From a1fb215b39535805aa19608185d5e52c0f524b42 Mon Sep 17 00:00:00 2001 From: "N.N." Date: Sun, 18 Oct 2009 19:53:53 +0000 Subject: bye gridflow 0.9.4 svn path=/trunk/; revision=12610 --- .../doc/flow_classes/parallel_port-help.pd | 78 ---------------------- 1 file changed, 78 deletions(-) delete mode 100644 externals/gridflow/doc/flow_classes/parallel_port-help.pd (limited to 'externals/gridflow/doc/flow_classes/parallel_port-help.pd') diff --git a/externals/gridflow/doc/flow_classes/parallel_port-help.pd b/externals/gridflow/doc/flow_classes/parallel_port-help.pd deleted file mode 100644 index d871515d..00000000 --- a/externals/gridflow/doc/flow_classes/parallel_port-help.pd +++ /dev/null @@ -1,78 +0,0 @@ -#N canvas 0 27 742 490 10; -#X floatatom 47 380 5 0 0 0 - - -; -#X floatatom 121 348 5 0 0 0 - - -; -#X floatatom 196 323 5 0 0 0 - - -; -#X obj 47 34 tgl 15 0 empty empty empty 17 7 0 10 -24198 -1 -1 0 1 -; -#X text 420 278 * my system resets the owner of the printer port to -'root.lp' so I need to issue as root 'chown myuser.lp'; -#X text 421 37 * you will need : a paper clip (or a 'high tech' solid -core 22-18 awg wire) an led a button; -#X text 422 238 * consult http://en.wikipedia.org/wiki/Parallel_Port -for the pinouts + more; -#X text 425 357 7 6 5 4 3 2 1 0 bit number; -#X text 425 371 9 8 7 6 5 4 3 2 pin number; -#X text 424 331 layout of bit to pin numbers; -#X text 67 33 <-- This will send a 0 or a 1 to the first pin; -#X text 421 145 2 connect the led between pins 2 (Data0) and 23 (GND) -; -#X text 421 87 1 break the paper clip in two and connect pin 11 (Busy) -to pin 24 (GND) and pin 12 (Paper-Out) to 25 (GND). Those pins are -normally 1 and grounding them opens the port for messages.; -#X text 113 228 Will accept values from 0-255; -#X obj 1 -37 cnv 15 840 18 empty empty empty 20 12 0 14 -228992 -66577 -0; -#X text 722 -36 GridFlow 0.9.0; -#X obj 47 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 1 -; -#X obj 69 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 1 -; -#X obj 91 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 1 -; -#X obj 113 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 -1; -#X obj 136 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 -1; -#X obj 158 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 -1; -#X obj 180 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 -1; -#X obj 203 132 tgl 15 0 empty empty empty 0 -6 0 8 -260818 -1 -1 0 -1; -#X obj 47 229 nbx 5 14 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 10 --241291 -1 -1 0 256; -#X obj 47 191 #fold +; -#X obj 47 210 #export; -#X obj 47 172 # << (0 1 2 3 4 5 6 7); -#X obj 47 153 #pack 8 \, \, \, \, \, \, \, \, \, \, \, \, \, \, \, -\,; -#X text 206 293 takes the port as argument; -#X text 93 379 <-- reserved for future use; -#X text 44 -1 The cheapest digital i/o interface; -#X text 238 322 <-- parallel port flags; -#X text 419 188 3 connect a button between pin 10 and 22 (GND); -#X text 163 348 <-- status (pin 10); -#X obj 47 293 parallel_port /dev/lp0; -#X obj 47 63 metro 1; -#X text 425 402 Flags : PERRORP (active low) \, PSELECD (active high) -\, POUTPA (active high) \, PACK (active low) \, PBUSY (active high) -; -#X obj 11 -37 parallel_port /dev/someport; -#X connect 3 0 36 0; -#X connect 16 0 28 0; -#X connect 17 0 28 1; -#X connect 18 0 28 2; -#X connect 19 0 28 3; -#X connect 20 0 28 4; -#X connect 21 0 28 5; -#X connect 22 0 28 6; -#X connect 23 0 28 7; -#X connect 24 0 35 0; -#X connect 25 0 26 0; -#X connect 26 0 24 0; -#X connect 27 0 25 0; -#X connect 28 0 27 0; -#X connect 35 0 0 0; -#X connect 35 1 1 0; -#X connect 35 2 2 0; -#X connect 36 0 16 0; -- cgit v1.2.1