aboutsummaryrefslogtreecommitdiff
path: root/arduino-help.pd
diff options
context:
space:
mode:
Diffstat (limited to 'arduino-help.pd')
-rw-r--r--arduino-help.pd1180
1 files changed, 523 insertions, 657 deletions
diff --git a/arduino-help.pd b/arduino-help.pd
index 681feab..fdcfdba 100644
--- a/arduino-help.pd
+++ b/arduino-help.pd
@@ -1,657 +1,523 @@
-#N canvas 515 191 722 595 10;
-#N canvas 233 472 458 308 INSTALL-NOTES 0;
-#X text 39 201 [comport] \, from pd-cvs/externals/iem/comport;
-#X text 39 185 [arduino] \, from pd-cvs/externals/hardware/arduino
-;
-#X text 39 217 [speedlim] \, from iemlib \, pd-cvs/externals/iemlib
-;
-#X text 20 27 1 General information on arduino: http://www.arduino.cc
-;
-#X text 20 61 2 You need the firmware for Pduino: http://at.or.at/hans/pd/objects.html
-;
-#X text 20 109 3 Don't forget to upload the firmware onto your arduino
-board !;
-#X text 21 159 4 Pduino needs the following externals and abstractions:
-;
-#X text 22 257 5 If you still have troubles \, mail to the pd list
-!;
-#X restore 25 92 pd INSTALL-NOTES;
-#X text 150 93 <- read this first !;
-#X obj 26 180 hradio 15 1 0 8 empty empty empty 0 -6 0 8 -260818 -1
--1 0;
-#X msg 26 198 open \$1;
-#X floatatom 109 197 5 0 0 0 - - -;
-#X obj 402 69 r \$0-arduino;
-#X msg 37 219 close;
-#X msg 47 240 info;
-#X text 21 157 select/close the serial port:;
-#X obj 26 262 s \$0-arduino;
-#N canvas 328 479 574 272 DIGITAL-OUTPUT 0;
-#X text 21 78 I/O the individual pins:;
-#X obj 42 118 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1;
-#X obj 60 118 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 79 118 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 1;
-#X obj 97 118 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 116 118 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 134 118 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 153 118 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 171 118 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 190 118 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 208 118 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 227 118 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 245 118 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 264 118 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 284 98 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1
-;
-#X obj 24 118 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
-#N canvas 46 604 662 312 send-to-arduino................. 0;
-#X obj 39 44 inlet;
-#X obj 79 44 inlet;
-#X obj 118 44 inlet;
-#X obj 158 44 inlet;
-#X obj 198 44 inlet;
-#X obj 238 44 inlet;
-#X obj 277 44 inlet;
-#X obj 317 44 inlet;
-#X obj 358 43 inlet;
-#X obj 398 43 inlet;
-#X obj 437 43 inlet;
-#X obj 477 43 inlet;
-#X obj 517 43 inlet;
-#X obj 556 43 inlet;
-#X obj 358 160 trigger bang float;
-#X obj 358 220 +;
-#X obj 358 183 float;
-#X obj 479 181 << 8;
-#N canvas 15 158 617 368 bytemask------------------------------ 0;
-#X obj 269 332 outlet;
-#X obj 269 279 float;
-#X obj 318 183 |;
-#X obj 111 239 -;
-#X obj 110 204 float;
-#X obj 110 184 trigger bang float;
-#X obj 231 204 &;
-#X obj 183 142 route 0 1;
-#X msg 36 56 \$1 1;
-#X msg 106 56 \$1 2;
-#X msg 176 56 \$1 4;
-#X msg 246 56 \$1 8;
-#X msg 316 56 \$1 16;
-#X msg 386 56 \$1 32;
-#X msg 456 56 \$1 64;
-#X msg 526 56 \$1 128;
-#X obj 36 15 inlet;
-#X obj 106 15 inlet;
-#X obj 176 15 inlet;
-#X obj 246 15 inlet;
-#X obj 316 15 inlet;
-#X obj 386 15 inlet;
-#X obj 456 15 inlet;
-#X obj 526 15 inlet;
-#X obj 36 35 change;
-#X obj 106 35 change;
-#X obj 176 35 change;
-#X obj 246 35 change;
-#X obj 316 35 change;
-#X obj 386 35 change;
-#X obj 456 35 change;
-#X obj 526 35 change;
-#X connect 1 0 2 1;
-#X connect 1 0 4 1;
-#X connect 1 0 6 1;
-#X connect 1 0 0 0;
-#X connect 2 0 1 0;
-#X connect 3 0 1 0;
-#X connect 4 0 3 0;
-#X connect 5 0 4 0;
-#X connect 5 1 6 0;
-#X connect 6 0 3 1;
-#X connect 7 0 5 0;
-#X connect 7 1 2 0;
-#X connect 8 0 7 0;
-#X connect 9 0 7 0;
-#X connect 10 0 7 0;
-#X connect 11 0 7 0;
-#X connect 12 0 7 0;
-#X connect 13 0 7 0;
-#X connect 14 0 7 0;
-#X connect 15 0 7 0;
-#X connect 16 0 24 0;
-#X connect 17 0 25 0;
-#X connect 18 0 26 0;
-#X connect 19 0 27 0;
-#X connect 20 0 28 0;
-#X connect 21 0 29 0;
-#X connect 22 0 30 0;
-#X connect 23 0 31 0;
-#X connect 24 0 8 0;
-#X connect 25 0 9 0;
-#X connect 26 0 10 0;
-#X connect 27 0 11 0;
-#X connect 28 0 12 0;
-#X connect 29 0 13 0;
-#X connect 30 0 14 0;
-#X connect 31 0 15 0;
-#X restore 39 100 pd bytemask------------------------------;
-#N canvas 378 173 613 364 bytemask------------------ 0;
-#X obj 269 332 outlet;
-#X obj 269 279 float;
-#X obj 318 183 |;
-#X obj 111 239 -;
-#X obj 110 204 float;
-#X obj 110 184 trigger bang float;
-#X obj 231 204 &;
-#X obj 183 142 route 0 1;
-#X msg 36 56 \$1 1;
-#X msg 106 56 \$1 2;
-#X msg 176 56 \$1 4;
-#X msg 246 56 \$1 8;
-#X msg 316 56 \$1 16;
-#X msg 386 56 \$1 32;
-#X msg 456 56 \$1 64;
-#X msg 526 56 \$1 128;
-#X obj 36 15 inlet;
-#X obj 106 15 inlet;
-#X obj 176 15 inlet;
-#X obj 246 15 inlet;
-#X obj 316 15 inlet;
-#X obj 386 15 inlet;
-#X obj 456 15 inlet;
-#X obj 526 15 inlet;
-#X obj 36 35 change;
-#X obj 106 35 change;
-#X obj 176 35 change;
-#X obj 246 35 change;
-#X obj 316 35 change;
-#X obj 386 35 change;
-#X obj 456 35 change;
-#X obj 526 35 change;
-#X connect 1 0 2 1;
-#X connect 1 0 4 1;
-#X connect 1 0 6 1;
-#X connect 1 0 0 0;
-#X connect 2 0 1 0;
-#X connect 3 0 1 0;
-#X connect 4 0 3 0;
-#X connect 5 0 4 0;
-#X connect 5 1 6 0;
-#X connect 6 0 3 1;
-#X connect 7 0 5 0;
-#X connect 7 1 2 0;
-#X connect 8 0 7 0;
-#X connect 9 0 7 0;
-#X connect 10 0 7 0;
-#X connect 11 0 7 0;
-#X connect 12 0 7 0;
-#X connect 13 0 7 0;
-#X connect 14 0 7 0;
-#X connect 15 0 7 0;
-#X connect 16 0 24 0;
-#X connect 17 0 25 0;
-#X connect 18 0 26 0;
-#X connect 19 0 27 0;
-#X connect 20 0 28 0;
-#X connect 21 0 29 0;
-#X connect 22 0 30 0;
-#X connect 23 0 31 0;
-#X connect 24 0 8 0;
-#X connect 25 0 9 0;
-#X connect 26 0 10 0;
-#X connect 27 0 11 0;
-#X connect 28 0 12 0;
-#X connect 29 0 13 0;
-#X connect 30 0 14 0;
-#X connect 31 0 15 0;
-#X restore 358 101 pd bytemask------------------;
-#X obj 358 251 outlet;
-#X connect 0 0 18 0;
-#X connect 1 0 18 1;
-#X connect 2 0 18 2;
-#X connect 3 0 18 3;
-#X connect 4 0 18 4;
-#X connect 5 0 18 5;
-#X connect 6 0 18 6;
-#X connect 7 0 18 7;
-#X connect 8 0 19 0;
-#X connect 9 0 19 1;
-#X connect 10 0 19 2;
-#X connect 11 0 19 3;
-#X connect 12 0 19 4;
-#X connect 13 0 19 5;
-#X connect 14 0 16 0;
-#X connect 14 1 17 0;
-#X connect 15 0 20 0;
-#X connect 16 0 15 0;
-#X connect 17 0 15 1;
-#X connect 18 0 16 0;
-#X connect 19 0 14 0;
-#X restore 24 145 pd send-to-arduino.................;
-#X obj 24 196 s \$0-arduino;
-#X floatatom 41 172 5 0 0 0 - - -;
-#X text 124 175 the pins are controlled with decimal numbers \, so
-you have to convert the binary toggle to a decimal number;
-#X text 20 32 NOTE: don't forget to set pins to output mode first!
-;
-#X connect 1 0 16 1;
-#X connect 2 0 16 2;
-#X connect 3 0 16 3;
-#X connect 4 0 16 4;
-#X connect 5 0 16 5;
-#X connect 6 0 16 6;
-#X connect 7 0 16 7;
-#X connect 8 0 16 8;
-#X connect 9 0 16 9;
-#X connect 10 0 16 10;
-#X connect 11 0 16 11;
-#X connect 12 0 16 12;
-#X connect 13 0 16 13;
-#X connect 14 0 13 0;
-#X connect 14 0 12 0;
-#X connect 14 0 11 0;
-#X connect 14 0 10 0;
-#X connect 14 0 9 0;
-#X connect 14 0 8 0;
-#X connect 14 0 7 0;
-#X connect 14 0 6 0;
-#X connect 14 0 5 0;
-#X connect 14 0 4 0;
-#X connect 14 0 3 0;
-#X connect 14 0 2 0;
-#X connect 14 0 1 0;
-#X connect 14 0 15 0;
-#X connect 15 0 16 0;
-#X connect 16 0 17 0;
-#X connect 16 0 18 0;
-#X restore 171 438 pd DIGITAL-OUTPUT;
-#N canvas 494 94 550 252 DIGITAL-INPUT 0;
-#X obj 46 128 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 2;
-#X obj 64 128 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 4;
-#X obj 82 128 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 8;
-#X obj 100 128 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 16 16
-;
-#X obj 119 128 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 32 32
-;
-#X obj 137 128 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 64 64
-;
-#X obj 156 128 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 128
-;
-#X obj 174 128 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 256
-;
-#X obj 194 128 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 512
-;
-#X obj 211 128 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1024
-;
-#X obj 230 128 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 2048
-;
-#X obj 248 128 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 4096
-;
-#X obj 267 128 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 8192
-;
-#X obj 28 128 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
-#N canvas 64 160 778 300 send-to-arduino................. 0;
-#X obj 35 55 route digital;
-#X obj 35 229 outlet;
-#X obj 85 229 outlet;
-#X obj 137 229 outlet;
-#X obj 187 229 outlet;
-#X obj 237 229 outlet;
-#X obj 287 229 outlet;
-#X obj 339 229 outlet;
-#X obj 389 229 outlet;
-#X obj 437 229 outlet;
-#X obj 487 229 outlet;
-#X obj 539 229 outlet;
-#X obj 589 229 outlet;
-#X obj 637 229 outlet;
-#X obj 687 229 outlet;
-#X obj 35 25 inlet;
-#X text 289 82 bitmask to get the individual inputs;
-#X obj 665 171 & 8192;
-#X obj 613 169 & 4096;
-#X obj 553 169 & 2048;
-#X obj 35 169 & 1;
-#X obj 79 169 & 2;
-#X obj 125 171 & 4;
-#X obj 171 169 & 8;
-#X obj 217 169 & 16;
-#X obj 264 169 & 32;
-#X obj 313 169 & 64;
-#X obj 356 169 & 128;
-#X obj 403 169 & 256;
-#X obj 447 169 & 512;
-#X obj 495 169 & 1024;
-#X connect 0 0 17 0;
-#X connect 0 0 18 0;
-#X connect 0 0 19 0;
-#X connect 0 0 20 0;
-#X connect 0 0 21 0;
-#X connect 0 0 22 0;
-#X connect 0 0 23 0;
-#X connect 0 0 24 0;
-#X connect 0 0 25 0;
-#X connect 0 0 26 0;
-#X connect 0 0 27 0;
-#X connect 0 0 28 0;
-#X connect 0 0 29 0;
-#X connect 0 0 30 0;
-#X connect 15 0 0 0;
-#X connect 17 0 14 0;
-#X connect 18 0 13 0;
-#X connect 19 0 12 0;
-#X connect 20 0 1 0;
-#X connect 21 0 2 0;
-#X connect 22 0 3 0;
-#X connect 23 0 4 0;
-#X connect 24 0 5 0;
-#X connect 25 0 6 0;
-#X connect 26 0 7 0;
-#X connect 27 0 8 0;
-#X connect 28 0 9 0;
-#X connect 29 0 10 0;
-#X connect 30 0 11 0;
-#X restore 28 93 pd send-to-arduino.................;
-#X obj 28 69 r \$0-arduino-out;
-#X text 301 75 connect the Digital Input;
-#X text 301 92 to the ground (=0) or to;
-#X text 301 109 the positive voltage (=1);
-#X text 27 167 NOTE: if you don't connect your pin neither to + nor
-to the ground \, you will get random values (0 or 1) - to avoid that
-\, you could connect all the pins to the ground !;
-#X text 28 34 NOTE: don't forget to set pins to input mode first!;
-#X connect 14 0 13 0;
-#X connect 14 1 0 0;
-#X connect 14 2 1 0;
-#X connect 14 3 2 0;
-#X connect 14 4 3 0;
-#X connect 14 5 4 0;
-#X connect 14 6 5 0;
-#X connect 14 7 6 0;
-#X connect 14 8 7 0;
-#X connect 14 9 8 0;
-#X connect 14 10 9 0;
-#X connect 14 11 10 0;
-#X connect 14 12 11 0;
-#X connect 14 13 12 0;
-#X connect 15 0 14 0;
-#X restore 178 414 pd DIGITAL-INPUT;
-#X obj 402 111 s \$0-arduino-out;
-#X text 525 239 (0=input \, 1=output);
-#X obj 289 212 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1;
-#X obj 307 212 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 325 212 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 343 212 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 361 212 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 379 212 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 397 212 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 415 212 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 433 212 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 1 1;
-#X obj 451 212 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 469 212 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 487 212 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 505 212 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 1 1
-;
-#X obj 531 192 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0
-1;
-#X text 530 177 all;
-#X obj 271 212 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
-#N canvas 365 337 762 312 send-to-arduino---------------- 0;
-#X obj 49 54 inlet;
-#X obj 89 54 inlet;
-#X obj 128 54 inlet;
-#X obj 168 54 inlet;
-#X obj 208 54 inlet;
-#X obj 248 54 inlet;
-#X obj 287 54 inlet;
-#X obj 327 54 inlet;
-#X obj 368 53 inlet;
-#X obj 408 53 inlet;
-#X obj 447 53 inlet;
-#X obj 487 53 inlet;
-#X obj 527 53 inlet;
-#X msg 49 96 outputMode 0 \$1;
-#X msg 89 118 outputMode 1 \$1;
-#X msg 128 140 outputMode 2 \$1;
-#X msg 168 160 outputMode 3 \$1;
-#X msg 208 92 outputMode 4 \$1;
-#X msg 248 114 outputMode 5 \$1;
-#X msg 287 136 outputMode 6 \$1;
-#X msg 327 156 outputMode 7 \$1;
-#X msg 368 88 outputMode 8 \$1;
-#X msg 408 110 outputMode 9 \$1;
-#X msg 447 132 outputMode 10 \$1;
-#X msg 487 152 outputMode 11 \$1;
-#X msg 527 80 outputMode 12 \$1;
-#X obj 566 53 inlet;
-#X msg 566 100 outputMode 13 \$1;
-#X obj 305 226 outlet;
-#X connect 0 0 13 0;
-#X connect 1 0 14 0;
-#X connect 2 0 15 0;
-#X connect 3 0 16 0;
-#X connect 4 0 17 0;
-#X connect 5 0 18 0;
-#X connect 6 0 19 0;
-#X connect 7 0 20 0;
-#X connect 8 0 21 0;
-#X connect 9 0 22 0;
-#X connect 10 0 23 0;
-#X connect 11 0 24 0;
-#X connect 12 0 25 0;
-#X connect 13 0 28 0;
-#X connect 14 0 28 0;
-#X connect 15 0 28 0;
-#X connect 16 0 28 0;
-#X connect 17 0 28 0;
-#X connect 18 0 28 0;
-#X connect 19 0 28 0;
-#X connect 20 0 28 0;
-#X connect 21 0 28 0;
-#X connect 22 0 28 0;
-#X connect 23 0 28 0;
-#X connect 24 0 28 0;
-#X connect 25 0 28 0;
-#X connect 26 0 27 0;
-#X connect 27 0 28 0;
-#X restore 271 239 pd send-to-arduino----------------;
-#X obj 269 324 s \$0-arduino;
-#X msg 294 265 outputMode 13 1;
-#X text 412 265 set pin 13 to output mode;
-#X text 270 159 Set input/output mode of the pins for digital IO:;
-#N canvas 374 455 496 348 ANALOG-INPUT 0;
-#X obj 29 59 r \$0-arduino-out;
-#X obj 29 97 spigot 0;
-#X obj 91 94 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1
-;
-#X obj 29 139 route analog0 analog1 analog2 analog3 analog4 analog5
-;
-#X floatatom 29 220 5 0 0 3 analog0 - -;
-#X floatatom 102 219 5 0 0 3 analog1 - -;
-#X floatatom 175 219 5 0 0 3 analog2 - -;
-#X floatatom 248 220 5 0 0 3 analog3 - -;
-#X floatatom 321 220 5 0 0 3 analog4 - -;
-#X floatatom 395 221 5 0 0 3 analog5 - -;
-#N canvas 400 102 662 136 speed-limiting-to-save-cpu------------------------
-0;
-#X obj 19 31 inlet;
-#X obj 19 55 speedlim 100;
-#X obj 19 79 outlet;
-#X obj 119 31 inlet;
-#X obj 119 55 speedlim 100;
-#X obj 119 79 outlet;
-#X obj 219 31 inlet;
-#X obj 219 55 speedlim 100;
-#X obj 219 79 outlet;
-#X obj 319 31 inlet;
-#X obj 319 55 speedlim 100;
-#X obj 319 79 outlet;
-#X obj 419 31 inlet;
-#X obj 419 55 speedlim 100;
-#X obj 419 79 outlet;
-#X obj 519 31 inlet;
-#X obj 519 55 speedlim 100;
-#X obj 519 79 outlet;
-#X connect 0 0 1 0;
-#X connect 1 0 2 0;
-#X connect 3 0 4 0;
-#X connect 4 0 5 0;
-#X connect 6 0 7 0;
-#X connect 7 0 8 0;
-#X connect 9 0 10 0;
-#X connect 10 0 11 0;
-#X connect 12 0 13 0;
-#X connect 13 0 14 0;
-#X connect 15 0 16 0;
-#X connect 16 0 17 0;
-#X restore 29 173 pd speed-limiting-to-save-cpu------------------------
-;
-#X text 30 24 Analog Inputs of the Arduino-Board:;
-#X text 119 96 <- enable analog inputs;
-#X text 25 283 NOTE: connect the analog pins that you don't use to
-the ground \, if you want to avoid flickering of the values !;
-#X connect 0 0 1 0;
-#X connect 1 0 3 0;
-#X connect 2 0 1 1;
-#X connect 3 0 10 0;
-#X connect 3 1 10 1;
-#X connect 3 2 10 2;
-#X connect 3 3 10 3;
-#X connect 3 4 10 4;
-#X connect 3 5 10 5;
-#X connect 10 0 4 0;
-#X connect 10 1 5 0;
-#X connect 10 2 6 0;
-#X connect 10 3 7 0;
-#X connect 10 4 8 0;
-#X connect 10 5 9 0;
-#X restore 185 462 pd ANALOG-INPUT;
-#N canvas 462 515 546 362 ANALOG-OUTPUT-PWM 0;
-#X text 16 17 Analog Output \, PWM (Pulse Width Modulation);
-#X text 16 53 With the help of PWM you can write analog values to the
-pins 9 \, 10 \, 11 of your Arduino board.;
-#X text 17 89 NOTE: don't forget to set the pins to output mode first
-!;
-#X msg 21 189 pwm 9 \$1;
-#X obj 24 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6
-1 10 -260818 -1 -1 0 1;
-#X msg 31 234 pwm 9 off;
-#X obj 21 258 s \$0-arduino;
-#X text 29 215 disable PWM:;
-#X obj 192 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
--6 1 10 -260818 -1 -1 0 1;
-#X obj 189 258 s \$0-arduino;
-#X text 197 215 disable PWM:;
-#X obj 354 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
--6 1 10 -260818 -1 -1 0 1;
-#X obj 351 258 s \$0-arduino;
-#X text 359 215 disable PWM:;
-#X text 21 133 PIN9:;
-#X text 189 135 PIN10:;
-#X text 351 135 PIN11:;
-#X msg 189 189 pwm 10 \$1;
-#X msg 199 234 pwm 10 off;
-#X msg 351 189 pwm 11 \$1;
-#X msg 361 234 pwm 11 off;
-#X text 21 319 NOTE: it is possible to write as well on the other pins
-to send software-PWM signals (will come soon ...);
-#X connect 3 0 6 0;
-#X connect 4 0 3 0;
-#X connect 5 0 6 0;
-#X connect 8 0 17 0;
-#X connect 11 0 19 0;
-#X connect 17 0 9 0;
-#X connect 18 0 9 0;
-#X connect 19 0 12 0;
-#X connect 20 0 12 0;
-#X restore 150 487 pd ANALOG-OUTPUT-PWM;
-#X text 25 357 With the Arduino-Board you can do digital and analog
-input and output \, as descriped in the following sub-patches:;
-#X text 301 437 <- example of Digital Output;
-#X text 301 415 <- example of Digital Input;
-#X text 301 463 <- example of Analog Input;
-#X text 301 488 <- example of Analog Output;
-#X text 259 30 Arduino Interface For PD;
-#X text 286 4 ::::_PDUINO_::::;
-#X text 475 531 2006 \, released under GNU GPL \; Gerda Strobl \, Georg
-Holzmann;
-#X text 86 241 <- list devices;
-#X obj 404 90 arduino 1;
-#X obj 534 89 spigot;
-#X obj 565 67 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0
-1;
-#X obj 534 113 print;
-#X obj 79 25 hradio 15 1 0 7 empty empty empty 0 -8 0 10 -262144 -1
--1 0;
-#X floatatom 91 55 5 0 0 0 - - -;
-#X msg 202 55 analogIns \$1;
-#X msg 387 300 8192;
-#X msg 426 299 16383;
-#X msg 467 300 0;
-#X obj 490 326 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0
-1;
-#X obj 467 353 metro 1000;
-#X obj 487 387 delay 500;
-#X msg 440 36 version;
-#X msg 500 36 info;
-#X obj 305 118 route version;
-#X obj 303 138 print version;
-#X connect 2 0 3 0;
-#X connect 2 0 4 0;
-#X connect 3 0 9 0;
-#X connect 5 0 46 0;
-#X connect 6 0 9 0;
-#X connect 7 0 9 0;
-#X connect 14 0 30 1;
-#X connect 15 0 30 2;
-#X connect 16 0 30 3;
-#X connect 17 0 30 4;
-#X connect 18 0 30 5;
-#X connect 19 0 30 6;
-#X connect 20 0 30 7;
-#X connect 21 0 30 8;
-#X connect 22 0 30 9;
-#X connect 23 0 30 10;
-#X connect 24 0 30 11;
-#X connect 25 0 30 12;
-#X connect 26 0 30 13;
-#X connect 27 0 26 0;
-#X connect 27 0 25 0;
-#X connect 27 0 24 0;
-#X connect 27 0 23 0;
-#X connect 27 0 22 0;
-#X connect 27 0 21 0;
-#X connect 27 0 20 0;
-#X connect 27 0 19 0;
-#X connect 27 0 18 0;
-#X connect 27 0 17 0;
-#X connect 27 0 16 0;
-#X connect 27 0 15 0;
-#X connect 27 0 14 0;
-#X connect 27 0 29 0;
-#X connect 29 0 30 0;
-#X connect 30 0 31 0;
-#X connect 32 0 31 0;
-#X connect 46 0 12 0;
-#X connect 46 0 61 0;
-#X connect 46 1 47 0;
-#X connect 47 0 49 0;
-#X connect 48 0 47 1;
-#X connect 50 0 51 0;
-#X connect 50 0 52 0;
-#X connect 52 0 46 0;
-#X connect 53 0 31 0;
-#X connect 54 0 31 0;
-#X connect 55 0 31 0;
-#X connect 56 0 57 0;
-#X connect 57 0 54 0;
-#X connect 57 0 58 0;
-#X connect 58 0 55 0;
-#X connect 59 0 46 0;
-#X connect 60 0 46 0;
-#X connect 61 0 62 0;
+#N canvas 119 23 691 591 10;
+#N canvas 233 472 462 312 INSTALL-NOTES 0;
+#X text 39 201 [comport] \, from pd-cvs/externals/iem/comport;
+#X text 39 185 [arduino] \, from pd-cvs/externals/hardware/arduino
+;
+#X text 39 217 [speedlim] \, from iemlib \, pd-cvs/externals/iemlib
+;
+#X text 20 27 1 General information on arduino: http://www.arduino.cc
+;
+#X text 20 61 2 You need the firmware for Pduino: http://at.or.at/hans/pd/objects.html
+;
+#X text 20 109 3 Don't forget to upload the firmware onto your arduino
+board !;
+#X text 21 159 4 Pduino needs the following externals and abstractions:
+;
+#X text 22 257 5 If you still have troubles \, mail to the pd list
+!;
+#X restore 25 92 pd INSTALL-NOTES;
+#X text 150 93 <- read this first !;
+#X obj 26 198 hradio 15 1 0 8 empty empty empty 0 -6 0 8 -260818 -1
+-1 0;
+#X msg 26 216 open \$1;
+#X floatatom 109 215 5 0 0 0 - - -;
+#X msg 37 237 close;
+#X msg 47 258 info;
+#X text 21 175 select/close the serial port:;
+#N canvas 248 49 455 332 DIGITAL-OUTPUT 1;
+#X text 72 97 I/O the individual pins:;
+#X text 20 22 NOTE: don't forget to set pins to output mode first!
+;
+#X obj 40 194 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577
+0;
+#X msg 49 197 digital 13 0;
+#X obj 168 134 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 185 134 tgl 15 0 empty empty 8 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 202 134 tgl 15 0 empty empty 9 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 219 134 tgl 15 0 empty empty 10 0 -6 1 12 -233017 -1 -1 0 1
+;
+#X obj 236 134 tgl 15 0 empty empty 11 0 -6 1 12 -233017 -1 -1 0 1
+;
+#X obj 253 134 tgl 15 0 empty empty 12 0 -6 1 12 -233017 -1 -1 0 1
+;
+#X obj 270 134 tgl 15 0 empty empty 13 0 -6 1 12 -233017 -1 -1 0 1
+;
+#X obj 49 134 tgl 15 0 empty empty 0 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 66 134 tgl 15 0 empty empty 1 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 83 134 tgl 15 0 empty empty 2 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 100 134 tgl 15 0 empty empty 3 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 117 134 tgl 15 0 empty empty 5 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 134 134 tgl 15 0 empty empty 6 4 -6 1 12 -233017 -1 -1 0 1;
+#X obj 151 134 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
+#N canvas 478 328 806 356 generate 0;
+#X obj 49 24 inlet;
+#X obj 89 24 inlet;
+#X obj 128 24 inlet;
+#X obj 168 24 inlet;
+#X obj 208 24 inlet;
+#X obj 248 24 inlet;
+#X obj 287 24 inlet;
+#X obj 327 24 inlet;
+#X obj 368 23 inlet;
+#X obj 408 23 inlet;
+#X obj 447 23 inlet;
+#X obj 487 23 inlet;
+#X obj 527 23 inlet;
+#X msg 49 66 digital 0 \$1;
+#X msg 89 88 digital 1 \$1;
+#X msg 128 110 digital 2 \$1;
+#X msg 168 130 digital 3 \$1;
+#X msg 208 62 digital 4 \$1;
+#X msg 248 84 digital 5 \$1;
+#X msg 287 106 digital 6 \$1;
+#X msg 327 126 digital 7 \$1;
+#X msg 368 58 digital 8 \$1;
+#X msg 408 80 digital 9 \$1;
+#X msg 447 102 digital 10 \$1;
+#X msg 487 122 digital 11 \$1;
+#X msg 527 50 digital 12 \$1;
+#X obj 566 23 inlet;
+#X msg 566 70 digital 13 \$1;
+#X obj 305 196 prepend set;
+#X obj 305 254 outlet;
+#X obj 305 215 trigger bang anything;
+#X connect 0 0 13 0;
+#X connect 1 0 14 0;
+#X connect 2 0 15 0;
+#X connect 3 0 16 0;
+#X connect 4 0 17 0;
+#X connect 5 0 18 0;
+#X connect 6 0 19 0;
+#X connect 7 0 20 0;
+#X connect 8 0 21 0;
+#X connect 9 0 22 0;
+#X connect 10 0 23 0;
+#X connect 11 0 24 0;
+#X connect 12 0 25 0;
+#X connect 13 0 28 0;
+#X connect 14 0 28 0;
+#X connect 15 0 28 0;
+#X connect 16 0 28 0;
+#X connect 17 0 28 0;
+#X connect 18 0 28 0;
+#X connect 19 0 28 0;
+#X connect 20 0 28 0;
+#X connect 21 0 28 0;
+#X connect 22 0 28 0;
+#X connect 23 0 28 0;
+#X connect 24 0 28 0;
+#X connect 25 0 28 0;
+#X connect 26 0 27 0;
+#X connect 27 0 28 0;
+#X connect 28 0 30 0;
+#X connect 30 0 29 0;
+#X connect 30 1 29 0;
+#X restore 49 158 pd generate digital out messages;
+#X obj 319 109 tgl 25 0 empty empty ALL 2 12 0 12 -262144 -1 -1 0 1
+;
+#X obj 319 70 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 16383
+;
+#X obj 319 88 metro 100;
+#X obj 49 280 send \$0-arduino;
+#X text 143 197 <-- this is the message format;
+#X text 181 69 strobe all pins -->;
+#X connect 3 0 22 0;
+#X connect 4 0 18 7;
+#X connect 5 0 18 8;
+#X connect 6 0 18 9;
+#X connect 7 0 18 10;
+#X connect 8 0 18 11;
+#X connect 9 0 18 12;
+#X connect 10 0 18 13;
+#X connect 11 0 18 0;
+#X connect 12 0 18 1;
+#X connect 13 0 18 2;
+#X connect 14 0 18 3;
+#X connect 15 0 18 4;
+#X connect 16 0 18 5;
+#X connect 17 0 18 6;
+#X connect 18 0 3 0;
+#X connect 19 0 10 0;
+#X connect 19 0 9 0;
+#X connect 19 0 8 0;
+#X connect 19 0 7 0;
+#X connect 19 0 6 0;
+#X connect 19 0 5 0;
+#X connect 19 0 4 0;
+#X connect 19 0 17 0;
+#X connect 19 0 16 0;
+#X connect 19 0 15 0;
+#X connect 19 0 14 0;
+#X connect 19 0 13 0;
+#X connect 19 0 12 0;
+#X connect 19 0 11 0;
+#X connect 20 0 21 0;
+#X connect 21 0 19 0;
+#X restore 61 428 pd DIGITAL-OUTPUT;
+#N canvas 494 94 562 264 DIGITAL-INPUT 0;
+#X obj 46 128 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 2;
+#X obj 64 128 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 4;
+#X obj 82 128 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 8;
+#X obj 100 128 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 16
+;
+#X obj 119 128 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 32
+;
+#X obj 137 128 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 64
+;
+#X obj 155 128 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 128
+;
+#X obj 173 128 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 256
+;
+#X obj 191 128 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 512
+;
+#X obj 209 128 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1024
+;
+#X obj 227 128 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 2048
+;
+#X obj 245 128 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 4096
+;
+#X obj 263 128 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 8192
+;
+#X obj 28 128 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 28 49 r \$0-arduino-out;
+#X text 301 75 connect the Digital Input;
+#X text 301 92 to the ground (=0) or to;
+#X text 301 109 the positive voltage (=1);
+#X text 27 167 NOTE: if you don't connect your pin neither to + nor
+to the ground \, you will get random values (0 or 1) - to avoid that
+\, you could connect all the pins to the ground !;
+#X text 28 14 NOTE: don't forget to set pins to input mode first!;
+#X obj 28 93 route 0 1 2 3 4 5 6 7 8 9 10 11 12 13;
+#X obj 28 71 route digital;
+#X connect 14 0 21 0;
+#X connect 20 0 13 0;
+#X connect 20 1 0 0;
+#X connect 20 2 1 0;
+#X connect 20 3 2 0;
+#X connect 20 4 3 0;
+#X connect 20 5 4 0;
+#X connect 20 6 5 0;
+#X connect 20 7 6 0;
+#X connect 20 8 7 0;
+#X connect 20 9 8 0;
+#X connect 20 10 9 0;
+#X connect 20 11 10 0;
+#X connect 20 12 11 0;
+#X connect 20 13 12 0;
+#X connect 21 0 20 0;
+#X restore 68 404 pd DIGITAL-INPUT;
+#X text 525 229 (0=input \, 1=output);
+#X obj 289 202 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 307 202 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 325 202 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 343 202 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 361 202 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 379 202 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 397 202 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 415 202 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 433 202 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 1;
+#X obj 451 202 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1
+;
+#X obj 469 202 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 1
+;
+#X obj 487 202 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 1
+;
+#X obj 505 202 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 1
+;
+#X obj 531 182 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0
+1;
+#X text 530 167 all;
+#X obj 271 202 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
+#N canvas 365 337 766 316 send-to-arduino---------------- 0;
+#X obj 49 54 inlet;
+#X obj 89 54 inlet;
+#X obj 128 54 inlet;
+#X obj 168 54 inlet;
+#X obj 208 54 inlet;
+#X obj 248 54 inlet;
+#X obj 287 54 inlet;
+#X obj 327 54 inlet;
+#X obj 368 53 inlet;
+#X obj 408 53 inlet;
+#X obj 447 53 inlet;
+#X obj 487 53 inlet;
+#X obj 527 53 inlet;
+#X msg 49 96 pinMode 0 \$1;
+#X msg 89 118 pinMode 1 \$1;
+#X msg 128 140 pinMode 2 \$1;
+#X msg 168 160 pinMode 3 \$1;
+#X msg 208 92 pinMode 4 \$1;
+#X msg 248 114 pinMode 5 \$1;
+#X msg 287 136 pinMode 6 \$1;
+#X msg 327 156 pinMode 7 \$1;
+#X msg 368 88 pinMode 8 \$1;
+#X msg 408 110 pinMode 9 \$1;
+#X msg 447 132 pinMode 10 \$1;
+#X msg 487 152 pinMode 11 \$1;
+#X msg 527 80 pinMode 12 \$1;
+#X obj 566 53 inlet;
+#X msg 566 100 pinMode 13 \$1;
+#X obj 305 226 outlet;
+#X connect 0 0 13 0;
+#X connect 1 0 14 0;
+#X connect 2 0 15 0;
+#X connect 3 0 16 0;
+#X connect 4 0 17 0;
+#X connect 5 0 18 0;
+#X connect 6 0 19 0;
+#X connect 7 0 20 0;
+#X connect 8 0 21 0;
+#X connect 9 0 22 0;
+#X connect 10 0 23 0;
+#X connect 11 0 24 0;
+#X connect 12 0 25 0;
+#X connect 13 0 28 0;
+#X connect 14 0 28 0;
+#X connect 15 0 28 0;
+#X connect 16 0 28 0;
+#X connect 17 0 28 0;
+#X connect 18 0 28 0;
+#X connect 19 0 28 0;
+#X connect 20 0 28 0;
+#X connect 21 0 28 0;
+#X connect 22 0 28 0;
+#X connect 23 0 28 0;
+#X connect 24 0 28 0;
+#X connect 25 0 28 0;
+#X connect 26 0 27 0;
+#X connect 27 0 28 0;
+#X restore 271 229 pd send-to-arduino----------------;
+#X msg 294 255 pinMode 13 1;
+#X text 412 255 set pin 13 to output mode;
+#X text 270 149 Set input/output mode of the pins for digital IO:;
+#N canvas 374 455 496 348 ANALOG-INPUT 0;
+#X obj 29 59 r \$0-arduino-out;
+#X obj 29 97 spigot 0;
+#X obj 91 94 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1
+;
+#X obj 29 139 route analog0 analog1 analog2 analog3 analog4 analog5
+;
+#X floatatom 29 220 5 0 0 3 analog0 - -;
+#X floatatom 102 219 5 0 0 3 analog1 - -;
+#X floatatom 175 219 5 0 0 3 analog2 - -;
+#X floatatom 248 220 5 0 0 3 analog3 - -;
+#X floatatom 321 220 5 0 0 3 analog4 - -;
+#X floatatom 395 221 5 0 0 3 analog5 - -;
+#N canvas 400 102 662 136 speed-limiting-to-save-cpu------------------------
+0;
+#X obj 19 31 inlet;
+#X obj 19 55 speedlim 100;
+#X obj 19 79 outlet;
+#X obj 119 31 inlet;
+#X obj 119 55 speedlim 100;
+#X obj 119 79 outlet;
+#X obj 219 31 inlet;
+#X obj 219 55 speedlim 100;
+#X obj 219 79 outlet;
+#X obj 319 31 inlet;
+#X obj 319 55 speedlim 100;
+#X obj 319 79 outlet;
+#X obj 419 31 inlet;
+#X obj 419 55 speedlim 100;
+#X obj 419 79 outlet;
+#X obj 519 31 inlet;
+#X obj 519 55 speedlim 100;
+#X obj 519 79 outlet;
+#X connect 0 0 1 0;
+#X connect 1 0 2 0;
+#X connect 3 0 4 0;
+#X connect 4 0 5 0;
+#X connect 6 0 7 0;
+#X connect 7 0 8 0;
+#X connect 9 0 10 0;
+#X connect 10 0 11 0;
+#X connect 12 0 13 0;
+#X connect 13 0 14 0;
+#X connect 15 0 16 0;
+#X connect 16 0 17 0;
+#X restore 29 173 pd speed-limiting-to-save-cpu------------------------
+;
+#X text 30 24 Analog Inputs of the Arduino-Board:;
+#X text 119 96 <- enable analog inputs;
+#X text 25 283 NOTE: connect the analog pins that you don't use to
+the ground \, if you want to avoid flickering of the values !;
+#X connect 0 0 1 0;
+#X connect 1 0 3 0;
+#X connect 2 0 1 1;
+#X connect 3 0 10 0;
+#X connect 3 1 10 1;
+#X connect 3 2 10 2;
+#X connect 3 3 10 3;
+#X connect 3 4 10 4;
+#X connect 3 5 10 5;
+#X connect 10 0 4 0;
+#X connect 10 1 5 0;
+#X connect 10 2 6 0;
+#X connect 10 3 7 0;
+#X connect 10 4 8 0;
+#X connect 10 5 9 0;
+#X restore 75 452 pd ANALOG-INPUT;
+#N canvas 462 492 550 366 ANALOG-OUTPUT-PWM 0;
+#X text 16 17 Analog Output \, PWM (Pulse Width Modulation);
+#X text 16 53 With the help of PWM you can write analog values to the
+pins 9 \, 10 \, 11 of your Arduino board.;
+#X text 17 89 NOTE: don't forget to set the pins to output mode first
+!;
+#X msg 21 189 pwm 9 \$1;
+#X obj 24 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6
+1 10 -260818 -1 -1 0 1;
+#X msg 31 234 pwm 9 off;
+#X obj 21 258 s \$0-arduino;
+#X text 29 215 disable PWM:;
+#X obj 192 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
+-6 1 10 -260818 -1 -1 0 1;
+#X obj 189 258 s \$0-arduino;
+#X text 197 215 disable PWM:;
+#X obj 354 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
+-6 1 10 -260818 -1 -1 0 1;
+#X obj 351 258 s \$0-arduino;
+#X text 359 215 disable PWM:;
+#X text 21 133 PIN9:;
+#X text 189 135 PIN10:;
+#X text 351 135 PIN11:;
+#X msg 189 189 pwm 10 \$1;
+#X msg 199 234 pwm 10 off;
+#X msg 351 189 pwm 11 \$1;
+#X msg 361 234 pwm 11 off;
+#X text 21 319 NOTE: it is possible to write as well on the other pins
+to send software-PWM signals (will come soon ...);
+#X connect 3 0 6 0;
+#X connect 4 0 3 0;
+#X connect 5 0 6 0;
+#X connect 8 0 17 0;
+#X connect 11 0 19 0;
+#X connect 17 0 9 0;
+#X connect 18 0 9 0;
+#X connect 19 0 12 0;
+#X connect 20 0 12 0;
+#X restore 40 477 pd ANALOG-OUTPUT-PWM;
+#X text 25 357 With the Arduino-Board you can do digital and analog
+input and output \, as descriped in the following sub-patches:;
+#X text 191 427 <- example of Digital Output;
+#X text 191 405 <- example of Digital Input;
+#X text 191 453 <- example of Analog Input;
+#X text 191 478 <- example of Analog Output;
+#X text 259 30 Arduino Interface For PD;
+#X text 286 4 ::::_PDUINO_::::;
+#X text 458 547 2006 \, released under GNU GPL \; Gerda Strobl \, Georg
+Holzmann;
+#X text 86 259 <- list devices;
+#X obj 484 87 spigot;
+#X obj 515 65 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0
+1;
+#X obj 271 324 send \$0-arduino;
+#X obj 344 111 send \$0-arduino-out;
+#X obj 344 67 receive \$0-arduino;
+#X obj 26 280 send \$0-arduino;
+#N canvas 0 22 458 308 GETTING-INFO 0;
+#X msg 147 65 version;
+#X msg 207 65 info;
+#X obj 147 107 send \$0-arduino-out;
+#X obj 146 146 receive \$0-arduino;
+#X obj 146 177 route version;
+#X obj 105 221 unpack 0 0;
+#X floatatom 105 245 5 0 0 0 - - -;
+#X floatatom 170 245 5 0 0 0 - - -;
+#X connect 0 0 2 0;
+#X connect 1 0 2 0;
+#X connect 3 0 4 0;
+#X connect 4 0 5 0;
+#X connect 5 0 6 0;
+#X connect 5 1 7 0;
+#X restore 75 501 pd GETTING-INFO;
+#X text 191 502 <- example of getting status data;
+#N canvas 0 22 463 265 SWITCHING-INPUTS 0;
+#X obj 78 197 send \$0-arduino;
+#X text 25 32 how many analogIns to enable:;
+#X obj 161 99 tgl 15 1 empty empty empty 0 -6 0 8 -257472 -1 -1 0 1
+;
+#X text 184 98 enable/disable digitalIns;
+#X msg 161 117 digitalIns \$1;
+#X msg 26 78 analogIns 0;
+#N canvas 162 133 570 420 serin 0;
+#X obj 165 61 cnv 15 15 15 empty \$0-analog-number-canvas 0 4 8 0 14
+-233017 -1 0;
+#X obj 60 61 hradio 15 1 1 7 empty empty empty 0 -6 0 8 -225280 -1
+-1 0;
+#X obj 60 13 inlet;
+#X msg 200 202 label \$1;
+#X obj 200 180 makefilename %d;
+#X obj 59 108 int;
+#X obj 200 225 send \$0-analog-number-canvas;
+#X obj 59 337 outlet;
+#X msg 60 210 analogIns \$1;
+#X msg 201 306 set \$1 \$2;
+#X obj 59 266 trigger bang anything;
+#X obj 201 286 list;
+#X connect 1 0 5 0;
+#X connect 2 0 1 0;
+#X connect 3 0 6 0;
+#X connect 4 0 3 0;
+#X connect 5 0 4 0;
+#X connect 5 0 8 0;
+#X connect 8 0 10 0;
+#X connect 9 0 7 0;
+#X connect 10 0 7 0;
+#X connect 10 1 11 0;
+#X connect 11 0 9 0;
+#X coords 0 -1 1 1 121 17 1 60 60;
+#X restore 26 49 pd serin;
+#X connect 2 0 4 0;
+#X connect 4 0 0 0;
+#X connect 5 0 0 0;
+#X connect 6 0 5 0;
+#X restore 47 526 pd SWITCHING-INPUTS;
+#X obj 484 111 print STATUS;
+#X text 191 526 <- example of switching inputs on and off;
+#X msg 353 297 digital 13 \$1;
+#X obj 353 279 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
+1;
+#X text 454 295 toggle pin 13 on and off;
+#X obj 344 90 arduino 1;
+#X connect 2 0 3 0;
+#X connect 2 0 4 0;
+#X connect 3 0 47 0;
+#X connect 5 0 47 0;
+#X connect 6 0 47 0;
+#X connect 11 0 27 1;
+#X connect 12 0 27 2;
+#X connect 13 0 27 3;
+#X connect 14 0 27 4;
+#X connect 15 0 27 5;
+#X connect 16 0 27 6;
+#X connect 17 0 27 7;
+#X connect 18 0 27 8;
+#X connect 19 0 27 9;
+#X connect 20 0 27 10;
+#X connect 21 0 27 11;
+#X connect 22 0 27 12;
+#X connect 23 0 27 13;
+#X connect 24 0 23 0;
+#X connect 24 0 22 0;
+#X connect 24 0 21 0;
+#X connect 24 0 20 0;
+#X connect 24 0 19 0;
+#X connect 24 0 18 0;
+#X connect 24 0 17 0;
+#X connect 24 0 16 0;
+#X connect 24 0 15 0;
+#X connect 24 0 14 0;
+#X connect 24 0 13 0;
+#X connect 24 0 12 0;
+#X connect 24 0 11 0;
+#X connect 24 0 26 0;
+#X connect 26 0 27 0;
+#X connect 27 0 44 0;
+#X connect 28 0 44 0;
+#X connect 42 0 51 0;
+#X connect 43 0 42 1;
+#X connect 46 0 56 0;
+#X connect 53 0 44 0;
+#X connect 54 0 53 0;
+#X connect 56 0 45 0;
+#X connect 56 1 42 0;
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-29 12:26:17 +0000