM: +/* case ENABLE_SOFTWARE_PWM: setPinMode(storedInputData[1],SOFTPWM); setSoftPwm(storedInputData[1], storedInputData[0]); break; @@ -303,6 +298,7 @@ void processInput(byte inputData) { case SET_SOFTWARE_PWM_FREQ: setSoftPwmFreq(storedInputData[0]); break; + */ } executeMultiByteCommand = 0; } diff --git a/arduino-test.pd b/arduino-test.pd new file mode 100644 index 0000000..124311c --- /dev/null +++ b/arduino-test.pd @@ -0,0 +1,452 @@ +#N canvas 264 99 695 570 10; +#X msg 166 173 open 3; +#N canvas 627 365 360 384 serin 0; +#X obj 180 61 cnv 15 15 15 empty \$0-number-canvas 3 4 8 0 14 -233017 +-1 0; +#X obj 200 225 s \$0-number-canvas; +#X obj 60 61 hradio 15 1 1 8 empty empty empty 0 -6 0 8 -225271 -1 +-1 3; +#X obj 60 13 inlet; +#X msg 200 202 label \$1; +#X obj 200 180 makefilename %d; +#X obj 59 108 int; +#X msg 59 206 open \$1; +#X obj 59 337 outlet; +#X msg 201 306 set \$1 \$2; +#X obj 59 266 trigger bang anything; +#X obj 201 286 list; +#X connect 2 0 6 0; +#X connect 3 0 2 0; +#X connect 4 0 1 0; +#X connect 5 0 4 0; +#X connect 6 0 5 0; +#X connect 6 0 7 0; +#X connect 7 0 10 0; +#X connect 9 0 8 0; +#X connect 10 0 8 0; +#X connect 10 1 11 0; +#X connect 11 0 9 0; +#X coords 0 -1 1 1 136 17 1 60 60; +#X restore 166 150 pd serin; +#X text 163 132 serial port #; +#X text 424 528 released under the GNU GPL; +#X text 7 526 (C) Copyright 2006 Hans-Christoph Steiner <hans@at.or.at> +; +#X msg 226 173 close; +#X obj 63 497 print --------------------; +#X obj 434 321 tgl 15 0 empty empty changes 0 -6 0 8 -262144 -1 -1 +0 1; +#X obj 353 61 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -262131 -1 +-1 13; +#X obj 330 62 tgl 15 0 empty empty empty 0 -6 0 8 -262131 -1 -1 0 1 +; +#X obj 373 321 tgl 15 0 empty empty all 0 -6 0 8 -262144 -1 -1 0 1 +; +#N canvas 514 440 628 350 decode 0; +#X obj 241 26 inlet; +#X obj 545 189 & 1; +#X obj 511 189 & 2; +#X obj 477 189 & 4; +#X obj 545 213 tgl 15 0 empty empty 0 4 25 1 12 -262144 -1 -1 0 1; +#X obj 511 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +2; +#X obj 477 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +4; +#X obj 433 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +8; +#X obj 389 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +16; +#X obj 314 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +64; +#X obj 277 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +128; +#X obj 195 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +512; +#X obj 151 213 tgl 15 0 empty empty 10 -1 25 1 12 -262144 -1 -1 0 1024 +; +#X obj 107 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +2048; +#X obj 63 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 4096 +; +#X obj 19 213 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 8192 +; +#X obj 433 189 & 8; +#X obj 389 189 & 16; +#X obj 351 189 & 32; +#X obj 314 189 & 64; +#X obj 277 189 & 128; +#X obj 236 189 & 256; +#X obj 195 189 & 512; +#X obj 151 189 & 1024; +#X obj 107 189 & 2048; +#X obj 63 189 & 4096; +#X obj 19 189 & 8192; +#X obj 261 273 outlet; +#X floatatom 296 46 5 0 0 0 - - -; +#X obj 236 213 tgl 15 0 empty empty 8 -1 25 1 12 -262144 -1 -1 0 256 +; +#X obj 351 213 tgl 15 0 empty empty 5 -1 25 1 12 -262144 -1 -1 0 32 +; +#X connect 0 0 1 0; +#X connect 0 0 2 0; +#X connect 0 0 3 0; +#X connect 0 0 16 0; +#X connect 0 0 17 0; +#X connect 0 0 18 0; +#X connect 0 0 19 0; +#X connect 0 0 20 0; +#X connect 0 0 21 0; +#X connect 0 0 22 0; +#X connect 0 0 23 0; +#X connect 0 0 24 0; +#X connect 0 0 25 0; +#X connect 0 0 26 0; +#X connect 0 0 28 0; +#X connect 1 0 4 0; +#X connect 2 0 5 0; +#X connect 3 0 6 0; +#X connect 16 0 7 0; +#X connect 17 0 8 0; +#X connect 18 0 30 0; +#X connect 19 0 9 0; +#X connect 20 0 10 0; +#X connect 21 0 29 0; +#X connect 22 0 11 0; +#X connect 23 0 12 0; +#X connect 24 0 13 0; +#X connect 25 0 14 0; +#X connect 26 0 15 0; +#X restore 473 507 pd decode buttons; +#X obj 93 89 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6 +1 10 -225271 -1 -1 1700 0; +#X msg 64 472 bang; +#X text 461 47 7; +#X text 355 47 0; +#X text 502 47 10; +#X obj 21 355 spigot 0; +#X obj 64 326 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 1 +; +#X obj 21 377 route analog0 analog1 analog2 analog3 analog4 analog5 +; +#X obj 435 422 route digital; +#X obj 521 442 print GARBAGE; +#X floatatom 430 507 6 0 0 0 - - -; +#X text 329 127 how many analogIns to enable:; +#X obj 330 188 tgl 15 1 empty empty empty 0 -6 0 8 -257472 -1 -1 1 +1; +#X text 353 187 enable/disable digitalIns; +#X msg 330 206 digitalIns \$1; +#X msg 330 164 analogIns 0; +#N canvas 162 133 570 420 serin 0; +#X obj 165 61 cnv 15 15 15 empty \$0-analog-number-canvas 0 4 8 0 14 +-233017 -1 0; +#X obj 60 61 hradio 15 1 1 7 empty empty empty 0 -6 0 8 -225280 -1 +-1 0; +#X obj 60 13 inlet; +#X msg 200 202 label \$1; +#X obj 200 180 makefilename %d; +#X obj 59 108 int; +#X obj 200 225 send \$0-analog-number-canvas; +#X obj 59 337 outlet; +#X msg 60 210 analogIns \$1; +#X msg 201 306 set \$1 \$2; +#X obj 59 266 trigger bang anything; +#X obj 201 286 list; +#X connect 1 0 5 0; +#X connect 2 0 1 0; +#X connect 3 0 6 0; +#X connect 4 0 3 0; +#X connect 5 0 4 0; +#X connect 5 0 8 0; +#X connect 8 0 10 0; +#X connect 9 0 7 0; +#X connect 10 0 7 0; +#X connect 10 1 11 0; +#X connect 11 0 9 0; +#X coords 0 -1 1 1 121 17 1 60 60; +#X restore 330 144 pd serin; +#X text 546 47 13; +#X text 328 33 turn on output mode for each pin (off = input); +#X obj 367 481 spigot; +#X obj 400 463 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +1; +#X obj 367 502 print; +#N canvas 0 22 269 256 speed 0; +#X obj 21 41 inlet; +#X obj 21 62 maxlib/speedlim 100; +#X obj 21 84 outlet; +#X obj 82 125 inlet; +#X obj 82 146 maxlib/speedlim 100; +#X obj 82 168 outlet; +#X obj 92 135 inlet; +#X obj 92 156 maxlib/speedlim 100; +#X obj 92 178 outlet; +#X obj 102 145 inlet; +#X obj 102 166 maxlib/speedlim 100; +#X obj 102 188 outlet; +#X obj 112 155 inlet; +#X obj 112 176 maxlib/speedlim 100; +#X obj 112 198 outlet; +#X obj 122 165 inlet; +#X obj 122 186 maxlib/speedlim 100; +#X obj 122 208 outlet; +#X obj 132 175 inlet; +#X obj 132 196 maxlib/speedlim 100; +#X obj 132 218 outlet; +#X connect 0 0 1 0; +#X connect 1 0 2 0; +#X connect 3 0 4 0; +#X connect 4 0 5 0; +#X connect 6 0 7 0; +#X connect 7 0 8 0; +#X connect 9 0 10 0; +#X connect 10 0 11 0; +#X connect 12 0 13 0; +#X connect 13 0 14 0; +#X connect 15 0 16 0; +#X connect 16 0 17 0; +#X connect 18 0 19 0; +#X connect 19 0 20 0; +#X restore 21 399 pd speed limiting for displaying values with pegging +the CPU; +#N canvas 77 268 462 312 debugging 0; +#X obj 136 31 inlet; +#X obj 324 29 inlet; +#X obj 27 31 inlet; +#X obj 162 81 spigot; +#X obj 159 106 select 255; +#X obj 184 246 print; +#X obj 184 227 list; +#X obj 43 115 spigot; +#X obj 210 201 bang; +#X obj 181 138 mapping/tolist; +#X obj 208 181 change; +#X obj 208 159 list-abs/list-len; +#X obj 43 136 print DEBUG; +#X connect 0 0 7 1; +#X connect 1 0 3 1; +#X connect 2 0 7 0; +#X connect 2 0 3 0; +#X connect 3 0 4 0; +#X connect 4 0 9 1; +#X connect 4 1 9 0; +#X connect 6 0 5 0; +#X connect 7 0 12 0; +#X connect 8 0 6 0; +#X connect 9 0 6 1; +#X connect 9 0 11 0; +#X connect 10 0 8 0; +#X connect 11 0 10 0; +#X restore 313 339 pd debugging stuff; +#X text 351 235 use raw data to save settings more compactly; +#X floatatom 21 424 5 0 0 3 analog0 - -; +#X floatatom 90 424 5 0 0 3 analog1 - -; +#X floatatom 159 424 5 0 0 3 analog2 - -; +#X floatatom 228 424 5 0 0 3 analog3 - -; +#X floatatom 297 424 5 0 0 3 analog4 - -; +#X floatatom 366 424 5 0 0 3 analog5 - -; +#X text 415 47 4; +#X text 384 47 2; +#X text 429 47 5; +#X text 444 47 6; +#X text 400 47 3; +#X msg 330 103 outputMode 13 0; +#N canvas 304 39 554 377 sending 0; +#X obj 167 325 outlet; +#X obj 49 64 tgl 15 0 empty empty 0 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 66 64 tgl 15 0 empty empty 1 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 83 64 tgl 15 0 empty empty 2 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 100 64 tgl 15 0 empty empty 3 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 117 64 tgl 15 0 empty empty 4 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 134 64 tgl 15 0 empty empty 5 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 151 64 tgl 15 0 empty empty 6 4 -6 1 12 -233017 -1 -1 0 1; +#X text 60 11 The 8th bit is not used in the bitmask \, there are 7 +bits of digital output values per byte.; +#X obj 168 64 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 185 64 tgl 15 0 empty empty 8 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 202 64 tgl 15 0 empty empty 9 4 -6 1 12 -233017 -1 -1 0 1; +#X obj 219 64 tgl 15 0 empty empty 10 0 -6 1 12 -233017 -1 -1 0 1; +#X obj 236 64 tgl 15 0 empty empty 11 0 -6 1 12 -233017 -1 -1 0 1; +#X obj 253 64 tgl 15 0 empty empty 12 0 -6 1 12 -233017 -1 -1 0 1; +#X obj 270 64 tgl 15 0 empty empty 13 0 -6 1 12 -233017 -1 -1 0 1; +#X obj 167 140 trigger bang float; +#X obj 167 105 mapping/bytemask; +#X obj 48 105 mapping/bytemask; +#X obj 380 175 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 16383 +16383; +#X obj 380 138 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 +16383; +#X obj 379 156 metro 100; +#X obj 167 200 +; +#X obj 167 163 float; +#X obj 288 161 << 7; +#X text 251 205 this will flash all pins set to output; +#X obj 380 45 inlet; +#X connect 1 0 18 0; +#X connect 2 0 18 1; +#X connect 3 0 18 2; +#X connect 4 0 18 3; +#X connect 5 0 18 4; +#X connect 6 0 18 5; +#X connect 7 0 18 6; +#X connect 9 0 17 0; +#X connect 10 0 17 1; +#X connect 11 0 17 2; +#X connect 12 0 17 3; +#X connect 13 0 17 4; +#X connect 14 0 17 5; +#X connect 15 0 17 6; +#X connect 16 0 23 0; +#X connect 16 1 24 0; +#X connect 17 0 16 0; +#X connect 18 0 23 0; +#X connect 19 0 0 0; +#X connect 20 0 21 0; +#X connect 21 0 19 0; +#X connect 22 0 0 0; +#X connect 23 0 22 0; +#X connect 24 0 22 1; +#X connect 26 0 20 0; +#X restore 20 249 pd sending digital outs; +#X msg 398 251 251 \, 9 \, 20 \, 142 \, 213; +#X text 325 292 <- argument sets port #; +#X msg 57 89 off; +#X text 475 47 8; +#X text 492 47 9; +#X text 516 47 11; +#X text 531 47 12; +#X text 370 47 1; +#X obj 35 61 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -176124 -1 +-1 5; +#X text 143 47 7; +#X text 37 47 0; +#X text 184 47 10; +#X text 230 47 13; +#X text 97 47 4; +#X text 66 47 2; +#X text 111 47 5; +#X text 126 47 6; +#X text 82 47 3; +#X text 157 47 8; +#X text 174 47 9; +#X text 200 47 11; +#X text 215 47 12; +#X text 52 47 1; +#N canvas 66 58 415 495 pwm 0; +#X obj 38 10 inlet; +#X obj 131 10 inlet; +#X msg 37 308 pwm \$1 \$2; +#X obj 38 259 pack float float; +#X obj 192 113 route float symbol; +#X obj 188 259 pack float symbol; +#X text 78 11 pin#; +#X text 179 10 PWM value or "off"; +#X obj 39 217 cyclone/gate 2; +#X msg 191 153 1; +#X msg 252 153 2; +#X obj 131 34 list; +#X obj 131 113 float; +#X obj 131 67 trigger bang anything; +#X obj 37 427 outlet; +#X obj 37 356 trigger bang anything; +#X obj 179 376 list; +#X msg 179 396 set \$1 \$2 \$3; +#X connect 0 0 12 0; +#X connect 1 0 11 0; +#X connect 2 0 15 0; +#X connect 3 0 2 0; +#X connect 4 0 9 0; +#X connect 4 0 3 1; +#X connect 4 1 10 0; +#X connect 4 1 5 1; +#X connect 5 0 2 0; +#X connect 8 0 3 0; +#X connect 8 1 5 0; +#X connect 9 0 8 0; +#X connect 10 0 8 0; +#X connect 11 0 13 0; +#X connect 12 0 8 1; +#X connect 13 0 12 0; +#X connect 13 1 4 0; +#X connect 15 0 14 0; +#X connect 15 1 16 0; +#X connect 16 0 17 0; +#X connect 17 0 14 0; +#X restore 36 115 pd pwm; +#X msg 36 135 pwm 10 0.436242; +#N canvas 45 415 403 327 pin 0; +#X obj 42 19 inlet; +#X obj 218 20 inlet; +#X obj 64 154 pack float float; +#X obj 218 92 trigger bang float; +#X text 82 19 input(0)/output(1); +#X msg 64 180 outputMode \$2 \$1; +#X obj 64 277 outlet; +#X obj 64 206 trigger bang anything; +#X obj 206 226 list; +#X msg 206 246 set \$1 \$2 \$3; +#X connect 0 0 2 0; +#X connect 1 0 3 0; +#X connect 2 0 5 0; +#X connect 3 0 2 0; +#X connect 3 1 2 1; +#X connect 5 0 7 0; +#X connect 7 0 6 0; +#X connect 7 1 8 0; +#X connect 8 0 9 0; +#X connect 9 0 6 0; +#X restore 330 82 pd pin mode; +#X obj 255 293 arduino 1; +#X text 17 7 The [arduino] object works with the Firmata firmware for +Arduino.; +#X msg 195 196 info; +#X obj 20 230 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 16383 +; +#X text 38 229 pulse all outputs; +#X connect 0 0 76 0; +#X connect 1 0 0 0; +#X connect 5 0 76 0; +#X connect 7 0 35 2; +#X connect 8 0 75 1; +#X connect 9 0 75 0; +#X connect 10 0 35 1; +#X connect 12 0 73 1; +#X connect 13 0 6 0; +#X connect 17 0 19 0; +#X connect 18 0 17 1; +#X connect 19 0 34 0; +#X connect 19 1 34 1; +#X connect 19 2 34 2; +#X connect 19 3 34 3; +#X connect 19 4 34 4; +#X connect 19 5 34 5; +#X connect 19 6 34 6; +#X connect 20 0 11 0; +#X connect 20 0 22 0; +#X connect 20 0 31 0; +#X connect 20 1 21 0; +#X connect 24 0 26 0; +#X connect 26 0 76 0; +#X connect 27 0 76 0; +#X connect 28 0 27 0; +#X connect 31 0 33 0; +#X connect 32 0 31 1; +#X connect 34 0 37 0; +#X connect 34 1 38 0; +#X connect 34 2 39 0; +#X connect 34 3 40 0; +#X connect 34 4 41 0; +#X connect 34 5 42 0; +#X connect 34 6 20 0; +#X connect 48 0 76 0; +#X connect 49 0 76 0; +#X connect 50 0 76 1; +#X connect 52 0 73 1; +#X connect 58 0 73 0; +#X connect 73 0 74 0; +#X connect 74 0 76 0; +#X connect 75 0 48 0; +#X connect 76 0 17 0; +#X connect 76 1 35 0; +#X connect 78 0 76 0; +#X connect 79 0 49 0; @@ -1,4 +1,4 @@ -#N canvas 527 196 664 533 10; +#N canvas 404 56 676 545 10; #X obj 504 -5 import flatspace; #X text 414 457 released under the GNU GPL; #X text 9 457 (C) Copyright 2006 Hans-Christoph Steiner <hans@at.or.at> @@ -57,7 +57,7 @@ #X obj 11 -9 inlet; #X obj 126 425 outlet; #X obj 494 241 outlet; -#N canvas 678 51 534 329 command 0; +#N canvas 415 22 542 337 command 0; #X obj 29 8 inlet; #X obj 148 269 outlet; #X obj 100 94 clip 0 6; @@ -84,25 +84,39 @@ #X connect 7 0 4 0; #X connect 8 0 1 0; #X restore 403 93 pd digital-out; -#N canvas 133 22 478 328 outputMode 0; -#X obj 81 11 inlet; -#X obj 105 275 outlet; -#X obj 81 70 unpack float float; -#X obj 105 176 +; -#X obj 105 197 + 130; -#X obj 178 126 * 70; -#X text 152 198 input commands = 130-143; -#X text 216 127 output commands = 200-213; -#X connect 0 0 2 0; +#N canvas 90 168 520 327 outputMode 0; +#X obj 60 11 inlet; +#X obj 175 275 outlet; +#X obj 175 87 unpack float float; +#X obj 175 176 +; +#X obj 175 197 + 130; +#X obj 296 126 * 70; +#X text 222 198 input commands = 130-143; +#X text 334 127 output commands = 200-213; +#X msg 61 229 151; +#X obj 60 48 trigger bang anything; +#X obj 61 182 float; +#X text 142 86 pin#; +#X text 312 87 mode; +#X text 89 229 send 151/ENABLE_DIGITAL_INPUT whenever a pin is set +to input; +#X obj 61 202 select 0; +#X connect 0 0 9 0; #X connect 2 0 3 0; #X connect 2 1 5 0; +#X connect 2 1 10 1; #X connect 3 0 4 0; #X connect 4 0 1 0; #X connect 5 0 3 1; +#X connect 8 0 1 0; +#X connect 9 0 10 0; +#X connect 9 1 2 0; +#X connect 10 0 14 0; +#X connect 14 0 8 0; #X restore 241 94 pd outputMode; #X obj 100 135 + 160; #X obj 171 137 + 150; -#N canvas 345 422 474 324 pwm 0; +#N canvas 345 422 478 328 pwm 0; #X obj 66 8 inlet; #X obj 102 276 outlet; #X obj 238 139 * 255; @@ -137,10 +151,9 @@ #X connect 14 0 7 0; #X connect 14 0 8 1; #X restore 30 94 pd pwm; -#X obj 22 233 print PWM; #X obj 46 52 route pwm analogIns digitalIns outputMode info; #X msg 355 94 info; -#X connect 0 0 11 0; +#X connect 0 0 10 0; #X connect 2 0 7 0; #X connect 3 0 4 0; #X connect 4 0 8 0; @@ -149,14 +162,13 @@ #X connect 7 0 1 0; #X connect 8 0 1 0; #X connect 9 0 1 0; -#X connect 9 0 10 0; -#X connect 11 0 9 0; -#X connect 11 1 2 0; -#X connect 11 2 3 0; -#X connect 11 3 6 0; -#X connect 11 4 12 0; -#X connect 11 5 5 0; -#X connect 12 0 1 0; +#X connect 10 0 9 0; +#X connect 10 1 2 0; +#X connect 10 2 3 0; +#X connect 10 3 6 0; +#X connect 10 4 11 0; +#X connect 10 5 5 0; +#X connect 11 0 1 0; #X restore 11 22 pd command processing; #X obj 66 132 moses 128; #X msg 27 346 symbol digital; |