This is Roman Haefeli's tcpsocketserver for FUDI and OSC.

Untested!

svn path=/trunk/externals/mrpeach/; revision=10527

4 files changed, 764 insertions, 0 deletions

diff --git a/osc/tcpsocket.FUDI.pd b/osc/tcpsocket.FUDI.pd
new file mode 100644
index 0000000..0ced636
--- /dev/null
+++ b/osc/tcpsocket.FUDI.pd
@@ -0,0 +1,132 @@
+#N canvas 585 75 446 533 10;

+#X obj 50 49 == \$2;

+#X obj 7 28 route in socket;

+#X obj 7 76 spigot;

+#N canvas 622 183 512 335 reset 0;

+#X obj 23 41 route \$2;

+#X obj 23 63 route reset;

+#X obj 23 83 t b b;

+#X msg 55 170 done;

+#X obj 23 113 outlet;

+#X text 161 33 this is used to:;

+#X text 87 114 a) reset the sockethandler on a new connection;

+#X text 88 129 (for instance \, if the previous connection was quitted

+in the middle of a packet).;

+#X text 55 213 b) check for the socketserver \, if a sockethandler

+on specified socket already exists.;

+#X obj 55 191 s \$1.TCPSOCKET;

+#X obj 23 19 r \$1.TCPSOCKET;

+#X connect 0 0 1 0;

+#X connect 1 0 2 0;

+#X connect 2 0 4 0;

+#X connect 2 1 3 0;

+#X connect 3 0 9 0;

+#X connect 10 0 0 0;

+#X restore 46 102 pd reset;

+#X obj 105 279 route socket ip;

+#X obj 41 367 list append;

+#X obj 58 323 list append;

+#X obj 7 299 t a b b b;

+#X obj 7 414 list prepend out;

+#X obj 41 391 list prepend socket.out;

+#X obj 58 345 list prepend ip.out;

+#X obj 7 442 list trim;

+#X text 16 220 the lower part makes [tcpsocketserver] behave like [tcpserver]

+;

+#X obj -2 136 cnv 15 450 70 empty empty empty 20 12 0 14 -204786 -66577

+0;

+#N canvas 385 67 454 323 FUDI 0;

+#X obj 23 6 inlet;

+#X obj 23 284 outlet;

+#N canvas 389 242 220 273 serialize 0;

+#X obj 5 72 t a a;

+#X obj 37 94 list prepend 0;

+#X obj 37 115 s \$0.inbuffer;

+#X obj 5 135 list length;

+#X obj 5 179 until;

+#X obj 5 156 t a b;

+#X obj 5 202 f;

+#X obj 50 205 + 1;

+#X msg 49 179 0;

+#X obj 5 228 tabread \$0.inbuffer;

+#X obj 5 50 inlet;

+#X obj 5 250 outlet;

+#X obj 5 12 table \$0.inbuffer 1024;

+#X connect 0 0 3 0;

+#X connect 0 1 1 0;

+#X connect 1 0 2 0;

+#X connect 3 0 5 0;

+#X connect 4 0 6 0;

+#X connect 5 0 4 0;

+#X connect 5 1 8 0;

+#X connect 6 0 7 0;

+#X connect 6 0 9 0;

+#X connect 7 0 6 1;

+#X connect 8 0 6 1;

+#X connect 9 0 11 0;

+#X connect 10 0 0 0;

+#X restore 23 30 pd serialize;

+#X obj 23 109 t a a;

+#X obj 97 181 list prepend;

+#X obj 195 180 t a;

+#X obj 23 211 list append;

+#X obj 23 234 t a b;

+#X obj 160 56 inlet;

+#X text 210 56 reset;

+#X obj 23 53 sel 10 13;

+#X msg 23 76 32;

+#X obj 23 133 sel 59;

+#X text 83 134 asci: semicolon is used as a delimiter;

+#X obj 160 152 b;

+#X obj 23 257 list append 10;

+#X connect 0 0 2 0;

+#X connect 2 0 10 0;

+#X connect 3 0 12 0;

+#X connect 3 1 4 0;

+#X connect 4 0 5 0;

+#X connect 4 0 6 1;

+#X connect 5 0 4 1;

+#X connect 6 0 7 0;

+#X connect 7 0 15 0;

+#X connect 7 1 6 1;

+#X connect 7 1 4 1;

+#X connect 8 0 14 0;

+#X connect 10 0 11 0;

+#X connect 10 1 11 0;

+#X connect 10 2 3 0;

+#X connect 11 0 3 0;

+#X connect 12 0 6 0;

+#X connect 14 0 4 1;

+#X connect 14 0 6 1;

+#X connect 15 0 1 0;

+#X restore 7 161 pd FUDI;

+#X text 70 162 <- PUT HERE THE PROTOCOL SPECIFIC DELIMITER CODE;

+#X text 15 197 --------------------------------------------------------

+;

+#X text 12 129 --------------------------------------------------------

+;

+#X obj 7 6 r \$1.TCPSOCKET;

+#X obj 7 465 s \$1.TCPSOCKET;

+#X obj 105 255 r \$1.TCPSOCKET;

+#X text 200 454 Author: Roman Haefeli;

+#X text 201 474 Version: 2009-01-11;

+#X text 50 74 <- only pass stream of own socket;

+#X connect 0 0 2 1;

+#X connect 1 0 2 0;

+#X connect 1 1 0 0;

+#X connect 2 0 14 0;

+#X connect 3 0 14 1;

+#X connect 4 0 5 1;

+#X connect 4 1 6 1;

+#X connect 5 0 9 0;

+#X connect 6 0 10 0;

+#X connect 7 0 8 0;

+#X connect 7 2 5 0;

+#X connect 7 3 6 0;

+#X connect 8 0 11 0;

+#X connect 9 0 11 0;

+#X connect 10 0 11 0;

+#X connect 11 0 19 0;

+#X connect 14 0 7 0;

+#X connect 18 0 1 0;

+#X connect 20 0 4 0;

diff --git a/osc/tcpsocket.OSC.pd b/osc/tcpsocket.OSC.pd
new file mode 100644
index 0000000..069af4f
--- /dev/null
+++ b/osc/tcpsocket.OSC.pd
@@ -0,0 +1,225 @@
+#N canvas 585 75 446 533 10;

+#X obj 50 49 == \$2;

+#X obj 7 28 route in socket;

+#X obj 7 76 spigot;

+#N canvas 622 183 512 335 reset 0;

+#X obj 23 41 route \$2;

+#X obj 23 63 route reset;

+#X obj 23 83 t b b;

+#X msg 55 170 done;

+#X obj 23 113 outlet;

+#X text 161 33 this is used to:;

+#X text 87 114 a) reset the sockethandler on a new connection;

+#X text 88 129 (for instance \, if the previous connection was quitted

+in the middle of a packet).;

+#X text 55 213 b) check for the socketserver \, if a sockethandler

+on specified socket already exists.;

+#X obj 55 191 s \$1.TCPSOCKET;

+#X obj 23 19 r \$1.TCPSOCKET;

+#X connect 0 0 1 0;

+#X connect 1 0 2 0;

+#X connect 2 0 4 0;

+#X connect 2 1 3 0;

+#X connect 3 0 9 0;

+#X connect 10 0 0 0;

+#X restore 40 102 pd reset;

+#X obj 104 280 route socket ip;

+#X obj 41 367 list append;

+#X obj 58 323 list append;

+#X obj 7 299 t a b b b;

+#X obj 7 414 list prepend out;

+#X obj 41 391 list prepend socket.out;

+#X obj 58 345 list prepend ip.out;

+#X obj 7 442 list trim;

+#X text 16 220 the lower part makes [tcpsocketserver] behave like [tcpserver]

+;

+#X obj -2 136 cnv 15 450 70 empty empty empty 20 12 0 14 -204786 -66577

+0;

+#X text 70 162 <- PUT HERE THE PROTOCOL SPECIFIC DELIMITER CODE;

+#X text 15 197 --------------------------------------------------------

+;

+#X text 13 129 --------------------------------------------------------

+;

+#X obj 7 6 r \$1.TCPSOCKET;

+#X obj 7 465 s \$1.TCPSOCKET;

+#X obj 104 256 r \$1.TCPSOCKET;

+#X text 200 454 Author: Roman Haefeli;

+#X text 201 474 Version: 2009-01-11;

+#X text 55 75 <- only pass stream of own socket;

+#N canvas 395 78 268 176 OSC 0;

+#X obj 27 18 inlet;

+#X obj 27 156 outlet;

+#X obj 144 23 inlet;

+#X text 194 23 reset;

+#N canvas 628 406 424 313 drip 0;

+#X obj 12 15 inlet;

+#X obj 12 226 outlet;

+#X obj 107 16 table \$0.buffer 65536;

+#X obj 76 82 s \$0.buffer;

+#X obj 76 61 list prepend 0;

+#X obj 12 37 t a a;

+#X text 9 265 this 'drip' approach might use more memory \, but hopefully

+less cpu cycles.;

+#X obj 12 102 list length;

+#X obj 12 150 until;

+#X obj 12 126 t a b;

+#X obj 12 173 f;

+#X obj 60 176 + 1;

+#X msg 61 150 0;

+#X obj 12 202 tabread \$0.buffer;

+#X connect 0 0 5 0;

+#X connect 4 0 3 0;

+#X connect 5 0 7 0;

+#X connect 5 1 4 0;

+#X connect 7 0 9 0;

+#X connect 8 0 10 0;

+#X connect 9 0 8 0;

+#X connect 9 1 12 0;

+#X connect 10 0 11 0;

+#X connect 10 0 13 0;

+#X connect 11 0 10 1;

+#X connect 12 0 10 1;

+#X connect 13 0 1 0;

+#X restore 27 49 pd drip;

+#N canvas 820 354 408 355 parse_frameheader 0;

+#X obj 14 10 inlet;

+#X obj 14 304 outlet;

+#X obj 322 178 outlet;

+#X obj 134 228 list prepend;

+#X obj 230 228 t a;

+#X obj 14 43 list prepend 0;

+#X obj 14 123 f;

+#X obj 14 144 + 1;

+#X obj 14 166 sel 4;

+#X obj 14 99 t b a;

+#X obj 14 69 route 0 1;

+#X text 97 64 0 = frame header;

+#X text 97 80 1 = frame content;

+#X obj 14 187 t b b;

+#X obj 109 22 r \$0.route;

+#X obj 46 230 s \$0.route;

+#X msg 46 208 1;

+#X obj 14 261 list append;

+#X obj 243 18 inlet;

+#X obj 243 44 b;

+#X msg 272 45 0;

+#X obj 272 65 s \$0.route;

+#N canvas 504 266 169 262 MSB_2SB_3SB_LSB->float 0;

+#X obj 7 10 inlet;

+#X obj 7 214 outlet;

+#X obj 7 33 unpack f f f f;

+#X obj 70 74 << 8;

+#X obj 38 118 << 16;

+#X obj 7 165 << 24;

+#X obj 70 98 +;

+#X obj 38 139 +;

+#X obj 7 190 +;

+#X connect 0 0 2 0;

+#X connect 2 0 5 0;

+#X connect 2 1 4 0;

+#X connect 2 2 3 0;

+#X connect 2 3 6 1;

+#X connect 3 0 6 0;

+#X connect 4 0 7 0;

+#X connect 5 0 8 0;

+#X connect 6 0 7 1;

+#X connect 7 0 8 1;

+#X connect 8 0 1 0;

+#X restore 14 282 pd MSB_2SB_3SB_LSB->float;

+#X text 288 19 new packet;

+#X text 23 327 frame length;

+#X text 322 201 data stream;

+#X connect 0 0 5 0;

+#X connect 3 0 4 0;

+#X connect 3 0 17 1;

+#X connect 4 0 3 1;

+#X connect 5 0 10 0;

+#X connect 6 0 7 0;

+#X connect 7 0 6 1;

+#X connect 7 0 8 0;

+#X connect 8 0 13 0;

+#X connect 9 0 6 0;

+#X connect 9 1 3 0;

+#X connect 10 0 9 0;

+#X connect 10 1 2 0;

+#X connect 13 0 17 0;

+#X connect 13 1 16 0;

+#X connect 14 0 5 1;

+#X connect 16 0 15 0;

+#X connect 17 0 22 0;

+#X connect 18 0 19 0;

+#X connect 18 0 20 0;

+#X connect 19 0 3 1;

+#X connect 20 0 21 0;

+#X connect 20 0 6 1;

+#X connect 22 0 1 0;

+#X restore 27 77 pd parse_frameheader;

+#N canvas 748 498 450 300 form_packet 0;

+#X obj 68 23 inlet;

+#X text 106 24 length;

+#X obj 194 22 inlet;

+#X text 244 23 stream;

+#X obj 120 190 list prepend;

+#X obj 216 190 t a;

+#X obj 14 123 f;

+#X obj 14 144 + 1;

+#X obj 14 99 t b a;

+#X obj 14 187 t b b;

+#X obj 46 213 list append;

+#X obj 14 166 sel 0;

+#X obj 46 253 outlet;

+#X text 100 254 OSC packet;

+#X text 261 262 EOP;

+#X obj 210 261 outlet;

+#X obj 68 88 t b a;

+#X msg 68 111 0;

+#X connect 0 0 16 0;

+#X connect 2 0 8 0;

+#X connect 4 0 5 0;

+#X connect 4 0 10 1;

+#X connect 5 0 4 1;

+#X connect 6 0 7 0;

+#X connect 7 0 6 1;

+#X connect 7 0 11 0;

+#X connect 8 0 6 0;

+#X connect 8 1 4 0;

+#X connect 9 0 15 0;

+#X connect 9 1 10 0;

+#X connect 10 0 12 0;

+#X connect 11 0 9 0;

+#X connect 16 0 17 0;

+#X connect 16 0 4 1;

+#X connect 16 1 11 1;

+#X connect 17 0 6 1;

+#X restore 27 129 pd form_packet;

+#X obj 169 85 b;

+#X obj 144 50 b;

+#X connect 0 0 4 0;

+#X connect 2 0 8 0;

+#X connect 4 0 5 0;

+#X connect 5 0 6 0;

+#X connect 5 1 6 1;

+#X connect 6 0 1 0;

+#X connect 6 1 7 0;

+#X connect 7 0 5 1;

+#X connect 8 0 5 1;

+#X restore 7 161 pd OSC;

+#X connect 0 0 2 1;

+#X connect 1 0 2 0;

+#X connect 1 1 0 0;

+#X connect 2 0 23 0;

+#X connect 3 0 23 1;

+#X connect 4 0 5 1;

+#X connect 4 1 6 1;

+#X connect 5 0 9 0;

+#X connect 6 0 10 0;

+#X connect 7 0 8 0;

+#X connect 7 2 5 0;

+#X connect 7 3 6 0;

+#X connect 8 0 11 0;

+#X connect 9 0 11 0;

+#X connect 10 0 11 0;

+#X connect 11 0 18 0;

+#X connect 17 0 1 0;

+#X connect 19 0 4 0;

+#X connect 23 0 7 0;

diff --git a/osc/tcpsocketserver-help.pd b/osc/tcpsocketserver-help.pd
new file mode 100644
index 0000000..d0e6045
--- /dev/null
+++ b/osc/tcpsocketserver-help.pd
@@ -0,0 +1,301 @@
+#N canvas 35 3 878 523 10;

+#X declare -stdpath extra/mrpeach;

+#X declare -stdlib extra/pdstring declare -stdlib extra/maxlib;

+#X declare -stdpath extra/mrpeach;

+#X declare -stdlib extra/pdstring declare -stdlib extra/maxlib;

+#X declare -stdpath extra/mrpeach;

+#X msg 471 74 print;

+#X text 521 75 list of connections;

+#X text 627 103 send to all clients;

+#X text 629 132 send to client 1;

+#X text 615 155 send to client on socket 504;

+#X text 613 28 'send' prefix is optional;

+#X text 474 48 (the first number is socket number);

+#X msg 556 257 disconnectsocket \$1;

+#X msg 484 284 disconnectclient \$1;

+#X floatatom 506 215 5 0 0 0 - - -;

+#X obj 484 235 f;

+#X obj 484 216 bng 15 250 50 0 empty empty empty 17 7 0 10 -258699

+-241291 -1;

+#X floatatom 578 216 5 0 0 0 - - -;

+#X obj 556 235 f;

+#X obj 556 216 bng 15 250 50 0 empty empty empty 17 7 0 10 -258699

+-241291 -1;

+#X text 483 197 disconnect by socket or client number;

+#X obj 618 335 unpack 0 0 0 0;

+#X floatatom 618 355 3 0 0 0 - - -;

+#X floatatom 649 355 3 0 0 0 - - -;

+#X floatatom 681 356 3 0 0 0 - - -;

+#X floatatom 715 356 3 0 0 0 - - -;

+#X text 616 372 IP;

+#X floatatom 569 355 5 0 0 0 - - -;

+#X text 566 371 socket;

+#X floatatom 520 376 5 0 0 0 - - -;

+#X text 520 391 number of connections;

+#X obj 471 433 spigot;

+#X obj 510 413 tgl 15 0 empty empty enable_print 17 7 0 10 -24198 -258699

+-258699 0 1;

+#X text 15 37 [tcpsocketserver <protocol> <port>];

+#X obj 469 311 cnv 15 185 22 empty empty empty 20 12 0 14 -204786 -66577

+0;

+#X obj 471 314 tcpsocketserver FUDI 2468;

+#X text 15 115 [tcpsocketserver] is able to handle multiple sockets

+of a packet oriented protocol correctly \, unlike [tcpserver] \, which

+might mix up packets from different sockets.;

+#X text 24 308 - OSC;

+#X text 16 245 each protocol requires its own specific socket handler

+abstraction \, which should be named [tcpsocket.PROTOCOL]. currently

+available are the protocols:;

+#X text 23 293 - FUDI;

+#N canvas 704 167 472 356 EXTENDABILITY 0;

+#X text 3 39 Support for more protocols can easily be added. In order

+to do so:;

+#X text 5 10 EXTENDABILITY;

+#X text 6 105 - open tcpsocket.NEWPROTOCOL.pd;

+#X text 7 127 - edit the green-marked subpatch;

+#X text 10 208 - save it;

+#X text 12 227 - in order to use it \, instantiate:;

+#X text 46 247 [tcpsocketserver NEWPROTOCOL <port>];

+#X text 8 148 - replace code with code \, that creates proper packets

+out of the incoming stream for the desired protocol. don't forget to

+implement a reset mechanism \, in case a socket is closed in the middle

+of packet transmission.;

+#X text 5 83 - copy tcpsocket.FUDI.pd to tcpsocket.NEWPROTOCOL.pd;

+#X restore 21 387 pd EXTENDABILITY;

+#X text 17 453 Author: Roman Haefeli;

+#X text 16 468 Version: 2009-01-11;

+#X text 15 65 [tcpsocketserver] is meant to be a protocol-aware drop-in

+replacement for [tcpserver]. it uses same the same inlet and outlet

+configuration as [tcpserver].;

+#X text 469 478 only well-formed FUDI messages are received here.;

+#N canvas 469 232 147 274 EXAMPLES 0;

+#N canvas 231 0 579 756 FUDI 0;

+#X obj 9 39 cnv 15 550 240 empty empty client_1 20 12 0 14 -249661

+-66577 0;

+#X obj 25 193 tcpclient;

+#X msg 369 94 connect localhost 11001;

+#X msg 393 115 disconnect;

+#X obj 369 72 sel 1 0;

+#X obj 369 51 tgl 15 0 empty empty empty 17 7 0 10 -261234 -1 -1 0

+1;

+#X obj 25 259 print CLIENT_1;

+#X msg 25 70 one two;

+#X obj 25 91 any2string 0 -1;

+#X msg 69 151 59 10;

+#X msg 33 117 32 116 104 114 101 101 23;

+#X obj 9 286 cnv 15 550 150 empty empty client_2 20 12 0 14 -249661

+-66577 0;

+#X msg 369 341 connect localhost 11001;

+#X msg 393 362 disconnect;

+#X obj 369 319 sel 1 0;

+#X obj 369 298 tgl 15 0 empty empty empty 17 7 0 10 -261234 -1 -1 0

+1;

+#X obj 25 214 string2any 0 59;

+#X obj 25 234 route bang;

+#X obj 25 373 netclient;

+#X obj 8 9 declare -stdlib extra/pdstring declare -stdlib extra/maxlib

+;

+#X obj 25 402 print CLIENT_2;

+#X text 169 324 <- send FUDI message;

+#X obj 10 444 cnv 15 550 300 empty empty FUDI_server 20 12 0 14 -241408

+-66577 0;

+#X obj 12 600 tcpsocketserver FUDI 11001;

+#X obj 12 674 string2any 0 59;

+#X obj 12 695 route bang;

+#X obj 191 620 unpack 0 0 0 0;

+#X floatatom 191 640 3 0 0 0 - - -;

+#X floatatom 222 640 3 0 0 0 - - -;

+#X floatatom 254 641 3 0 0 0 - - -;

+#X floatatom 288 641 3 0 0 0 - - -;

+#X text 189 657 IP;

+#X floatatom 131 640 5 0 0 0 - - -;

+#X floatatom 71 641 5 0 0 0 - - -;

+#X text 60 656 clients;

+#X text 127 656 socket;

+#X text 132 675 <--;

+#X text 165 675 [tcpsocketserver FUDI] does _not_ remove the trailing

+' \; ';

+#X text 165 70 1) start a FUDI message;

+#X text 232 118 2) continue;

+#X text 118 152 3) finish FUDI message (with semicolon - newline);

+#X text 391 52 connect;

+#X text 390 296 connect;

+#X text 20 475 [tcpsocketserver FUDI] doesn't take care of building

+FUDI-compliant messages. this should be done by the user.;

+#X text 154 216 4) try sending a message from client_2 during composing

+a message with client_1 and see \, how the server behaves.;

+#X text 279 522 <- this doesn't work;

+#X text 315 549 <- this should;

+#X msg 25 323 send four five six;

+#X msg 43 550 client 2 115 101 118 101 110 32 59 10;

+#X msg 42 521 client 2 115 101 118 101 110 32;

+#X obj 12 720 print SERVER;

+#X connect 1 0 16 0;

+#X connect 2 0 1 0;

+#X connect 3 0 1 0;

+#X connect 4 0 2 0;

+#X connect 4 1 3 0;

+#X connect 5 0 4 0;

+#X connect 7 0 8 0;

+#X connect 8 0 1 0;

+#X connect 9 0 1 0;

+#X connect 10 0 1 0;

+#X connect 12 0 18 0;

+#X connect 13 0 18 0;

+#X connect 14 0 12 0;

+#X connect 14 1 13 0;

+#X connect 15 0 14 0;

+#X connect 16 0 17 0;

+#X connect 17 1 6 0;

+#X connect 18 0 20 0;

+#X connect 23 0 24 0;

+#X connect 23 1 33 0;

+#X connect 23 2 32 0;

+#X connect 23 3 26 0;

+#X connect 24 0 25 0;

+#X connect 25 1 50 0;

+#X connect 26 0 27 0;

+#X connect 26 1 28 0;

+#X connect 26 2 29 0;

+#X connect 26 3 30 0;

+#X connect 47 0 18 0;

+#X connect 48 0 23 0;

+#X connect 49 0 23 0;

+#X restore 23 25 pd FUDI;

+#N canvas 231 0 579 756 OSC 0;

+#X obj 9 39 cnv 15 550 240 empty empty client_1 20 12 0 14 -249661

+-66577 0;

+#X obj 25 211 tcpclient;

+#X msg 357 229 disconnect;

+#X obj 333 186 sel 1 0;

+#X obj 333 165 tgl 15 0 empty empty empty 17 7 0 10 -261234 -1 -1 0

+1;

+#X obj 25 259 print CLIENT_1;

+#X obj 9 286 cnv 15 550 150 empty empty client_2 20 12 0 14 -249661

+-66577 0;

+#X msg 393 362 disconnect;

+#X obj 369 319 sel 1 0;

+#X obj 369 298 tgl 15 0 empty empty empty 17 7 0 10 -261234 -1 -1 0

+1;

+#X obj 8 9 declare -stdlib extra/pdstring declare -stdlib extra/maxlib

+;

+#X obj 25 417 print CLIENT_2;

+#X obj 10 444 cnv 15 550 300 empty empty OSC_server 20 12 0 14 -241408

+-66577 0;

+#X obj 188 636 unpack 0 0 0 0;

+#X floatatom 188 656 3 0 0 0 - - -;

+#X floatatom 219 656 3 0 0 0 - - -;

+#X floatatom 251 657 3 0 0 0 - - -;

+#X floatatom 285 657 3 0 0 0 - - -;

+#X text 186 673 IP;

+#X floatatom 130 656 5 0 0 0 - - -;

+#X floatatom 73 657 5 0 0 0 - - -;

+#X text 62 672 clients;

+#X text 126 672 socket;

+#X text 355 166 connect;

+#X text 390 296 connect;

+#X obj 16 616 tcpsocketserver OSC 11002;

+#X obj 16 694 unpackOSC;

+#X obj 16 720 print SERVER;

+#X msg 333 208 connect localhost 11002;

+#X msg 369 341 connect localhost 11002;

+#X obj 25 234 unpackOSCstream;

+#X obj 25 373 tcpclient;

+#X obj 25 395 unpackOSCstream;

+#X msg 49 498 /synth1/tone3/freq 440;

+#X msg 25 79 0 0 0 16 47 102 114 101 113;

+#X msg 41 104 0 0 0 44 105 0 0 0 0 1 184;

+#X text 155 324 send OSC message;

+#X msg 25 323 /amplitude 0.78;

+#X obj 25 347 packOSCstream;

+#X obj 16 522 packOSCstream;

+#X obj 16 594 list trim;

+#X msg 16 473 /synth3/tone4/amplitude 0.36;

+#X obj 180 555 hradio 15 1 0 2 empty empty empty 0 -8 0 10 -4034 -1

+-1 0;

+#X obj 180 573 + 1;

+#X text 221 555 client;

+#X obj 16 551 list prepend 1;

+#X obj 16 573 list prepend client;

+#X text 236 80 1) start sending an OSC packet;

+#X text 247 106 2) complete the OSC packet;

+#X text 59 137 also try sending an OSC packet from client_2 between

+1) and 2);

+#X text 124 520 <- use [packOSCstream] in order to create OSC packets

+suitable for tcp transport.;

+#X text 238 486 send to clients;

+#X text 93 695 <---;

+#X text 139 694 CAUTION: not [unpackOSCstream] is used here \, since

+[tcpsocket.OSC] already removes the 4-byte header.;

+#X connect 1 0 30 0;

+#X connect 2 0 1 0;

+#X connect 3 0 28 0;

+#X connect 3 1 2 0;

+#X connect 4 0 3 0;

+#X connect 7 0 31 0;

+#X connect 8 0 29 0;

+#X connect 8 1 7 0;

+#X connect 9 0 8 0;

+#X connect 13 0 14 0;

+#X connect 13 1 15 0;

+#X connect 13 2 16 0;

+#X connect 13 3 17 0;

+#X connect 25 0 26 0;

+#X connect 25 1 20 0;

+#X connect 25 2 19 0;

+#X connect 25 3 13 0;

+#X connect 26 0 27 0;

+#X connect 28 0 1 0;

+#X connect 29 0 31 0;

+#X connect 30 0 5 0;

+#X connect 31 0 32 0;

+#X connect 32 0 11 0;

+#X connect 33 0 39 0;

+#X connect 34 0 1 0;

+#X connect 35 0 1 0;

+#X connect 37 0 38 0;

+#X connect 38 0 31 0;

+#X connect 39 0 45 0;

+#X connect 40 0 25 0;

+#X connect 41 0 39 0;

+#X connect 42 0 43 0;

+#X connect 43 0 45 1;

+#X connect 45 0 46 0;

+#X connect 46 0 40 0;

+#X restore 23 49 pd OSC;

+#X restore 21 365 pd EXAMPLES;

+#X obj 471 455 print FUDI;

+#X msg 471 101 broadcast 97 98 99 59 10;

+#X msg 471 128 client 1 97 98 99 59 10;

+#X msg 471 155 send 504 97 98 99 59 10;

+#X msg 471 28 10 97 98 99 59 10;

+#X text 17 8 TCPSOCKETSERVER - a protocol-aware wrapper aroun [tcpserver]

+;

+#X text 13 167 [tcpsocketserver] dynamically creates (internally) an

+instance of a socket handler abstraction [tcpsocket.PROTOCOL] for each

+opened socket. every socket handler creates proper packets from the

+incoming stream and sends them to the left outlet of [tcpsocketserver].

+;

+#X connect 0 0 30 0;

+#X connect 7 0 30 0;

+#X connect 8 0 30 0;

+#X connect 9 0 10 1;

+#X connect 10 0 8 0;

+#X connect 11 0 10 0;

+#X connect 12 0 13 1;

+#X connect 13 0 7 0;

+#X connect 14 0 13 0;

+#X connect 16 0 17 0;

+#X connect 16 1 18 0;

+#X connect 16 2 19 0;

+#X connect 16 3 20 0;

+#X connect 26 0 41 0;

+#X connect 27 0 26 1;

+#X connect 30 0 26 0;

+#X connect 30 1 24 0;

+#X connect 30 2 22 0;

+#X connect 30 3 16 0;

+#X connect 42 0 30 0;

+#X connect 43 0 30 0;

+#X connect 44 0 30 0;

+#X connect 45 0 30 0;

diff --git a/osc/tcpsocketserver.pd b/osc/tcpsocketserver.pd
new file mode 100644
index 0000000..3e8f8dd
--- /dev/null
+++ b/osc/tcpsocketserver.pd
@@ -0,0 +1,106 @@
+#N canvas 332 12 333 552 10;

+#X declare -stdpath extra/mrpeach;

+#X obj 13 39 inlet;

+#X obj 13 464 outlet;

+#X obj 75 463 outlet;

+#X obj 137 463 outlet;

+#X obj 199 462 outlet;

+#X obj 36 187 list trim;

+#X obj 59 145 list trim;

+#X obj 59 124 list prepend socket;

+#X obj 36 166 list prepend num_of_clients;

+#X obj 82 103 list trim;

+#X obj 82 82 list prepend ip;

+#N canvas 816 227 247 348 \$0.TCPSOCKETCONTAINER 0;

+#X restore 14 372 pd \$0.TCPSOCKETCONTAINER;

+#N canvas 491 218 502 504 socketmanager 0;

+#X msg 24 196 \$1 reset;

+#X obj 25 259 route done;

+#X obj 5 175 t a a b;

+#X msg 25 280 0;

+#X msg 44 280 1;

+#X obj 5 303 spigot;

+#X obj 44 344 f;

+#X obj 76 344 + 20;

+#X obj 5 323 t a b b;

+#X obj 24 365 list append \$1;

+#X obj 24 388 list append;

+#X obj 5 412 list append;

+#X obj 5 476 s pd-\$0.TCPSOCKETCONTAINER;

+#X obj 5 432 list append \$0;

+#X obj 5 24 route socket num_of_clients;

+#X obj 84 46 t a a;

+#X obj 69 73 -;

+#X obj 69 94 == 1;

+#X obj 5 122 spigot;

+#X obj 5 3 r \$0.TCPSOCKET;

+#X obj 24 217 s \$0.TCPSOCKET;

+#X obj 25 238 r \$0.TCPSOCKET;

+#X msg 5 454 obj 10 \$3 tcpsocket.\$2 \$4 \$1 \, loadbang;

+#X obj 5 148 t a b;

+#X msg 65 132 0;

+#X text 116 78 when a new client connects (num_of_clients: +1);

+#X text 119 197 send a 'reset' to the according socket handler;

+#X text 114 266 and if it doesn't respond (which means \, there is

+no socket handler on specified socket) \,;

+#X text 119 368 create one (into pd-\$0.TCPSOCKETCONTAINER).;

+#X connect 0 0 20 0;

+#X connect 1 0 3 0;

+#X connect 2 0 5 0;

+#X connect 2 1 0 0;

+#X connect 2 2 4 0;

+#X connect 3 0 5 1;

+#X connect 4 0 5 1;

+#X connect 5 0 8 0;

+#X connect 6 0 7 0;

+#X connect 6 0 10 1;

+#X connect 7 0 6 1;

+#X connect 8 0 11 0;

+#X connect 8 1 9 0;

+#X connect 8 2 6 0;

+#X connect 9 0 10 0;

+#X connect 10 0 11 1;

+#X connect 11 0 13 0;

+#X connect 13 0 22 0;

+#X connect 14 0 18 0;

+#X connect 14 1 15 0;

+#X connect 15 0 16 1;

+#X connect 15 1 16 0;

+#X connect 16 0 17 0;

+#X connect 17 0 18 1;

+#X connect 18 0 23 0;

+#X connect 19 0 14 0;

+#X connect 21 0 1 0;

+#X connect 22 0 12 0;

+#X connect 23 0 2 0;

+#X connect 23 1 24 0;

+#X connect 24 0 18 1;

+#X restore 14 349 pd socketmanager;

+#X obj 13 60 tcpserver \$2;

+#X obj 13 417 r \$0.TCPSOCKET;

+#X obj 13 208 list prepend in;

+#X obj 13 440 route out num_of_clients socket.out ip.out;

+#X obj 13 230 list trim;

+#X obj 82 316 s \$0.TCPSOCKET;

+#X text 23 501 Author: Roman Haefeli;

+#X text 24 518 Version: 2009-01-11;

+#X text 94 292 [tcpsocketserver <protocol> <port>];

+#X obj 13 14 declare -stdpath extra/mrpeach;

+#X connect 0 0 13 0;

+#X connect 5 0 18 0;

+#X connect 6 0 18 0;

+#X connect 7 0 6 0;

+#X connect 8 0 5 0;

+#X connect 9 0 18 0;

+#X connect 10 0 9 0;

+#X connect 13 0 15 0;

+#X connect 13 1 8 0;

+#X connect 13 2 7 0;

+#X connect 13 3 10 0;

+#X connect 14 0 16 0;

+#X connect 15 0 17 0;

+#X connect 16 0 1 0;

+#X connect 16 1 2 0;

+#X connect 16 2 3 0;

+#X connect 16 3 4 0;

+#X connect 17 0 18 0;