aboutsummaryrefslogtreecommitdiff
path: root/externals/gridflow/devices4ruby
diff options
context:
space:
mode:
Diffstat (limited to 'externals/gridflow/devices4ruby')
-rw-r--r--externals/gridflow/devices4ruby/ChangeLog12
-rw-r--r--externals/gridflow/devices4ruby/ParallelPort.rb72
-rw-r--r--externals/gridflow/devices4ruby/README27
-rw-r--r--externals/gridflow/devices4ruby/SoundMixer.rb152
-rw-r--r--externals/gridflow/devices4ruby/SoundPCM.rb102
-rw-r--r--externals/gridflow/devices4ruby/extconf.rb112
-rw-r--r--externals/gridflow/devices4ruby/ioctl.rb66
7 files changed, 0 insertions, 543 deletions
diff --git a/externals/gridflow/devices4ruby/ChangeLog b/externals/gridflow/devices4ruby/ChangeLog
deleted file mode 100644
index eb64908f..00000000
--- a/externals/gridflow/devices4ruby/ChangeLog
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: ChangeLog,v 1.1 2005-10-04 02:12:44 matju Exp $ */
-
-version 0.1.1 (2002.07.29):
- * module Linux::SoundDSP renamed to Linux::SoundPCM (with alias)
- * added installer (ruby extconf.rb && make install)
-
-version 0.1 (2001.06.28):
- * added module IoctlClass, Ioctl
- * added module Linux::SoundDSP (4 accessors)
- * added module Linux::SoundMixer (25 accessors)
- * added module Linux::ParallelPort (2 readers, 2 writers)
-
diff --git a/externals/gridflow/devices4ruby/ParallelPort.rb b/externals/gridflow/devices4ruby/ParallelPort.rb
deleted file mode 100644
index 10188592..00000000
--- a/externals/gridflow/devices4ruby/ParallelPort.rb
+++ /dev/null
@@ -1,72 +0,0 @@
-require "linux/ioctl"
-# Copyright (c) 2001, 2003 by Mathieu Bouchard
-# this is published under the Ruby license
-
-=begin
- if using a DB-25 female connector as found on a PC,
- then the pin numbering is like:
- 13 _____ 1
- 25 \___/ 14
-
- 1 = STROBE = the clock line is a square wave, often at 9600 Hz,
- which determines the data rate in usual circumstances.
- 2..9 = D0..D7 = the eight ordinary data bits
- 10 = -ACK (status bit 6 ?)
- 11 = BUSY (status bit 7)
- 12 = PAPER_END (status bit 5)
- 13 = SELECT (status bit 4 ?)
- 14 = -AUTOFD
- 15 = -ERROR (status bit 3 ?)
- 16 = -INIT
- 17 = -SELECT_IN
- 18..25 = GROUND
-=end
-
-module Linux; module ParallelPort
- extend IoctlClass
-
- @port_flags = %w[
- LP_EXIST
- LP_SELEC
- LP_BUSY
- LP_OFFL
- LP_NOPA
- LP_ERR
- LP_ABORT
- LP_CAREFUL
- LP_ABORTOPEN
- LP_TRUST_IRQ
- ]
-
- @port_status = %w[
- nil,
- nil,
- nil,
- LP_PERRORP # unchanged input, active low
- LP_PSELECD # unchanged input, active high
- LP_POUTPA # unchanged input, active high
- LP_PACK # unchanged input, active low
- LP_PBUSY # inverted input, active high
- ]
-
- LPCHAR = 0x0601
- LPTIME = 0x0602
- LPABORT = 0x0604
- LPSETIRQ = 0x0605
- LPGETIRQ = 0x0606
- LPWAIT = 0x0608
- LPCAREFUL = 0x0609 # obsoleted??? wtf?
- LPABORTOPEN = 0x060a
- LPGETSTATUS = 0x060b # return LP_S(minor)
- LPRESET = 0x060c # reset printer
- LPGETSTATS = 0x060d # struct lp_stats (most likely turned off)
- LPGETFLAGS = 0x060e # get status flags
- LPTRUSTIRQ = 0x060f # set/unset the LP_TRUST_IRQ flag
-
- ioctl_reader :port_flags , :LPGETFLAGS
- ioctl_reader :port_status, :LPGETSTATUS
- ioctl_writer :port_careful,:LPCAREFUL
- ioctl_writer :port_char, :LPCHAR
-
-end end
-
diff --git a/externals/gridflow/devices4ruby/README b/externals/gridflow/devices4ruby/README
deleted file mode 100644
index 740b5165..00000000
--- a/externals/gridflow/devices4ruby/README
+++ /dev/null
@@ -1,27 +0,0 @@
-devices/linux
-
-AUTHOR
-
- Mathieu Bouchard <matju@sympatico.ca>
- irc: irc.openprojects.net / #ruby-lang / matju
- (note: I can't read Japanese; write in French or English please)
-
-OVERVIEW
-
-This is a collection of simple modules that you extend IO objects with, to
-give them support for specific devices. For example:
-
- require "linux/SoundMixer"
- f = File.open "/dev/mixer"
- f.extend Linux::SoundMixer
-
- # f now has special accessors for driver variables, e.g:
-
- f.treble = left_speaker_percent + 256 * right_speaker_percent
-
-The modules are made of automatically generated methods, much like Ruby's
-accessors. those generators are called ioctl_reader, ioctl_writer,
-ioctl_accessor. Writing expects an integer in -2**31...2**31; reading will
-return the same. You may browse the source to find out which accessors are
-available, and it's easy to add support for more features.
-
diff --git a/externals/gridflow/devices4ruby/SoundMixer.rb b/externals/gridflow/devices4ruby/SoundMixer.rb
deleted file mode 100644
index 0ae50b60..00000000
--- a/externals/gridflow/devices4ruby/SoundMixer.rb
+++ /dev/null
@@ -1,152 +0,0 @@
-require "linux/ioctl"
-
-module Linux; module SoundMixer
- extend IoctlClass
-
- MIXER_NRDEVICES = 0x00000019
- MIXER_VOLUME = 0x00000000
- MIXER_BASS = 0x00000001
- MIXER_TREBLE = 0x00000002
- MIXER_SYNTH = 0x00000003
- MIXER_PCM = 0x00000004
- MIXER_SPEAKER = 0x00000005
- MIXER_LINE = 0x00000006
- MIXER_MIC = 0x00000007
- MIXER_CD = 0x00000008
- MIXER_IMIX = 0x00000009
- MIXER_ALTPCM = 0x0000000a
- MIXER_RECLEV = 0x0000000b
- MIXER_IGAIN = 0x0000000c
- MIXER_OGAIN = 0x0000000d
- MIXER_LINE1 = 0x0000000e
- MIXER_LINE2 = 0x0000000f
- MIXER_LINE3 = 0x00000010
- MIXER_DIGITAL1 = 0x00000011
- MIXER_DIGITAL2 = 0x00000012
- MIXER_DIGITAL3 = 0x00000013
- MIXER_PHONEIN = 0x00000014
- MIXER_PHONEOUT = 0x00000015
- MIXER_VIDEO = 0x00000016
- MIXER_RADIO = 0x00000017
- MIXER_MONITOR = 0x00000018
- ONOFF_MIN = 0x0000001c
- ONOFF_MAX = 0x0000001e
- MIXER_NONE = 0x0000001f
- MIXER_ENHANCE = 0x0000001f
- MIXER_MUTE = 0x0000001f
- MIXER_LOUD = 0x0000001f
- MIXER_RECSRC = 0x000000ff
- MIXER_DEVMASK = 0x000000fe
- MIXER_RECMASK = 0x000000fd
- MIXER_CAPS = 0x000000fc
- MIXER_STEREODEVS = 0x000000fb
- MIXER_OUTSRC = 0x000000fa
- MIXER_OUTMASK = 0x000000f9
- MASK_VOLUME = 0x00000001
- MASK_BASS = 0x00000002
- MASK_TREBLE = 0x00000004
- MASK_SYNTH = 0x00000008
- MASK_PCM = 0x00000010
- MASK_SPEAKER = 0x00000020
- MASK_LINE = 0x00000040
- MASK_MIC = 0x00000080
- MASK_CD = 0x00000100
- MASK_IMIX = 0x00000200
- MASK_ALTPCM = 0x00000400
- MASK_RECLEV = 0x00000800
- MASK_IGAIN = 0x00001000
- MASK_OGAIN = 0x00002000
- MASK_LINE1 = 0x00004000
- MASK_LINE2 = 0x00008000
- MASK_LINE3 = 0x00010000
- MASK_DIGITAL1 = 0x00020000
- MASK_DIGITAL2 = 0x00040000
- MASK_DIGITAL3 = 0x00080000
- MASK_PHONEIN = 0x00100000
- MASK_PHONEOUT = 0x00200000
- MASK_RADIO = 0x00800000
- MASK_VIDEO = 0x00400000
- MASK_MONITOR = 0x01000000
- MASK_MUTE = 0x80000000
- MASK_ENHANCE = 0x80000000
- MASK_LOUD = 0x80000000
- MIXER_READ_VOLUME = 0x80044d00
- MIXER_READ_BASS = 0x80044d01
- MIXER_READ_TREBLE = 0x80044d02
- MIXER_READ_SYNTH = 0x80044d03
- MIXER_READ_PCM = 0x80044d04
- MIXER_READ_SPEAKER = 0x80044d05
- MIXER_READ_LINE = 0x80044d06
- MIXER_READ_MIC = 0x80044d07
- MIXER_READ_CD = 0x80044d08
- MIXER_READ_IMIX = 0x80044d09
- MIXER_READ_ALTPCM = 0x80044d0a
- MIXER_READ_RECLEV = 0x80044d0b
- MIXER_READ_IGAIN = 0x80044d0c
- MIXER_READ_OGAIN = 0x80044d0d
- MIXER_READ_LINE1 = 0x80044d0e
- MIXER_READ_LINE2 = 0x80044d0f
- MIXER_READ_LINE3 = 0x80044d10
- MIXER_READ_MUTE = 0x80044d1f
- MIXER_READ_ENHANCE = 0x80044d1f
- MIXER_READ_LOUD = 0x80044d1f
- MIXER_READ_RECSRC = 0x80044dff
- MIXER_READ_DEVMASK = 0x80044dfe
- MIXER_READ_RECMASK = 0x80044dfd
- MIXER_READ_STEREODEVS = 0x80044dfb
- MIXER_READ_CAPS = 0x80044dfc
- MIXER_WRITE_VOLUME = 0xc0044d00
- MIXER_WRITE_BASS = 0xc0044d01
- MIXER_WRITE_TREBLE = 0xc0044d02
- MIXER_WRITE_SYNTH = 0xc0044d03
- MIXER_WRITE_PCM = 0xc0044d04
- MIXER_WRITE_SPEAKER = 0xc0044d05
- MIXER_WRITE_LINE = 0xc0044d06
- MIXER_WRITE_MIC = 0xc0044d07
- MIXER_WRITE_CD = 0xc0044d08
- MIXER_WRITE_IMIX = 0xc0044d09
- MIXER_WRITE_ALTPCM = 0xc0044d0a
- MIXER_WRITE_RECLEV = 0xc0044d0b
- MIXER_WRITE_IGAIN = 0xc0044d0c
- MIXER_WRITE_OGAIN = 0xc0044d0d
- MIXER_WRITE_LINE1 = 0xc0044d0e
- MIXER_WRITE_LINE2 = 0xc0044d0f
- MIXER_WRITE_LINE3 = 0xc0044d10
- MIXER_WRITE_MUTE = 0xc0044d1f
- MIXER_WRITE_ENHANCE = 0xc0044d1f
- MIXER_WRITE_LOUD = 0xc0044d1f
- MIXER_WRITE_RECSRC = 0xc0044dff
- MIXER_INFO = 0x805c4d65
- MIXER_ACCESS = 0xc0804d66
- MIXER_AGC = 0xc0044d67
- MIXER_3DSE = 0xc0044d68
- MIXER_PRIVATE1 = 0xc0044d6f
- MIXER_PRIVATE2 = 0xc0044d70
- MIXER_PRIVATE3 = 0xc0044d71
- MIXER_PRIVATE4 = 0xc0044d72
- MIXER_PRIVATE5 = 0xc0044d73
- MIXER_GETLEVELS = 0xc0a44d74
- MIXER_SETLEVELS = 0xc0a44d75
-
- DEVICE_LABELS = [
- "Vol ", "Bass ", "Trebl", "Synth", "Pcm ",
- "Spkr ","Line ", "Mic ", "CD ", "Mix ",
- "Pcm2 ","Rec ", "IGain", "OGain",
- "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3",
- "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"
- ]
-
- DEVICE_NAMES = [
- "vol", "bass", "treble", "synth", "pcm", "speaker", "line",
- "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain",
- "line1", "line2", "line3", "dig1", "dig2", "dig3",
- "phin", "phout", "video", "radio", "monitor"
- ]
-
- DEVICE_NAMES.each_with_index {|name,i|
- ioctl_accessor name,
- MIXER_READ_VOLUME+i,
- MIXER_WRITE_VOLUME+i
- }
-
-end end
diff --git a/externals/gridflow/devices4ruby/SoundPCM.rb b/externals/gridflow/devices4ruby/SoundPCM.rb
deleted file mode 100644
index d1b97159..00000000
--- a/externals/gridflow/devices4ruby/SoundPCM.rb
+++ /dev/null
@@ -1,102 +0,0 @@
-# $Id: SoundPCM.rb,v 1.1 2005-10-04 02:02:14 matju Exp $
-require "linux/ioctl"
-
-module Linux
-
-module SoundPCM
- extend IoctlClass
-
- # SNDCTL Kernel Procedure Numbers
-
- SEQ_RESET = 0x00005100
- SEQ_SYNC = 0x00005101
- SEQ_CTRLRATE = 0xc0045103
- SEQ_GETOUTCOUNT = 0x80045104
- SEQ_GETINCOUNT = 0x80045105
- SEQ_PERCMODE = 0x40045106
- SEQ_TESTMIDI = 0x40045108
- SEQ_RESETSAMPLES = 0x40045109
- SEQ_NRSYNTHS = 0x8004510a
- SEQ_NRMIDIS = 0x8004510b
- SEQ_THRESHOLD = 0x4004510d
- SEQ_PANIC = 0x00005111
- SEQ_OUTOFBAND = 0x40085112
- SEQ_GETTIME = 0x80045113
-
- SYNTH_INFO = 0xc08c5102
- SYNTH_MEMAVL = 0xc004510e
- SYNTH_ID = 0xc08c5114
- SYNTH_CONTROL = 0xcfa45115
- SYNTH_REMOVESAMPLE = 0xc00c5116
-
- FM_LOAD_INSTR = 0x40285107
- FM_4OP_ENABLE = 0x4004510f
-
- TMR_TIMEBASE = 0xc0045401
- TMR_START = 0x00005402
- TMR_STOP = 0x00005403
- TMR_CONTINUE = 0x00005404
- TMR_TEMPO = 0xc0045405
- TMR_SOURCE = 0xc0045406
- TMR_METRONOME = 0x40045407
- TMR_SELECT = 0x40045408
-
- MIDI_INFO = 0xc074510c
- MIDI_PRETIME = 0xc0046d00
- MIDI_MPUMODE = 0xc0046d01
- MIDI_MPUCMD = 0xc0216d02
-
- # DSP_* names are obsolete ?
- DSP_STEREO = 0xc0045003
- DSP_GETBLKSIZE = 0xc0045004
- DSP_SETDUPLEX = 0x00005016
- DSP_GETODELAY = 0x80045017
- DSP_PROFILE = 0x40045017
-
- # what is this?
- COPR_RESET = 0x00004300
- COPR_LOAD = 0xcfb04301
- COPR_RDATA = 0xc0144302
- COPR_RCODE = 0xc0144303
- COPR_WDATA = 0x40144304
- COPR_WCODE = 0x40144305
- COPR_RUN = 0xc0144306
- COPR_HALT = 0xc0144307
- COPR_SENDMSG = 0xcfa44308
- COPR_RCVMSG = 0x8fa44309
-
- # SOUND_PCM Kernel Procedure Numbers
-
- PCM_READ_BITS , PCM_WRITE_BITS = 0x80045005, 0xc0045005
- PCM_READ_CHANNELS , PCM_WRITE_CHANNELS = 0x80045006, 0xc0045006
- PCM_READ_FILTER , PCM_WRITE_FILTER = 0x80045007, 0xc0045007
- PCM_READ_RATE , PCM_WRITE_RATE = 0x80045002, 0xc0045002
-
- PCM_RESET = 0x00005000
- PCM_SYNC = 0x00005001
- PCM_POST = 0x00005008
- PCM_SUBDIVIDE = 0xc0045009
- PCM_SETFRAGMENT = 0xc004500a
- PCM_GETFMTS = 0x8004500b
- PCM_SETFMT = 0xc0045005
- PCM_GETOSPACE = 0x8010500c
- PCM_GETISPACE = 0x8010500d
- PCM_NONBLOCK = 0x0000500e
- PCM_GETCAPS = 0x8004500f
- PCM_GETTRIGGER , PCM_SETTRIGGER = 0x80045010, 0x40045010
- PCM_SETSYNCRO = 0x00005015
- PCM_GETIPTR = 0x800c5011
- PCM_GETOPTR = 0x800c5012
- PCM_MAPINBUF = 0x80085013
- PCM_MAPOUTBUF = 0x80085014
-
- ioctl_accessor :bits , :PCM_READ_BITS , :PCM_WRITE_BITS
- ioctl_accessor :channels, :PCM_READ_CHANNELS, :PCM_WRITE_CHANNELS
- ioctl_accessor :filter , :PCM_READ_FILTER , :PCM_WRITE_FILTER
- ioctl_accessor :rate , :PCM_READ_RATE , :PCM_WRITE_RATE
-end
-
-# backward compatibility
-SoundDSP = SoundPCM
-
-end # Linux
diff --git a/externals/gridflow/devices4ruby/extconf.rb b/externals/gridflow/devices4ruby/extconf.rb
deleted file mode 100644
index 9e49cbdc..00000000
--- a/externals/gridflow/devices4ruby/extconf.rb
+++ /dev/null
@@ -1,112 +0,0 @@
-#!/usr/bin/env ruby
-# $Id: extconf.rb,v 1.1 2005-10-04 02:02:14 matju Exp $
-# installer for RubyX11 / MetaRuby / etc
-# by Mathieu Bouchard
-
-require "rbconfig"
-require "ftools"
-include Config
-
-$DESTDIR = "#{CONFIG["sitedir"]}/#{CONFIG["MAJOR"]}.#{CONFIG["MINOR"]}"
-#$DESTDIR = "/home/matju/lib/ruby/#{RUBY_VERSION[0,3]}"
-$RUBY = "ruby"
-
-while ARGV.length>0
- arg=ARGV.shift
- case arg
- when /=/
- i=arg.index '='
- ARGV.unshift arg[0..i-1], arg[i+1..-1]
- when "--prefix"
- $DESTDIR = ARGV.shift + "/lib/ruby/#{CONFIG["MAJOR"]}.#{CONFIG["MINOR"]}"
- end
-end
-
-
-
-def install_files(f,base,entries)
- entries.each {|type,name,*rest|
- case type
- when :ruby
- f.puts "\tinstall -m644 #{base+name} $(DESTDIR)/#{base+name}"
- when :directory
- f.puts "\t@mkdir $(DESTDIR)/#{base+name} || true"
- install_files(f,base+name,rest)
- end
- }
-end
-
-def uninstall_files(f,base,entries)
- entries.each {|type,name,*rest|
- case type
- when :ruby
- f.puts "\trm $(DESTDIR)/#{base+name}"
- when :directory
- uninstall_files(f,base+name,rest)
- end
- }
-end
-
-def make_makefile
- File.open("Makefile","w") {|f|
- f.puts "# Warning: this file is GENERATED by ./extconf.rb", ""
- f.puts "DESTDIR = #{$DESTDIR}", ""
- f.puts "RUBY = #{$RUBY}"
- f.puts "all::", ""
- f.puts "Makefile: extconf.rb"
- f.puts "\t$(RUBY) extconf.rb", ""
-
- f.puts "install::"
- f.puts "\t@mkdir -p $(DESTDIR)"
- install_files(f,"",FILES)
- f.puts
- f.puts "uninstall::"
- uninstall_files(f,"",FILES)
- f.puts
- }
- #FILES.each {|name|
- # File.install "lib/#{name}", "#{DSTPATH}/#{name}", 0644, true
- #end
-end
-
-#----------------------------------------------------------------#
-
-$DESTDIR += "/linux/" #(HACK!)
-
-FILES = [
-# [:directory, "linux/",
- [:ruby, "ioctl.rb"],
- [:ruby, "SoundPCM.rb"],
- [:ruby, "ParallelPort.rb"],
- [:ruby, "SoundMixer.rb"],
-# ]
-]
-
-make_makefile
-
-
-__END__
-### the following is discarded (just a test)
-
-require "mkmf"
-
-srcs = %w(
- termios
-)
-
-#have_library("m")
-#have_func("sincos")
-#have_func("asinh")
-
-#if have_header("fftw.h")
-# if have_library("fftw", "fftwnd_create_plan")
-# srcs.push "na_fftw"
-# else
-# $defs.delete "-DHAVE_FFTW_H"
-# end
-#end
-
-$objs = srcs.map {|i| i+".o"}
-
-#dir_config("linux")
-create_makefile("linux")
diff --git a/externals/gridflow/devices4ruby/ioctl.rb b/externals/gridflow/devices4ruby/ioctl.rb
deleted file mode 100644
index 100d138d..00000000
--- a/externals/gridflow/devices4ruby/ioctl.rb
+++ /dev/null
@@ -1,66 +0,0 @@
-# general-purpose code for performing
-# less-than-trivial IOCTL operations.
-# note that this is quite hackish
-# but is still better than writing actual C code.
-
-module Linux; DEVICES_VERSION = "0.1.1"; end
-
-module IoctlClass
- def ioctl_reader(sym,cmd_in)
- module_eval %{def #{sym}
- ioctl_intp_in(#{cmd_in})
- end}
- end
- def ioctl_writer(sym,cmd_out)
- module_eval %{def #{sym}=(v)
- ioctl_intp_out(#{cmd_out},v)
- #{sym} if respond_to? :#{sym}
- end}
- end
- def ioctl_accessor(sym,cmd_in,cmd_out)
- ioctl_reader(sym,cmd_in)
- ioctl_writer(sym,cmd_out)
- end
-end
-
-module Ioctl
- # this method is not used anymore
- def int_from_4(foo)
- # if it crashes, just insert foo=foo.reverse here.
- (foo[0]+0x100*foo[1])+0x10000*(foo[2]+0x100*foo[3])
- end
-
-# this was a big hack (from hell) that i used until I actually
-# learned the other feature of ioctl().
-=begin
- def ioctl_intp_out(arg1,arg2)
- tmp = arg2 + 2**32
- foo = [2*tmp.id + 16].pack("l").unpack("P4")[0]
- tmp_ptr = int_from_4(foo)
-# STDOUT.printf "tmp_ptr=%x\n", tmp_ptr
- ioctl(arg1,tmp_ptr)
- end
-
- def ioctl_intp_in(arg1)
- tmp = 0xdeadbeef + 2**32
- foo = [2*tmp.id + 16].pack("l").unpack("P4")[0]
- tmp_ptr = int_from_4(foo)
-# tmp_ptr = foo.unpack("l")[0]
-# STDOUT.printf "tmp_ptr=%x\n", tmp_ptr
- ioctl(arg1,tmp_ptr)
- tmp & (2**32-1)
- end
-=end
-
- def ioctl_intp_out(arg1,arg2)
- ioctl(arg1,[arg2].pack("l"))
- end
-
- def ioctl_intp_in(arg1)
- ioctl(arg1,s="blah")
- return s.unpack("l")[0]
- end
-
-end
-
-class IO; include Ioctl; end
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-25 17:32:26 +0000