cleaned up build system, especially for Darwin/MacOS X

svn path=/trunk/externals/OSCx/; revision=1549

22 files changed, 3431 insertions, 892 deletions

diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..d2fccf5
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,25 @@
+Copyright © 1998. The Regents of the University of California (Regents). 
+All Rights Reserved.
+
+Written by Matt Wright, The Center for New Music and Audio Technologies,
+University of California, Berkeley.
+
+Permission to use, copy, modify, distribute, and distribute modified versions
+of this software and its documentation without fee and without a signed
+licensing agreement, is hereby granted, provided that the above copyright
+notice, this paragraph and the following two paragraphs appear in all copies,
+modifications, and distributions.
+
+IN NO EVENT SHALL REGENTS BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
+SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, ARISING
+OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF REGENTS HAS
+BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+REGENTS SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE SOFTWARE AND ACCOMPANYING DOCUMENTATION, IF ANY, PROVIDED
+HEREUNDER IS PROVIDED "AS IS". REGENTS HAS NO OBLIGATION TO PROVIDE
+MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+
+The OpenSound Control WWW page is 
+    http://www.cnmat.berkeley.edu/OpenSoundControl
diff --git a/Makefile.in b/Makefile.in
index 4a627a9..5abb7ae 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -5,11 +5,17 @@ all:
 	cd send+dump ; make
 	cd src ; make
 
-install:
+install: all
 	cd src ; make install
 
 clean:
-	cd  libOSC && make clean
+	cd libOSC && make clean
 	cd send+dump && make clean
 	cd src && make clean
 
+distclean: clean
+	-rm *~
+	rm Makefile */Makefile
+	rm config.log config.status config.h
+	-rm -Rf ./autom4te.cache/ extra
+
diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..dff9e48
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1317 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+#   Free Software Foundation, Inc.
+
+timestamp='2001-09-04'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script.
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int dummy(){}" > $dummy.c ;
+	for c in cc gcc c89 ; do
+	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
+	  if test $? = 0 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	rm -f $dummy.c $dummy.o $dummy.rel ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# Netbsd (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	# Determine the machine/vendor (is the vendor relevant).
+	case "${UNAME_MACHINE}" in
+	    amiga) machine=m68k-unknown ;;
+	    arm32) machine=arm-unknown ;;
+	    atari*) machine=m68k-atari ;;
+	    sun3*) machine=m68k-sun ;;
+	    mac68k) machine=m68k-apple ;;
+	    macppc) machine=powerpc-apple ;;
+	    hp3[0-9][05]) machine=m68k-hp ;;
+	    ibmrt|romp-ibm) machine=romp-ibm ;;
+	    *) machine=${UNAME_MACHINE}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE}" in
+	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit 0 ;;
+    alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	cat <<EOF >$dummy.s
+	.data
+\$Lformat:
+	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+	.text
+	.globl main
+	.align 4
+	.ent main
+main:
+	.frame \$30,16,\$26,0
+	ldgp \$29,0(\$27)
+	.prologue 1
+	.long 0x47e03d80 # implver \$0
+	lda \$2,-1
+	.long 0x47e20c21 # amask \$2,\$1
+	lda \$16,\$Lformat
+	mov \$0,\$17
+	not \$1,\$18
+	jsr \$26,printf
+	ldgp \$29,0(\$26)
+	mov 0,\$16
+	jsr \$26,exit
+	.end main
+EOF
+	eval $set_cc_for_build
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+			2-1307)
+				UNAME_MACHINE="alphaev68"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit 0;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sparc*:NetBSD:*)
+	echo `uname -p`-unknown-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+              case "${HPUX_REV}" in
+                11.[0-9][0-9])
+                  if [ -x /usr/bin/getconf ]; then
+                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+                        esac ;;
+                    esac
+                  fi ;;
+              esac
+              if [ "${HP_ARCH}" = "" ]; then
+	      eval $set_cc_for_build
+              sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+	    (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+	    rm -f $dummy.c $dummy
+	fi ;;
+	esac
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3D:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i386-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit 0 ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux
+	exit 0 ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    mips:Linux:*:*)
+	case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
+	  big)    echo mips-unknown-linux-gnu && exit 0 ;;
+	  little) echo mipsel-unknown-linux-gnu && exit 0 ;;
+	esac
+	;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit 0 ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit 0 ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit 0 ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit 0 ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit 0 ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit 0 ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit 0 ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	ld_supported_targets=`cd /; ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0 ;;		
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0 ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit 0 ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-pc-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-pc-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-pc-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-pc-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i*86:*:5:[78]*)
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit 0 ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Darwin:*:*)
+	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+	exit 0 ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	if test "${UNAME_MACHINE}" = "x86pc"; then
+		UNAME_MACHINE=pc
+	fi
+	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit 0 ;;
+    NSR-[KW]:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit 0 ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit 0 ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit 0 ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit 0 ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit 0 ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit 0 ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit 0 ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit 0 ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit 0 ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit 0 ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit 0 ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit 0 ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+    ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..393f13d
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1411 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+#   Free Software Foundation, Inc.
+
+timestamp='2001-09-07'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit 0;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| c4x | clipper \
+	| d10v | d30v | dsp16xx \
+	| fr30 \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| m32r | m68000 | m68k | m88k | mcore \
+	| mips16 | mips64 | mips64el | mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el | mips64vr4300 \
+	| mips64vr4300el | mips64vr5000 | mips64vr5000el \
+	| mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
+	| mipsisa32 \
+	| mn10200 | mn10300 \
+	| ns16k | ns32k \
+	| openrisc \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| s390 | s390x \
+	| sh | sh[34] | sh[34]eb | shbe | shle \
+	| sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
+	| stormy16 | strongarm \
+	| tahoe | thumb | tic80 | tron \
+	| v850 \
+	| we32k \
+	| x86 | xscale \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alphapca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armv*-* \
+	| bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c54x-* \
+	| clipper-* | cray2-* | cydra-* \
+	| d10v-* | d30v-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| m32r-* \
+	| m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | mcore-* \
+	| mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
+	| mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
+	| mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| s390-* | s390x-* \
+	| sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
+	| sparc-* | sparc64-* | sparc86x-* | sparclite-* \
+	| sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
+	| t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
+	| v850-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	cray2)
+		basic_machine=cray2-cray
+		os=-unicos
+		;;
+	[cjt]90)
+		basic_machine=${basic_machine}-cray
+		os=-unicos
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	mmix*)
+		basic_machine=mmix-knuth
+		os=-mmixware
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+        pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2)
+		basic_machine=i686-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+	        ;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+	        ;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+	        ;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+	        ;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sparclite-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=t3e-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	windows32)
+		basic_machine=i386-pc
+		os=-windows32-msvcrt
+		;;
+	xmp)
+		basic_machine=xmp-cray
+		os=-unicos
+		;;
+        xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	mips)
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh3 | sh4 | sh3eb | sh4eb)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv9 | sparcv9b)
+		basic_machine=sparc-sun
+		;;
+        cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto*)
+		os=-nto-qnx
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-ns2 )
+	        os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+	        os=-mint
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	pdp10-*)
+		os=-tops20
+		;;
+        pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+        *-gould)
+		os=-sysv
+		;;
+        *-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+        *-sgi)
+		os=-irix
+		;;
+        *-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-vxsim* | -vxworks*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/configure b/configure
index a61591f..bfae3e0 100755
--- a/configure
+++ b/configure
@@ -1,10 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.58 for OSCxpd 0.2.
+# Generated by GNU Autoconf 2.57 for OSCxpd 0.2.
 #
 # Report bugs to <jdl@xdv.org>.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -21,10 +22,9 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
   as_unset=unset
 else
   as_unset=false
@@ -43,7 +43,7 @@ for as_var in \
   LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
   LC_TELEPHONE LC_TIME
 do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
     $as_unset $as_var
@@ -220,17 +220,16 @@ rm -f conf$$ conf$$.exe conf$$.file
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
 else
-  test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
 
 # Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
 
 
 # IFS
@@ -311,7 +310,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LN_S CPP EGREP LIBOBJS pd_suffix INCLUDES LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LN_S CPP build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LIBOBJS pd_suffix INCLUDES LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -670,7 +669,7 @@ done
 
 # Be sure to have absolute paths.
 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+              localstatedir libdir includedir oldincludedir infodir mandir
 do
   eval ac_val=$`echo $ac_var`
   case $ac_val in
@@ -710,10 +709,10 @@ if test -z "$srcdir"; then
   # Try the directory containing this script, then its parent.
   ac_confdir=`(dirname "$0") 2>/dev/null ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+         X"$0" : 'X\(//\)[^/]' \| \
+         X"$0" : 'X\(//\)$' \| \
+         X"$0" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
 echo X"$0" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
   	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -805,9 +804,9 @@ _ACEOF
   cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -832,6 +831,10 @@ Fine tuning of the installation directories:
 _ACEOF
 
   cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
 _ACEOF
 fi
 
@@ -892,42 +895,12 @@ case $srcdir in
     ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
     ac_top_srcdir=$ac_top_builddir$srcdir ;;
 esac
-case "$ac_dir" in
-.) ac_abs_builddir=$ac_builddir;;
-*)
-  case $ac_builddir in
-  .) ac_abs_builddir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir=$ac_builddir;;
-  *) ac_abs_builddir="$ac_dir"/$ac_builddir;;
-  esac;;
-esac
-case "$ac_dir" in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir="$ac_dir"/${ac_top_builddir}.;;
-  esac;;
-esac
-case "$ac_dir" in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir="$ac_dir"/$ac_srcdir;;
-  esac;;
-esac
-case "$ac_dir" in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir="$ac_dir"/$ac_top_srcdir;;
-  esac;;
-esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
     cd $ac_dir
     # Check for guested configure; otherwise get Cygnus style configure.
@@ -938,13 +911,13 @@ esac
       echo
       $SHELL $ac_srcdir/configure  --help=recursive
     elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
+           test -f $ac_srcdir/configure.in; then
       echo
       $ac_configure --help
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi
-    cd "$ac_popdir"
+    cd $ac_popdir
   done
 fi
 
@@ -952,9 +925,10 @@ test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
 OSCxpd configure 0.2
-generated by GNU Autoconf 2.58
+generated by GNU Autoconf 2.57
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -966,7 +940,7 @@ This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by OSCxpd $as_me 0.2, which was
-generated by GNU Autoconf 2.58.  Invocation command line was
+generated by GNU Autoconf 2.57.  Invocation command line was
 
   $ $0 $@
 
@@ -1043,19 +1017,19 @@ do
     2)
       ac_configure_args1="$ac_configure_args1 '$ac_arg'"
       if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
+        ac_must_keep_next=false # Got value, back to normal.
       else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
+        case $ac_arg in
+          *=* | --config-cache | -C | -disable-* | --disable-* \
+          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+          | -with-* | --with-* | -without-* | --without-* | --x)
+            case "$ac_configure_args0 " in
+              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+            esac
+            ;;
+          -* ) ac_must_keep_next=true ;;
+        esac
       fi
       ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
       # Get rid of the leading space.
@@ -1089,12 +1063,12 @@ _ASBOX
     case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
     *ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
       ;;
     *)
       sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
       ;;
     esac;
 }
@@ -1123,7 +1097,7 @@ _ASBOX
       for ac_var in $ac_subst_files
       do
 	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+        echo "$ac_var='"'"'$ac_val'"'"'"
       done | sort
       echo
     fi
@@ -1142,7 +1116,7 @@ _ASBOX
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
+  rm -f core core.* *.core &&
   rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
      ' 0
@@ -1222,7 +1196,7 @@ fi
 # value.
 ac_cache_corrupted=false
 for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
   eval ac_old_val="\$ac_cv_env_${ac_var}_value"
@@ -1239,13 +1213,13 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
 echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
 echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+        ac_cache_corrupted=:
       fi;;
   esac
   # Pass precious variables to config.status.
@@ -1642,6 +1616,7 @@ ac_compiler=`set X $ac_compile; echo $2`
   (exit $ac_status); }
 
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -1661,8 +1636,8 @@ ac_clean_files="$ac_clean_files a.out a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+echo "$as_me:$LINENO: checking for C compiler default output" >&5
+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
   (eval $ac_link_default) 2>&5
@@ -1682,23 +1657,23 @@ do
   test -f "$ac_file" || continue
   case $ac_file in
     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
+        ;;
     conftest.$ac_ext )
-	# This is the source file.
-	;;
+        # This is the source file.
+        ;;
     [ab].out )
-	# We found the default executable, but exeext='' is most
-	# certainly right.
-	break;;
+        # We found the default executable, but exeext='' is most
+        # certainly right.
+        break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
-	break;;
+        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+        # FIXME: I believe we export ac_cv_exeext for Libtool,
+        # but it would be cool to find out if it's true.  Does anybody
+        # maintain Libtool? --akim.
+        export ac_cv_exeext
+        break;;
     * )
-	break;;
+        break;;
   esac
 done
 else
@@ -1772,8 +1747,8 @@ for ac_file in conftest.exe conftest conftest.*; do
   case $ac_file in
     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
-	  break;;
+          export ac_cv_exeext
+          break;;
     * ) break;;
   esac
 done
@@ -1798,6 +1773,7 @@ if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -1848,6 +1824,7 @@ if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -1867,21 +1844,11 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -1894,7 +1861,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
@@ -1910,6 +1877,7 @@ if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -1926,21 +1894,11 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -1953,7 +1911,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_prog_cc_g=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
@@ -1980,6 +1938,7 @@ else
   ac_cv_prog_cc_stdc=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2007,16 +1966,6 @@ static char *f (char * (*g) (char **, int), char **p, ...)
   va_end (v);
   return s;
 }
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -2043,21 +1992,11 @@ do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2070,7 +2009,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.err conftest.$ac_objext
+rm -f conftest.$ac_objext
 done
 rm -f conftest.$ac_ext conftest.$ac_objext
 CC=$ac_save_CC
@@ -2098,28 +2037,19 @@ cat >conftest.$ac_ext <<_ACEOF
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
   for ac_declaration in \
-   '' \
+   ''\
+   '#include <stdlib.h>' \
    'extern "C" void std::exit (int) throw (); using std::exit;' \
    'extern "C" void std::exit (int); using std::exit;' \
    'extern "C" void exit (int) throw ();' \
@@ -2127,13 +2057,14 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
    'void exit (int);'
 do
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-$ac_declaration
 #include <stdlib.h>
+$ac_declaration
 int
 main ()
 {
@@ -2144,21 +2075,11 @@ exit (42);
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2171,8 +2092,9 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 continue
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2189,21 +2111,11 @@ exit (42);
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2215,7 +2127,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 done
 rm -f conftest*
 if test -n "$ac_declaration"; then
@@ -2229,7 +2141,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2276,6 +2188,7 @@ do
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2286,7 +2199,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 #else
 # include <assert.h>
 #endif
-		     Syntax error
+                     Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -2298,7 +2211,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -2319,6 +2231,7 @@ rm -f conftest.err conftest.$ac_ext
   # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2336,7 +2249,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -2383,6 +2295,7 @@ do
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2393,7 +2306,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 #else
 # include <assert.h>
 #endif
-		     Syntax error
+                     Syntax error
 _ACEOF
 if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
@@ -2405,7 +2318,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -2426,6 +2338,7 @@ rm -f conftest.err conftest.$ac_ext
   # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2443,7 +2356,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -2490,7 +2402,85 @@ echo "default flags"
 echo cflags "$CFLAGS"
 echo ldflags "$LDFLAGS"
 
-# AC_CANONICAL_HOST
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
 
 # Checks for libraries.
 # FIXME: Replace `main' with a function in `-lc':
@@ -2504,6 +2494,7 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lc  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2521,21 +2512,11 @@ main ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+  (eval $ac_link) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
+         { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2548,8 +2529,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_c_main=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_c_main" >&5
@@ -2573,6 +2553,7 @@ else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lm  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2590,21 +2571,11 @@ main ();
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+  (eval $ac_link) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
+         { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2617,8 +2588,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_lib_m_main=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
 echo "$as_me:$LINENO: result: $ac_cv_lib_m_main" >&5
@@ -2656,6 +2626,7 @@ if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2676,21 +2647,11 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2703,11 +2664,12 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2729,6 +2691,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2753,6 +2716,7 @@ if test $ac_cv_header_stdc = yes; then
   :
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2764,9 +2728,9 @@ cat >>conftest.$ac_ext <<_ACEOF
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
 #else
 # define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
+                   (('a' <= (c) && (c) <= 'i') \
+                     || ('j' <= (c) && (c) <= 'r') \
+                     || ('s' <= (c) && (c) <= 'z'))
 # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
 #endif
 
@@ -2777,7 +2741,7 @@ main ()
   int i;
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
+        || toupper (i) != TOUPPER (i))
       exit(2);
   exit (0);
 }
@@ -2802,7 +2766,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 fi
@@ -2827,7 +2791,7 @@ fi
 
 
 for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
+                  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
 echo "$as_me:$LINENO: checking for $ac_header" >&5
@@ -2836,6 +2800,7 @@ if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2847,21 +2812,11 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2874,7 +2829,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -2917,6 +2872,7 @@ else
 echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2927,21 +2883,11 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2954,7 +2900,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
 echo "${ECHO_T}$ac_header_compiler" >&6
 
@@ -2962,6 +2908,7 @@ echo "${ECHO_T}$ac_header_compiler" >&6
 echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2979,7 +2926,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -2999,32 +2945,33 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
 echo "${ECHO_T}$ac_header_preproc" >&6
 
 # So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
     ;;
-  no:yes:* )
+  no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
     (
       cat <<\_ASBOX
-## -------------------------- ##
-## Report this to jdl@xdv.org ##
-## -------------------------- ##
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
 _ASBOX
     ) |
       sed "s/^/$as_me: WARNING:     /" >&2
@@ -3035,7 +2982,7 @@ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
 if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  eval "$as_ac_Header=$ac_header_preproc"
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -3058,6 +3005,7 @@ if test "${ac_cv_header_stdbool_h+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3084,17 +3032,17 @@ cat >>conftest.$ac_ext <<_ACEOF
 # error __bool_true_false_are_defined is not defined
 #endif
 
-	struct s { _Bool s: 1; _Bool t; } s;
+        struct s { _Bool s: 1; _Bool t; } s;
 
-	char a[true == 1 ? 1 : -1];
-	char b[false == 0 ? 1 : -1];
-	char c[__bool_true_false_are_defined == 1 ? 1 : -1];
-	char d[(bool) -0.5 == true ? 1 : -1];
-	bool e = &s;
-	char f[(_Bool) -0.0 == false ? 1 : -1];
-	char g[true];
-	char h[sizeof (_Bool)];
-	char i[sizeof s.t];
+        char a[true == 1 ? 1 : -1];
+        char b[false == 0 ? 1 : -1];
+        char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+        char d[(bool) -0.5 == true ? 1 : -1];
+        bool e = &s;
+        char f[(_Bool) -0.0 == false ? 1 : -1];
+        char g[true];
+        char h[sizeof (_Bool)];
+        char i[sizeof s.t];
 
 int
 main ()
@@ -3106,21 +3054,11 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3133,7 +3071,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_header_stdbool_h=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
 echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6
@@ -3143,6 +3081,7 @@ if test "${ac_cv_type__Bool+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3162,21 +3101,11 @@ if (sizeof (_Bool))
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3189,7 +3118,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_type__Bool=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
 echo "${ECHO_T}$ac_cv_type__Bool" >&6
@@ -3216,6 +3145,7 @@ if test "${ac_cv_c_const+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3278,21 +3208,11 @@ main ()
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3305,7 +3225,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_c_const=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
 echo "${ECHO_T}$ac_cv_c_const" >&6
@@ -3323,6 +3243,7 @@ if test "${ac_cv_header_time+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3343,21 +3264,11 @@ return 0;
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3370,7 +3281,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_header_time=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
 echo "${ECHO_T}$ac_cv_header_time" >&6
@@ -3388,6 +3299,7 @@ if test "${ac_cv_type_size_t+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3407,21 +3319,11 @@ if (sizeof (size_t))
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3434,7 +3336,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_type_size_t=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
 echo "${ECHO_T}$ac_cv_type_size_t" >&6
@@ -3467,6 +3369,7 @@ else
 echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3477,21 +3380,11 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3504,7 +3397,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
 echo "${ECHO_T}$ac_header_compiler" >&6
 
@@ -3512,6 +3405,7 @@ echo "${ECHO_T}$ac_header_compiler" >&6
 echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3529,7 +3423,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3549,32 +3442,33 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
 echo "${ECHO_T}$ac_header_preproc" >&6
 
 # So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
     ;;
-  no:yes:* )
+  no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
     (
       cat <<\_ASBOX
-## -------------------------- ##
-## Report this to jdl@xdv.org ##
-## -------------------------- ##
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
 _ASBOX
     ) |
       sed "s/^/$as_me: WARNING:     /" >&2
@@ -3585,7 +3479,7 @@ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
 if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  eval "$as_ac_Header=$ac_header_preproc"
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -3609,6 +3503,7 @@ else
   ac_cv_func_malloc_0_nonnull=no
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3648,7 +3543,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_func_malloc_0_nonnull=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
@@ -3664,14 +3559,7 @@ else
 #define HAVE_MALLOC 0
 _ACEOF
 
-   case $LIBOBJS in
-    "malloc.$ac_objext"   | \
-  *" malloc.$ac_objext"   | \
-    "malloc.$ac_objext "* | \
-  *" malloc.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;;
-esac
-
+   LIBOBJS="$LIBOBJS malloc.$ac_objext"
 
 cat >>confdefs.h <<\_ACEOF
 #define malloc rpl_malloc
@@ -3699,6 +3587,7 @@ else
 echo "$as_me:$LINENO: checking $ac_header usability" >&5
 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3709,21 +3598,11 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3736,7 +3615,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
 echo "${ECHO_T}$ac_header_compiler" >&6
 
@@ -3744,6 +3623,7 @@ echo "${ECHO_T}$ac_header_compiler" >&6
 echo "$as_me:$LINENO: checking $ac_header presence" >&5
 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3761,7 +3641,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -3781,32 +3660,33 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
 echo "${ECHO_T}$ac_header_preproc" >&6
 
 # So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
     { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
     ;;
-  no:yes:* )
+  no:yes )
     { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
     (
       cat <<\_ASBOX
-## -------------------------- ##
-## Report this to jdl@xdv.org ##
-## -------------------------- ##
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
 _ASBOX
     ) |
       sed "s/^/$as_me: WARNING:     /" >&2
@@ -3817,7 +3697,7 @@ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
 if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  eval "$as_ac_Header=$ac_header_preproc"
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
@@ -3841,6 +3721,7 @@ else
  for ac_arg1 in 'int' 'size_t' 'unsigned long' 'unsigned'; do
   for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do
    cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3858,29 +3739,19 @@ int
 main ()
 {
 extern int select ($ac_arg1,
-					    $ac_arg234, $ac_arg234, $ac_arg234,
-					    $ac_arg5);
+                                            $ac_arg234, $ac_arg234, $ac_arg234,
+                                            $ac_arg5);
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3892,7 +3763,7 @@ else
 sed 's/^/| /' conftest.$ac_ext >&5
 
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
   done
  done
 done
@@ -3933,28 +3804,21 @@ if eval "test \"\${$as_ac_var+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func (); below.
     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
     <limits.h> exists even on freestanding compilers.  */
-
 #ifdef __STDC__
 # include <limits.h>
 #else
 # include <assert.h>
 #endif
-
-#undef $ac_func
-
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
@@ -3985,21 +3849,11 @@ return f != $ac_func;
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+  (eval $ac_link) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
+         { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4012,8 +3866,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 eval "$as_ac_var=no"
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
@@ -4028,28 +3881,21 @@ if test "${ac_cv_func__doprnt+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define _doprnt innocuous__doprnt
-
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char _doprnt (); below.
     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
     <limits.h> exists even on freestanding compilers.  */
-
 #ifdef __STDC__
 # include <limits.h>
 #else
 # include <assert.h>
 #endif
-
-#undef _doprnt
-
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
@@ -4080,21 +3926,11 @@ return f != _doprnt;
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+  (eval $ac_link) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
+         { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4107,8 +3943,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_func__doprnt=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
 echo "${ECHO_T}$ac_cv_func__doprnt" >&6
@@ -4139,28 +3974,21 @@ if eval "test \"\${$as_ac_var+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func (); below.
     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
     <limits.h> exists even on freestanding compilers.  */
-
 #ifdef __STDC__
 # include <limits.h>
 #else
 # include <assert.h>
 #endif
-
-#undef $ac_func
-
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
@@ -4191,21 +4019,11 @@ return f != $ac_func;
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+  (eval $ac_link) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
+         { ac_try='test -s conftest$ac_exeext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4218,8 +4036,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 eval "$as_ac_var=no"
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
@@ -4237,6 +4054,7 @@ if test "${ac_cv_type_signal+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4263,21 +4081,11 @@ int i;
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4290,7 +4098,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_cv_type_signal=int
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 fi
 echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
 echo "${ECHO_T}$ac_cv_type_signal" >&6
@@ -4304,7 +4112,7 @@ _ACEOF
 # from augusts template
 
 
-INCLUDES="-I../libOSC"
+INCLUDES="-I../libOSC -I../../../pd/src"
 LDFLAGS="$LDFLAGS -L/usr/local/lib -ldl"
 if test -z "$GCC"; then
         case $host in
@@ -4343,9 +4151,9 @@ else
 		echo "YOU HAVE A SPARC STATION,	not setting any flags, not supported yet"
 		;;
         *-*-darwin*)
-                CFLAGS="$CPFLAGS -DUNIX -DMACOSX -Wall -Wimplicit -Wunused -Wmissing-prototypes -O3 "
-		# LDFLAGS="$LDFLAGS -bundle -bundle_loader /usr/local/pd/bin/pd -undefined suppress -flat_namespace"
-		LDFLAGS="$LDFLAGS -bundle -bundle_loader /usr/local/pd/bin/pd -flat_namespace"
+                CFLAGS="$CPFLAGS -DUNIX -Wall -Wimplicit -Wunused -Wmissing-prototypes -O3 "
+		# LDFLAGS="$LDFLAGS -bundle -bundle_loader ../../../pd/bin/pd -undefined suppress -flat_namespace"
+		LDFLAGS="$LDFLAGS -bundle -bundle_loader ../../../pd/bin/pd -flat_namespace"
 		pd_suffix=pd_darwin
 		;;
         *)
@@ -4389,6 +4197,7 @@ else
 echo "$as_me:$LINENO: checking m_pd.h usability" >&5
 echo $ECHO_N "checking m_pd.h usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4399,21 +4208,11 @@ $ac_includes_default
 _ACEOF
 rm -f conftest.$ac_objext
 if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
+         { ac_try='test -s conftest.$ac_objext'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4426,7 +4225,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_objext conftest.$ac_ext
 echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
 echo "${ECHO_T}$ac_header_compiler" >&6
 
@@ -4434,6 +4233,7 @@ echo "${ECHO_T}$ac_header_compiler" >&6
 echo "$as_me:$LINENO: checking m_pd.h presence" >&5
 echo $ECHO_N "checking m_pd.h presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4451,7 +4251,6 @@ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
   (exit $ac_status); } >/dev/null; then
   if test -s conftest.err; then
     ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
   else
     ac_cpp_err=
   fi
@@ -4471,32 +4270,33 @@ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
 echo "${ECHO_T}$ac_header_preproc" >&6
 
 # So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
     { echo "$as_me:$LINENO: WARNING: m_pd.h: accepted by the compiler, rejected by the preprocessor!" >&5
 echo "$as_me: WARNING: m_pd.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: m_pd.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: m_pd.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
+    { echo "$as_me:$LINENO: WARNING: m_pd.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: m_pd.h: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
     ;;
-  no:yes:* )
+  no:yes )
     { echo "$as_me:$LINENO: WARNING: m_pd.h: present but cannot be compiled" >&5
 echo "$as_me: WARNING: m_pd.h: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: m_pd.h:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: m_pd.h:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: m_pd.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: m_pd.h: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: m_pd.h:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: m_pd.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: m_pd.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: m_pd.h: check for missing prerequisite headers?" >&2;}
     { echo "$as_me:$LINENO: WARNING: m_pd.h: proceeding with the preprocessor's result" >&5
 echo "$as_me: WARNING: m_pd.h: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: m_pd.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: m_pd.h: in the future, the compiler will take precedence" >&2;}
     (
       cat <<\_ASBOX
-## -------------------------- ##
-## Report this to jdl@xdv.org ##
-## -------------------------- ##
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
 _ASBOX
     ) |
       sed "s/^/$as_me: WARNING:     /" >&2
@@ -4562,13 +4362,13 @@ _ACEOF
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+        "s/'/'\\\\''/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
       ;;
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
       sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
       ;;
     esac;
 } |
@@ -4598,13 +4398,13 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 # trailing colons and then remove the whole line if VPATH becomes empty
 # (actually we leave an empty line to preserve line numbers).
 if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
 s/:*\$(srcdir):*/:/;
 s/:*\${srcdir}:*/:/;
 s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
+s/^\([^=]*=[ 	]*\):*/\1/;
 s/:*$//;
-s/^[^=]*=[	 ]*$//;
+s/^[^=]*=[ 	]*$//;
 }'
 fi
 
@@ -4615,7 +4415,7 @@ ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
   # 2. Add them.
   ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
   ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
@@ -4659,10 +4459,9 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
   as_unset=unset
 else
   as_unset=false
@@ -4681,7 +4480,7 @@ for as_var in \
   LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
   LC_TELEPHONE LC_TIME
 do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
     $as_unset $as_var
@@ -4860,17 +4659,16 @@ rm -f conf$$ conf$$.exe conf$$.file
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
 else
-  test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
 as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
 
 # Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
 
 
 # IFS
@@ -4897,7 +4695,7 @@ _ASBOX
 cat >&5 <<_CSEOF
 
 This file was extended by OSCxpd $as_me 0.2, which was
-generated by GNU Autoconf 2.58.  Invocation command line was
+generated by GNU Autoconf 2.57.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -4941,9 +4739,9 @@ Usage: $0 [OPTIONS] [FILE]...
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
   --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
+                   instantiate the configuration file FILE
   --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
+                   instantiate the configuration header FILE
 
 Configuration files:
 $config_files
@@ -4957,10 +4755,11 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 OSCxpd config.status 0.2
-configured by $0, generated by GNU Autoconf 2.58,
+configured by $0, generated by GNU Autoconf 2.57,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 srcdir=$srcdir
@@ -5156,6 +4955,14 @@ s,@EXEEXT@,$EXEEXT,;t t
 s,@OBJEXT@,$OBJEXT,;t t
 s,@LN_S@,$LN_S,;t t
 s,@CPP@,$CPP,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
 s,@EGREP@,$EGREP,;t t
 s,@LIBOBJS@,$LIBOBJS,;t t
 s,@pd_suffix@,$pd_suffix,;t t
@@ -5190,9 +4997,9 @@ _ACEOF
       (echo ':t
   /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
       if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
       else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
       fi
       ac_sed_frag=`expr $ac_sed_frag + 1`
       ac_beg=$ac_end
@@ -5210,21 +5017,21 @@ for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
   # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case $ac_file in
   - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
   *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
   * )   ac_file_in=$ac_file.in ;;
   esac
 
   # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
   ac_dir=`(dirname "$ac_file") 2>/dev/null ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
 echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
   	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -5240,10 +5047,10 @@ echo X"$ac_file" |
       as_dirs="$as_dir $as_dirs"
       as_dir=`(dirname "$as_dir") 2>/dev/null ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
 echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
   	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -5281,42 +5088,12 @@ case $srcdir in
     ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
     ac_top_srcdir=$ac_top_builddir$srcdir ;;
 esac
-case "$ac_dir" in
-.) ac_abs_builddir=$ac_builddir;;
-*)
-  case $ac_builddir in
-  .) ac_abs_builddir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir=$ac_builddir;;
-  *) ac_abs_builddir="$ac_dir"/$ac_builddir;;
-  esac;;
-esac
-case "$ac_dir" in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir="$ac_dir"/${ac_top_builddir}.;;
-  esac;;
-esac
-case "$ac_dir" in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir="$ac_dir"/$ac_srcdir;;
-  esac;;
-esac
-case "$ac_dir" in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir="$ac_dir";;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir="$ac_dir"/$ac_top_srcdir;;
-  esac;;
-esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
 
 
 
@@ -5334,7 +5111,7 @@ echo "$as_me: creating $ac_file" >&6;}
     configure_input="$ac_file.  "
   fi
   configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
+                                     sed 's,.*/,,'` by configure."
 
   # First look for the input files in the build tree, otherwise in the
   # src tree.
@@ -5343,24 +5120,24 @@ echo "$as_me: creating $ac_file" >&6;}
       case $f in
       -) echo $tmp/stdin ;;
       [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
 echo "$as_me: error: cannot find input file: $f" >&2;}
    { (exit 1); exit 1; }; }
-	 echo "$f";;
+         echo $f;;
       *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
 echo "$as_me: error: cannot find input file: $f" >&2;}
    { (exit 1); exit 1; }; }
-	 fi;;
+         fi;;
       esac
     done` || { (exit 1); exit 1; }
 _ACEOF
@@ -5401,12 +5178,12 @@ cat >>$CONFIG_STATUS <<\_ACEOF
 # NAME is the cpp macro being defined and VALUE is the value it is being given.
 #
 # ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
+ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='[ 	].*$,\1#\2'
 ac_dC=' '
 ac_dD=',;t'
 # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
+ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
 ac_uB='$,\1#\2define\3'
 ac_uC=' '
 ac_uD=',;t'
@@ -5415,11 +5192,11 @@ for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
   # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case $ac_file in
   - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
   *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
   * )   ac_file_in=$ac_file.in ;;
   esac
 
@@ -5433,29 +5210,28 @@ echo "$as_me: creating $ac_file" >&6;}
       case $f in
       -) echo $tmp/stdin ;;
       [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
 echo "$as_me: error: cannot find input file: $f" >&2;}
    { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
+         echo $f;;
       *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
 echo "$as_me: error: cannot find input file: $f" >&2;}
    { (exit 1); exit 1; }; }
-	 fi;;
+         fi;;
       esac
     done` || { (exit 1); exit 1; }
   # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
+  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in
 
 _ACEOF
 
@@ -5478,9 +5254,9 @@ s/[\\&,]/\\&/g
 s,[\\$`],\\&,g
 t clear
 : clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*\)\(([^)]*)\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
 t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
 : end
 _ACEOF
 # If some macros were called several times there might be several times
@@ -5494,13 +5270,13 @@ rm -f confdef2sed.sed
 # example, in the case of _POSIX_SOURCE, which is predefined and required
 # on some systems where configure will not decide to define it.
 cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
 _ACEOF
 
 # Break up conftest.defines because some shells have a limit on the size
 # of here documents, and old seds have small limits too (100 cmds).
 echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  if grep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
 echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
 echo '  :' >>$CONFIG_STATUS
 rm -f conftest.tail
@@ -5509,7 +5285,7 @@ do
   # Write a limited-size here document to $tmp/defines.sed.
   echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
   # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
+  echo '/^[ 	]*#[ 	]*define/!b' >>$CONFIG_STATUS
   # Work around the forget-to-reset-the-flag bug.
   echo 't clr' >>$CONFIG_STATUS
   echo ': clr' >>$CONFIG_STATUS
@@ -5536,7 +5312,7 @@ do
   # Write a limited-size here document to $tmp/undefs.sed.
   echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
   # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
+  echo '/^[ 	]*#[ 	]*undef/!b' >>$CONFIG_STATUS
   # Work around the forget-to-reset-the-flag bug.
   echo 't clr' >>$CONFIG_STATUS
   echo ': clr' >>$CONFIG_STATUS
@@ -5570,10 +5346,10 @@ echo "$as_me: $ac_file is unchanged" >&6;}
     else
       ac_dir=`(dirname "$ac_file") 2>/dev/null ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
 echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
   	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
@@ -5589,10 +5365,10 @@ echo X"$ac_file" |
       as_dirs="$as_dir $as_dirs"
       as_dir=`(dirname "$as_dir") 2>/dev/null ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
 echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
   	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
diff --git a/configure.ac b/configure.ac
index 3a7e58c..56e1794 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,7 +1,7 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_PREREQ(2.58)
+AC_PREREQ(2.57)
 AC_INIT(OSCxpd, 0.2, jdl@xdv.org)
 AC_CONFIG_SRCDIR([libOSC/OSC-client.h])
 AC_CONFIG_HEADER([config.h])
@@ -28,7 +28,7 @@ dnl ------------------------------------------
 dnl ----  do some magic to gues the host opsys
 dnl ----  taken from libvorbis configure.in
 dnl ------------------------------------------
-# AC_CANONICAL_HOST
+AC_CANONICAL_HOST
 
 # Checks for libraries.
 # FIXME: Replace `main' with a function in `-lc':
@@ -60,7 +60,7 @@ dnl  for each of the *-*-host's in the following, do the checking and then set y
 dnl  CFLAGS get set for C code, CPPFLAGS for c++ code.  LDFLAGS is the linking flags for both c and c++
 dnl ------------------------------------------
 
-INCLUDES="-I../libOSC"
+INCLUDES="-I../libOSC -I../../../pd/src"
 LDFLAGS="$LDFLAGS -L/usr/local/lib -ldl"
 if test -z "$GCC"; then
         case $host in 
@@ -102,9 +102,9 @@ else
 		echo "YOU HAVE A SPARC STATION,	not setting any flags, not supported yet"
 		;;
         *-*-darwin*)
-                CFLAGS="$CPFLAGS -DUNIX -DMACOSX -Wall -Wimplicit -Wunused -Wmissing-prototypes -O3 "
-		# LDFLAGS="$LDFLAGS -bundle -bundle_loader /usr/local/pd/bin/pd -undefined suppress -flat_namespace"
-		LDFLAGS="$LDFLAGS -bundle -bundle_loader /usr/local/pd/bin/pd -flat_namespace"
+                CFLAGS="$CPFLAGS -DUNIX -Wall -Wimplicit -Wunused -Wmissing-prototypes -O3 "
+		# LDFLAGS="$LDFLAGS -bundle -bundle_loader ../../../pd/bin/pd -undefined suppress -flat_namespace"
+		LDFLAGS="$LDFLAGS -bundle -bundle_loader ../../../pd/bin/pd -flat_namespace"
 		pd_suffix=pd_darwin
 		;;
         *)
diff --git a/doc/OSC-help.pd b/doc/OSC-help.pd
index 88ddc52..90c532b 100644
--- a/doc/OSC-help.pd
+++ b/doc/OSC-help.pd
@@ -1,10 +1,10 @@
-#N canvas 608 335 471 304 12;

-#X obj 21 149 sendOSC-help;

-#X obj 21 174 dumpOSC-help;

-#X obj 21 200 OSCroute-help;

-#X obj 17 43 OSC;

-#X msg 17 19 version;

-#X text 15 79 1 click sendOSC-help 2 click connect button 3 randomly

-click the 3 available messages 4 watch console;

-#X text 102 19 version 0.16;

-#X connect 4 0 3 0;

+#N canvas 608 335 565 311 12;
+#X obj 21 149 sendOSC-help;
+#X obj 21 174 dumpOSC-help;
+#X obj 21 200 OSCroute-help;
+#X obj 17 43 OSC;
+#X msg 17 19 version;
+#X text 15 79 1 click sendOSC-help 2 click connect button 3 randomly
+click the 3 available messages 4 watch console;
+#X text 102 19 version 0.16;
+#X connect 4 0 3 0;
diff --git a/doc/OSCroute-help.pd b/doc/OSCroute-help.pd
index a249835..d00336f 100644
--- a/doc/OSCroute-help.pd
+++ b/doc/OSCroute-help.pd
@@ -1,98 +1,98 @@
-#N canvas 112 247 501 357 10;

-#X msg 20 72 version;

-#X obj 86 72 r rcvOSC;

-#X obj 86 109 OSCroute /test /ix /yps;

-#X obj 161 143 print ix;

-#X obj 242 142 print yps;

-#X obj 85 183 OSCroute /bla /bli /blo;

-#X obj 85 212 unpack f f f;

-#X floatatom 85 239 4 0 0 0 - - -;

-#X floatatom 124 239 4 0 0 0 - - -;

-#X floatatom 164 239 4 0 0 0 - - -;

-#X text 20 11 OSCroute works pretty much like route but outputs remainder

-of routing tag after match.;

-#X obj 68 143 print test;

-#X obj 241 212 print rejected;

-#N canvas 663 325 676 351 patternmatching 0;

-#X obj 26 242 OSCroute /freq;

-#X obj 150 242 OSCroute /freq;

-#X obj 272 241 OSCroute /freq;

-#X msg 81 115 /*/freq 23 45 67;

-#X obj 72 201 OSCroute /inst1 /inst2 /inst3;

-#X obj 26 266 unpack f f f;

-#X floatatom 26 287 3 0 0 0 - - -;

-#X floatatom 65 287 3 0 0 0 - - -;

-#X floatatom 105 287 3 0 0 0 - - -;

-#X obj 150 265 unpack f f f;

-#X floatatom 150 286 3 0 0 0 - - -;

-#X floatatom 189 286 3 0 0 0 - - -;

-#X floatatom 229 286 3 0 0 0 - - -;

-#X obj 272 265 unpack f f f;

-#X floatatom 272 286 3 0 0 0 - - -;

-#X floatatom 311 286 3 0 0 0 - - -;

-#X floatatom 351 286 3 0 0 0 - - -;

-#X msg 55 44 /inst1/freq 100 200 300;

-#X msg 64 66 /inst2/freq 111 222 333;

-#X msg 70 88 /inst3/freq 321 432 543;

-#X text 45 116 4->;

-#X text 37 89 3->;

-#X text 30 67 2->;

-#X text 22 45 1->;

-#X text 11 7 took me a while to figure this out \, somehow i always

-thought it should work the other way round:;

-#X msg 96 145 /inst[12]/freq 0 99 88;

-#X msg 119 174 /inst?/freq 22.33 44.55 66.77;

-#X text 367 48 well \, now it does \, crudely:;

-#X obj 375 130 OSCroute /*;

-#X msg 375 80 /test1/data 1 2 3;

-#X msg 401 103 /test2/data 3.4 5 1;

-#X obj 447 157 print rejected;

-#X obj 375 184 print routed;

-#X connect 0 0 5 0;

-#X connect 1 0 9 0;

-#X connect 2 0 13 0;

-#X connect 3 0 4 0;

-#X connect 4 0 0 0;

-#X connect 4 1 1 0;

-#X connect 4 2 2 0;

-#X connect 5 0 6 0;

-#X connect 5 1 7 0;

-#X connect 5 2 8 0;

-#X connect 9 0 10 0;

-#X connect 9 1 11 0;

-#X connect 9 2 12 0;

-#X connect 13 0 14 0;

-#X connect 13 1 15 0;

-#X connect 13 2 16 0;

-#X connect 17 0 4 0;

-#X connect 18 0 4 0;

-#X connect 19 0 4 0;

-#X connect 25 0 4 0;

-#X connect 26 0 4 0;

-#X connect 28 0 32 0;

-#X connect 28 1 31 0;

-#X connect 29 0 28 0;

-#X connect 30 0 28 0;

-#X restore 288 57 pd patternmatching;

-#X text 184 57 check here =>;

-#X text 239 235 last outlet emits all non-matches;

-#X text 252 269 -OSC patterns that didnt match;

-#X text 239 252 (like classic route):;

-#X text 252 280 -patterns not starting with /;

-#X text 252 294 -patterns starting with a number;

-#X text 325 324 2002-09-08 \, jdl xdv.org;

-#X text 28 318 for more info \, get help on:;

-#X obj 195 319 OSC;

-#X connect 0 0 2 0;

-#X connect 1 0 2 0;

-#X connect 2 0 5 0;

-#X connect 2 0 11 0;

-#X connect 2 1 3 0;

-#X connect 2 1 5 0;

-#X connect 2 2 4 0;

-#X connect 2 2 5 0;

-#X connect 5 0 6 0;

-#X connect 5 3 12 0;

-#X connect 6 0 7 0;

-#X connect 6 1 8 0;

-#X connect 6 2 9 0;

+#N canvas 112 247 505 361 10;
+#X msg 20 72 version;
+#X obj 86 72 r rcvOSC;
+#X obj 86 109 OSCroute /test /ix /yps;
+#X obj 161 143 print ix;
+#X obj 242 142 print yps;
+#X obj 85 183 OSCroute /bla /bli /blo;
+#X obj 85 212 unpack f f f;
+#X floatatom 85 239 4 0 0 0 - - -;
+#X floatatom 124 239 4 0 0 0 - - -;
+#X floatatom 164 239 4 0 0 0 - - -;
+#X text 20 11 OSCroute works pretty much like route but outputs remainder
+of routing tag after match.;
+#X obj 68 143 print test;
+#X obj 241 212 print rejected;
+#N canvas 663 325 676 351 patternmatching 0;
+#X obj 26 242 OSCroute /freq;
+#X obj 150 242 OSCroute /freq;
+#X obj 272 241 OSCroute /freq;
+#X msg 81 115 /*/freq 23 45 67;
+#X obj 72 201 OSCroute /inst1 /inst2 /inst3;
+#X obj 26 266 unpack f f f;
+#X floatatom 26 287 3 0 0 0 - - -;
+#X floatatom 65 287 3 0 0 0 - - -;
+#X floatatom 105 287 3 0 0 0 - - -;
+#X obj 150 265 unpack f f f;
+#X floatatom 150 286 3 0 0 0 - - -;
+#X floatatom 189 286 3 0 0 0 - - -;
+#X floatatom 229 286 3 0 0 0 - - -;
+#X obj 272 265 unpack f f f;
+#X floatatom 272 286 3 0 0 0 - - -;
+#X floatatom 311 286 3 0 0 0 - - -;
+#X floatatom 351 286 3 0 0 0 - - -;
+#X msg 55 44 /inst1/freq 100 200 300;
+#X msg 64 66 /inst2/freq 111 222 333;
+#X msg 70 88 /inst3/freq 321 432 543;
+#X text 45 116 4->;
+#X text 37 89 3->;
+#X text 30 67 2->;
+#X text 22 45 1->;
+#X text 11 7 took me a while to figure this out \, somehow i always
+thought it should work the other way round:;
+#X msg 96 145 /inst[12]/freq 0 99 88;
+#X msg 119 174 /inst?/freq 22.33 44.55 66.77;
+#X text 367 48 well \, now it does \, crudely:;
+#X obj 375 130 OSCroute /*;
+#X msg 375 80 /test1/data 1 2 3;
+#X msg 401 103 /test2/data 3.4 5 1;
+#X obj 447 157 print rejected;
+#X obj 375 184 print routed;
+#X connect 0 0 5 0;
+#X connect 1 0 9 0;
+#X connect 2 0 13 0;
+#X connect 3 0 4 0;
+#X connect 4 0 0 0;
+#X connect 4 1 1 0;
+#X connect 4 2 2 0;
+#X connect 5 0 6 0;
+#X connect 5 1 7 0;
+#X connect 5 2 8 0;
+#X connect 9 0 10 0;
+#X connect 9 1 11 0;
+#X connect 9 2 12 0;
+#X connect 13 0 14 0;
+#X connect 13 1 15 0;
+#X connect 13 2 16 0;
+#X connect 17 0 4 0;
+#X connect 18 0 4 0;
+#X connect 19 0 4 0;
+#X connect 25 0 4 0;
+#X connect 26 0 4 0;
+#X connect 28 0 32 0;
+#X connect 28 1 31 0;
+#X connect 29 0 28 0;
+#X connect 30 0 28 0;
+#X restore 288 57 pd patternmatching;
+#X text 184 57 check here =>;
+#X text 239 235 last outlet emits all non-matches;
+#X text 252 269 -OSC patterns that didnt match;
+#X text 239 252 (like classic route):;
+#X text 252 280 -patterns not starting with /;
+#X text 252 294 -patterns starting with a number;
+#X text 325 324 2002-09-08 \, jdl xdv.org;
+#X text 28 318 for more info \, get help on:;
+#X obj 226 317 OSC;
+#X connect 0 0 2 0;
+#X connect 1 0 2 0;
+#X connect 2 0 5 0;
+#X connect 2 0 11 0;
+#X connect 2 1 3 0;
+#X connect 2 1 5 0;
+#X connect 2 2 4 0;
+#X connect 2 2 5 0;
+#X connect 5 0 6 0;
+#X connect 5 3 12 0;
+#X connect 6 0 7 0;
+#X connect 6 1 8 0;
+#X connect 6 2 9 0;
diff --git a/doc/dumpOSC-help.pd b/doc/dumpOSC-help.pd
index 118ac54..30b57a4 100644
--- a/doc/dumpOSC-help.pd
+++ b/doc/dumpOSC-help.pd
@@ -1,10 +1,10 @@
-#N canvas 485 432 465 203 12;

-#X obj 17 105 print rcvOSC;

-#X obj 17 53 dumpOSC 9999;

-#X obj 45 78 s rcvOSC;

-#X text 15 7 dumpOSC listens on specified port / UDP \, outputs everything

-received on its only outlet. seems to be pretty stable.;

-#X obj 417 163 OSC;

-#X text 194 163 for more info \, get help on:;

-#X connect 1 0 0 0;

-#X connect 1 0 2 0;

+#N canvas 485 432 617 212 12;
+#X obj 17 105 print rcvOSC;
+#X obj 17 53 dumpOSC 9999;
+#X obj 45 78 s rcvOSC;
+#X text 15 7 dumpOSC listens on specified port / UDP \, outputs everything
+received on its only outlet. seems to be pretty stable.;
+#X obj 463 163 OSC;
+#X text 194 163 for more info \, get help on:;
+#X connect 1 0 0 0;
+#X connect 1 0 2 0;
diff --git a/doc/sendOSC-help.pd b/doc/sendOSC-help.pd
index 3123fef..f0c92a1 100644
--- a/doc/sendOSC-help.pd
+++ b/doc/sendOSC-help.pd
@@ -1,62 +1,62 @@
-#N canvas 496 472 852 471 10;

-#X obj 59 396 sendOSC;

-#X floatatom 59 423 5 0 0 0 - - -;

-#X msg 44 119 disconnect;

-#X msg 79 163 send /test/bla 1 2 3;

-#X msg 26 93 connect localhost 9999;

-#X msg 91 187 send /ix/bli 4 fuenf 6;

-#X msg 103 211 send /yps/blo 7.8 9.1 zehnkommaelf;

-#X text 8 142 ========================================;

-#X msg 274 92 connect localhost 10001;

-#X msg 149 301 typetags 1;

-#X msg 144 333 typetags 0;

-#X text 475 112 typetags;

-#X text 475 129 sendOSC now by default uses;

-#X text 477 145 typetags.;

-#X text 477 166 dumOSC on the other hand;

-#X text 477 186 should be able to interpret;

-#X text 478 208 this.;

-#X text 474 93 new (or again):;

-#X msg 423 294 [;

-#X msg 423 321 ];

-#X msg 256 249 send /bla 1 2 3 \, send /bli 3 4 5 \, send /blo 4 5

-6;

-#X text 462 312 when last bundle is closed the buffer is sent.;

-#X text 463 333 so: first "[" \, then add messages with send /bla;

-#X text 466 351 open nested nudle etc \, close with "]";

-#X floatatom 113 425 5 0 0 0 - - -;

-#X text 162 428 bundleDepth;

-#X text 24 11 sendOSC: send OSC formatted packet to network. at the

-moment over UDP only is supported.;

-#X text 28 38 supported int \, flot + string.;

-#X text 462 291 open / close bundles here.;

-#X text 465 372 watch the bundleDepth index change while you do this.

-;

-#X text 231 299 switch usage of typetags;

-#X text 232 316 on/off.;

-#X text 231 332 default: on;

-#X text 465 392 MAX_BUNDLE_NESTING: 32;

-#X msg 315 154 send;

-#X msg 315 179 send /;

-#X msg 368 156 send /bang;

-#X msg 265 57 connect 192.168.0.255 5555;

-#X text 462 58 use something like this to broadcast on UDP;

-#X text 607 435 for more info \, get help on:;

-#X obj 774 436 OSC;

-#X connect 0 0 1 0;

-#X connect 0 1 24 0;

-#X connect 2 0 0 0;

-#X connect 3 0 0 0;

-#X connect 4 0 0 0;

-#X connect 5 0 0 0;

-#X connect 6 0 0 0;

-#X connect 8 0 0 0;

-#X connect 9 0 0 0;

-#X connect 10 0 0 0;

-#X connect 18 0 0 0;

-#X connect 19 0 0 0;

-#X connect 20 0 0 0;

-#X connect 34 0 0 0;

-#X connect 35 0 0 0;

-#X connect 36 0 0 0;

-#X connect 37 0 0 0;

+#N canvas 496 472 856 475 10;
+#X obj 59 396 sendOSC;
+#X floatatom 59 423 5 0 0 0 - - -;
+#X msg 44 119 disconnect;
+#X msg 79 163 send /test/bla 1 2 3;
+#X msg 26 93 connect localhost 9999;
+#X msg 91 187 send /ix/bli 4 fuenf 6;
+#X msg 103 211 send /yps/blo 7.8 9.1 zehnkommaelf;
+#X text 8 142 ========================================;
+#X msg 274 92 connect localhost 10001;
+#X msg 149 301 typetags 1;
+#X msg 144 333 typetags 0;
+#X text 475 112 typetags;
+#X text 475 129 sendOSC now by default uses;
+#X text 477 145 typetags.;
+#X text 477 166 dumOSC on the other hand;
+#X text 477 186 should be able to interpret;
+#X text 478 208 this.;
+#X text 474 93 new (or again):;
+#X msg 423 294 [;
+#X msg 423 321 ];
+#X msg 256 249 send /bla 1 2 3 \, send /bli 3 4 5 \, send /blo 4 5
+6;
+#X text 462 312 when last bundle is closed the buffer is sent.;
+#X text 463 333 so: first "[" \, then add messages with send /bla;
+#X text 466 351 open nested nudle etc \, close with "]";
+#X floatatom 113 425 5 0 0 0 - - -;
+#X text 162 428 bundleDepth;
+#X text 24 11 sendOSC: send OSC formatted packet to network. at the
+moment over UDP only is supported.;
+#X text 28 38 supported int \, flot + string.;
+#X text 462 291 open / close bundles here.;
+#X text 465 372 watch the bundleDepth index change while you do this.
+;
+#X text 231 299 switch usage of typetags;
+#X text 232 316 on/off.;
+#X text 231 332 default: on;
+#X text 465 392 MAX_BUNDLE_NESTING: 32;
+#X msg 315 154 send;
+#X msg 315 179 send /;
+#X msg 368 156 send /bang;
+#X msg 265 57 connect 192.168.0.255 5555;
+#X text 462 58 use something like this to broadcast on UDP;
+#X text 607 435 for more info \, get help on:;
+#X obj 798 435 OSC;
+#X connect 0 0 1 0;
+#X connect 0 1 24 0;
+#X connect 2 0 0 0;
+#X connect 3 0 0 0;
+#X connect 4 0 0 0;
+#X connect 5 0 0 0;
+#X connect 6 0 0 0;
+#X connect 8 0 0 0;
+#X connect 9 0 0 0;
+#X connect 10 0 0 0;
+#X connect 18 0 0 0;
+#X connect 19 0 0 0;
+#X connect 20 0 0 0;
+#X connect 34 0 0 0;
+#X connect 35 0 0 0;
+#X connect 36 0 0 0;
+#X connect 37 0 0 0;
diff --git a/install.sh b/install.sh
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/install.sh
diff --git a/libOSC/Makefile.in b/libOSC/Makefile.in
index 26dca72..d67ba88 100644
--- a/libOSC/Makefile.in
+++ b/libOSC/Makefile.in
@@ -1,19 +1,18 @@
-CFLAGS=  -O2 -Wall -fPIC
+#CFLAGS=  -O2 -Wall -fPIC
 ARFLAGS=srv
 # uncomment the following for linux/win
 # DEFS= -Dunix
-# and this for osx
-# DEFS= -Dunix -DMACOSX
 LIB=libOSC.a
 
-CFLAGS= @CFLAGS@
+CFLAGS=@CFLAGS@
+INCLUDES=@INCLUDES@
 
 LIBOBJS= ${LIB}(OSC-client.o) ${LIB}(OSC-timetag.o)
 
 all:	${LIBOBJS}
 
 .c.a:
-	${CC} -c ${CFLAGS} ${DEFS} $<
+	${CC} -c ${CFLAGS} ${INCLUDES} ${DEFS} $<
 	${AR} ${ARFLAGS} $@ $*.o
 	rm -f $*.o
 
diff --git a/libOSC/OSC-client.c b/libOSC/OSC-client.c
index 972aa52..c85d09a 100644
--- a/libOSC/OSC-client.c
+++ b/libOSC/OSC-client.c
@@ -64,7 +64,7 @@ University of California, Berkeley.
 	#include 	<sys/stat.h>

 #endif

 

-#ifdef MACOSX

+#ifdef __APPLE__

   #include <sys/types.h>

 #endif

 

diff --git a/send+dump/Makefile.in b/send+dump/Makefile.in
index 6ff1cf2..2927d63 100644
--- a/send+dump/Makefile.in
+++ b/send+dump/Makefile.in
@@ -2,8 +2,6 @@ LIBOSCDIR = ../libOSC
 LIBOSC = ${LIBOSCDIR}/libOSC.a
 # for eg. linux
 # DEFS= -Dunix
-# for MAC OSX, should be DARWIN
-# DEFS=-Dunix -DMACOSX
 
 CFLAGS= @CFLAGS@
 # INCLUDES= @INCLUDES@
@@ -18,7 +16,7 @@ sendOSC: sendOSC.o htmsocket.o ${LIBOSC}
 
 dumpOSC: ${DUMPOBJS}
 	${CC} ${CFLAGS} $(INCLUDES) -o $@ ${DUMPOBJS}
-	
+
 dumpUDP: dumpUDP.o
 	${CC} ${CFLAGS} $(INCLUDES) -o dumpUDP dumpUDP.o
 
diff --git a/send+dump/dumpOSC.c b/send+dump/dumpOSC.c
index 63efc38..14a0e84 100644
--- a/send+dump/dumpOSC.c
+++ b/send+dump/dumpOSC.c
@@ -83,7 +83,7 @@ Technologies, University of California, Berkeley.
 #include <signal.h>
 #include <grp.h>
 #include <sys/file.h>
-#ifndef MACOSX
+#ifndef __APPLE__
   #include <sys/prctl.h>
   #include <bits/sigset.h>
 #endif
@@ -116,7 +116,9 @@ Boolean ClientReply(int packetsize, void *packet, int socketfd,
 void sgi_CleanExit(void);
 Boolean sgi_HaveToQuit(void);
 int RegisterPollingDevice(int fd, void (*callbackfunction)(int , void *), void *dummy);
+#ifndef __APPLE__
 static void catch_sigint();
+#endif
 static int Synthmessage(char *m, int n, void *clientdesc, int clientdesclength, int fd) ;
 void ParseOSCPacket(char *buf, int n, ClientAddr returnAddr);
 static void Smessage(char *address, void *v, int n, ClientAddr returnAddr);
@@ -232,9 +234,11 @@ int RegisterPollingDevice(int fd, void (*callbackfunction)(int , void *), void *
 
 static int caught_sigint;
 
+#ifndef __APPLE__
 static void catch_sigint()  {
    caught_sigint = 1;
 }
+#endif
 static int sockfd, usockfd;
 
 
@@ -634,7 +638,7 @@ printf("polldev %d\n", polldevs[j].fd);
 		printf("nfds %d\n", nfds);
 */
 		caught_sigint = 0;
-#ifndef MACOSX
+#ifndef __APPLE__
    		sigset(SIGINT, catch_sigint);       /* set sig handler       */
 #endif	
 		while(!caught_sigint)
diff --git a/send+dump/htmsocket.c b/send+dump/htmsocket.c
index 1788cc3..a3e3190 100644
--- a/send+dump/htmsocket.c
+++ b/send+dump/htmsocket.c
@@ -62,7 +62,7 @@ University of California, Berkeley.
 #include <sys/file.h>
 #include <sys/time.h>
 #include <sys/types.h>
-#ifndef MACOSX
+#ifndef __APPLE__
   #include <sys/prctl.h>
 #endif
 
diff --git a/src/Makefile.in b/src/Makefile.in
index f35ba73..5fd81cd 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -9,6 +9,8 @@ DEFS= -Dunix
 
 prefix=$(DESTDIR)/usr
 
+current: @pd_suffix@
+
 # ----------------------- LINUX i386 -----------------------
 
 # pd_linux: $(NAME).pd_linux
@@ -42,12 +44,12 @@ OSCroute.pd_linux: OSCroute.o OSC-pattern-match.o
 
 OSC.pd_linux: OSC.o
 	cc -Wl,-export_dynamic -shared -o $*.@pd_suffix@ $? -lc -lm
-	# $(LD) $(LDFLAGS) -o OSC.$(EXT) *.$(EXT) *.o $(LIBS) $(LIBOSC)
+# $(LD) $(LDFLAGS) -o OSC.$(EXT) *.$(EXT) *.o $(LIBS) $(LIBOSC)
 #	$(LD) $(LDFLAGS) -o OSC.$(EXT) *.$(EXT) $(LIBS) $(LIBOSC)
 $(TARGETS): %.o : %.c
 	cc $(CFLAGS) $(INCLUDE) -c -o $*.o $*.c
 
-	# 	cc -c $(CFLAGS) OSC.c
+# 	cc -c $(CFLAGS) OSC.c
 
 # .c.pd_linux:
 #	cc -O2 -Wall -DPD -fPIC $(LINUXCFLAGS) $(LINUXINCLUDE) -c *.c
@@ -75,20 +77,20 @@ SFX=.pd_darwin
 
 .SUFFIXES: $(SFX)
 
-DARWINCFLAGS = -DPD -DUNIX -DMACOSX -O2 \
+DARWINCFLAGS = -DPD -DUNIX -O2 \
     -Wall -W -Wshadow -Wstrict-prototypes \
     -Wno-unused -Wno-parentheses -Wno-switch
 
 # where is your m_pd.h ???
-DARWININCLUDE =  -I../../../pd/src
+DARWININCLUDE = @INCLUDES@
 
 DARWINEXTERNALS = htmsocket.o OSC-pattern-match.o sendOSC.o dumpOSC.o OSCroute.o
 
 .c.pd_darwin:
 	cc $(DARWINCFLAGS) $(DARWININCLUDE) -c *.c
-	cc -bundle -bundle_loader /usr/local/pd/bin/pd -flat_namespace -o $*.pd_darwin $*.o $(DARWINEXTERNALS) $(LIBS) $(LIBOSC)
+	cc -bundle -bundle_loader ../../../pd/bin/pd -flat_namespace -o $*.pd_darwin $*.o $(DARWINEXTERNALS) $(LIBS) $(LIBOSC)
 
 	rm -f $*.o ../$*.pd_darwin
-	ln -s $*/$*.pd_darwin ..
+#	ln -s $*/$*.pd_darwin ..
 
 
diff --git a/src/OSC-pattern-match.c b/src/OSC-pattern-match.c
index 39dce87..7b04042 100644
--- a/src/OSC-pattern-match.c
+++ b/src/OSC-pattern-match.c
@@ -39,7 +39,7 @@ The OpenSound Control WWW page is
   #include <stdio.h>

 #endif

 

-// #ifdef MACOSX

+// #ifdef __APPLE__

 // #include <stdio.h>

 // #endif

 

diff --git a/src/OSC.c b/src/OSC.c
index 0a8e361..1b94a7f 100644
--- a/src/OSC.c
+++ b/src/OSC.c
@@ -3,7 +3,7 @@
 	pd

 	-------------

 		-- tweaks for Win32    www.zeggz.com/raf	13-April-2002

-

+		-- smoothed out build, clean up for Darwin  <hans@at.or.at> 2004.04.04

 */

 

 #if HAVE_CONFIG_H 

@@ -47,7 +47,8 @@ OSC_API void OSC_version (t_OSC *x) {
   // EnterCallback();

   post("OSC4PD Version " VERSION

        "\n ¯\\    original code by matt wright. pd-fication jdl@xdv.org\n"

-       "   ·   Win32-port raf@interaccess.com\n    \\_ Compiled " __TIME__ " " __DATE__);

+       "   ·   Win32-port raf@interaccess.com    Darwin cleanup hans@at.or.at\n"

+		 "		 \\_ Compiled " __TIME__ " " __DATE__);

   // ExitCallback();

 }

 

diff --git a/src/OSCroute.c b/src/OSCroute.c
index c6df417..f211626 100644
--- a/src/OSCroute.c
+++ b/src/OSCroute.c
@@ -61,7 +61,7 @@ The OpenSound Control WWW page is
 	#include <stdlib.h>

 	#include <string.h>

 #endif

-#ifdef MACOSX

+#ifdef __APPLE__

   #include <stdio.h>

 #endif

 #ifdef UNIX

diff --git a/src/dumpOSC.c b/src/dumpOSC.c
index 4a6fa2e..7a0fcba 100644
--- a/src/dumpOSC.c
+++ b/src/dumpOSC.c
@@ -78,7 +78,7 @@ Technologies, University of California, Berkeley.
 void sys_addpollfn(int fd, t_fdpollfn fn, void *ptr);

 

 

-#if defined(__sgi) || defined(__linux) || defined(WIN32) || defined(MACOSX)

+#if defined(__sgi) || defined(__linux) || defined(WIN32) || defined(__APPLE__)

 

 #ifdef WIN32

 	#include "OSC-common.h"

diff --git a/src/htmsocket.c b/src/htmsocket.c
index 1463d86..b9ba16c 100644
--- a/src/htmsocket.c
+++ b/src/htmsocket.c
@@ -40,7 +40,7 @@ University of California, Berkeley.
 #include <config.h> 

 #endif

 

-#ifdef MACOSX

+#ifdef __APPLE__

   #include <string.h>

 #endif