diff options
Diffstat (limited to 'Pd_firmware/Pd_firmware.pde')
| -rw-r--r-- | Pd_firmware/Pd_firmware.pde | 50 |
1 files changed, 24 insertions, 26 deletions
diff --git a/Pd_firmware/Pd_firmware.pde b/Pd_firmware/Pd_firmware.pde index ed4b1e0..c17d218 100644 --- a/Pd_firmware/Pd_firmware.pde +++ b/Pd_firmware/Pd_firmware.pde @@ -120,21 +120,21 @@ /* Arduino->Computer byte cycle * ---------------------- - * 0 start of cycle marker (255/11111111) - * 1 digital read from Arduino // 0-6 bitmask - * 2 digital read from Arduino // 7-13 bitmask - * 3 analog input pin 0 from Arduino // byte 0 - * 4 analog input pin 1 from Arduino // byte 1 - * 5 analog input pin 2 from Arduino // byte 2 - * 6 analog input pin 3 from Arduino // byte 3 - * 7 analog input pin 4 from Arduino // byte 4 - * 8 analog input pin 5 from Arduino // byte 5 - * 9 analog input pin 6 from Arduino // byte 6 - * 10 analog input pin 7 from Arduino // byte 10 - * 11 analog input pin 8 from Arduino // byte 11 - * 12 analog input pin 9 from Arduino // byte 12 - * 13 analog input pin 10 from Arduino // byte 13 - * 14 analog input pin 11 from Arduino // byte 14 + * 0 start of cycle marker (255/11111111) + * 1 digital read from Arduino // 0-6 bitmask + * 2 digital read from Arduino // 7-13 bitmask + * 3 low byte from analog input pin 0 + * 4 high byte from analog input pin 0 + * 5 low byte from analog input pin 1 + * 6 high byte from analog input pin 1 + * 7 low byte from analog input pin 2 + * 8 high byte from analog input pin 2 + * 9 low byte from analog input pin 3 + * 10 high byte from analog input pin 3 + * 11 low byte from analog input pin 4 + * 12 high byte from analog input pin 4 + * 13 low byte from analog input pin 5 + * 14 high byte from analog input pin 5 */ #define TOTAL_DIGITAL_PINS 14 @@ -178,26 +178,24 @@ int analogData; void transmitDigitalInput(byte startPin) { byte i; byte digitalPin; - byte digitalPinBit; - byte transmitByte; +// byte digitalPinBit; + byte transmitByte = 0; byte digitalData; for(i=0;i<7;++i) { digitalPin = i+startPin; - digitalPinBit = OUTPUT << digitalPin; +/* digitalPinBit = OUTPUT << digitalPin; // only read the pin if its set to input if(digitalPinStatus & digitalPinBit) { digitalData = 0; // pin set to OUTPUT, don't read } else if( (digitalPin >= 9) && (pwmStatus & (1 << digitalPin)) ) { digitalData = 0; // pin set to PWM, don't read + }*/ + if( !(digitalPinStatus & (1 << digitalPin)) ) { + digitalData = (byte) digitalRead(digitalPin); + transmitByte = transmitByte + ((1 << i) * digitalData); } - else { - digitalData = digitalRead(digitalPin); - } - /* the next line probably needs to be re-thought (i.e. it might not work...) since my - first attempt was miserably wrong. <hans@at.or.at> */ - transmitByte = transmitByte + ((2^i)*digitalData); } printByte(transmitByte); } @@ -412,7 +410,7 @@ void processInput(byte inputData) { void setup() { byte i; - beginSerial(9600); + beginSerial(19200); for(i=0; i<TOTAL_DIGITAL_PINS; ++i) { setPinMode(i,INPUT); } @@ -442,8 +440,8 @@ void loop() { analogData = analogRead(analogPin); // these two bytes get converted back into the whole number in Pd // the higher bits should be zeroed so that the 8th bit doesn't get set - printByte(analogData >> 7); // bitshift the big stuff into the output byte printByte(analogData % 128); // mod by 32 for the small byte + printByte(analogData >> 7); // bitshift the big stuff into the output byte checkForInput(); } |