1 files changed, 0 insertions, 71 deletions
diff --git a/examples/Pd_Input/Pd_Input.pde b/examples/Pd_Input/Pd_Input.pde
deleted file mode 100644
index c2d574f..0000000
--- a/examples/Pd_Input/Pd_Input.pde
+++ /dev/null
@@ -1,71 +0,0 @@
-/* Pd_Input
- * ------------------
- *
- * This program reads all of the Analog and 12 Digital Inputs
- * and sends the data to the computer as fast as possible.  
- * It reads one analog pin and two digital pins per cycle 
- * so that the time between reads on all pins remains 
- * constant.
- *
- * It was designed to work with the Pd patch of the same 
- * name in:  Help -> Browser -> examples -> hardware
- *
- * (cleft) 2006 Hans-Christoph Steiner
- * @author: Hans-Christoph Steiner
- * @date: 2006-03-10
- * @location: Polytechnic University, Brooklyn, New York, USA
- */
-
-/*
- * CAUTION!! Do not turn on the Serial Monitor, it could freeze 
- * your computer with this firmware running!  It outputs data 
- * without a delay() so its very fast.
- */
-    
-int i;
-int analogPin = 0;
-int digitalPin = 0;
-int ledOut = 1;
-int analogData = 0;
-int digitalData = 0;
-int digitalOutputByte = 0;
-void setup() {
-  beginSerial(9600);
-}
-
-void loop() {
-  /*
-   * get two digital ins
-   */ 
-  digitalOutputByte = 0;
-  for(i=0;i<7;++i)
-  {
-    digitalData = digitalRead(i);
-    digitalOutputByte = digitalOutputByte + (2^(i+1)*digitalData);
-  }
-  printByte(digitalOutputByte);
-  digitalOutputByte = 0;
-  for(i=7;i<13;++i)
-  {
-    digitalData = digitalRead(i);
-    digitalOutputByte = digitalOutputByte + (2^(i-6)*digitalData);
-  }
-  printByte(digitalOutputByte);
-  /*
-   * get analog in
-   */
-  analogData = analogRead(analogPin);
-  // these two bytes get converted back into the whole number in Pd
-  printByte(analogData / 32);  // div by 32 for the big byte
-  printByte(analogData % 32);  // mod by 32 for the small byte
-  analogPin = analogPin + 1;
-  if (analogPin > 5)
-  {
-    analogPin = 0;
-    // toggle the status LED (pin 13)
-    digitalWrite(13,ledOut);
-    ledOut = !ledOut;  // alternate the LED
-    // the newline (ASCII 10) marks the start/end of the sequence
-    printByte(255);   
-  }  
-}