aboutsummaryrefslogtreecommitdiff
path: root/Pd_firmware
diff options
context:
space:
mode:
Diffstat (limited to 'Pd_firmware')
-rw-r--r--Pd_firmware/Pd_firmware.pde26
1 files changed, 16 insertions, 10 deletions
diff --git a/Pd_firmware/Pd_firmware.pde b/Pd_firmware/Pd_firmware.pde
index b0c1056..884d77b 100644
--- a/Pd_firmware/Pd_firmware.pde
+++ b/Pd_firmware/Pd_firmware.pde
@@ -39,11 +39,11 @@
*/
/*
- * TODO: add pulseIn functionality
+ * TODO: add pulseOut functionality
* TODO: add software PWM for servos, etc (servo.h or pulse.h)
* TODO: redesign protocol to accomodate boards with more I/Os
* TODO:
- * TODO: add "outputMode all 0/1" command
+ * TODO: add "pinMode all 0/1" command
* TODO: add cycle markers to mark start of analog, digital, pulseIn, and PWM
*/
@@ -58,7 +58,7 @@
* control: 128-255
*/
-/* computer->Arduino commands
+/* computer<->Arduino commands
* -------------------- */
/* 128-129 // UNUSED */
#define SET_PIN_ZERO_TO_IN 130 // set digital pin 0 to INPUT
@@ -86,6 +86,9 @@
#define FOUR_ANALOG_INS 164 // enable reporting for 4 analog ins (0-3)
#define FIVE_ANALOG_INS 165 // enable reporting for 5 analog ins (0-4)
#define SIX_ANALOG_INS 166 // enable reporting for 6 analog ins (0-5)
+#define SEVEN_ANALOG_INS 167 // enable reporting for 6 analog ins (0-6)
+#define EIGHT_ANALOG_INS 168 // enable reporting for 6 analog ins (0-7)
+#define NINE_ANALOG_INS 169 // enable reporting for 6 analog ins (0-8)
/* 167-199 // UNUSED */
#define SET_PIN_ZERO_TO_OUT 200 // set digital pin 0 to OUTPUT
#define SET_PIN_ONE_TO_OUT 201 // set digital pin 1 to OUTPUT
@@ -137,7 +140,7 @@
/* analog input message format
* ----------------------
- * 0 analog input marker
+ * 0 analog input marker (160 + number of pins to report)
* 1 high byte from analog input pin 0
* 2 low byte from analog input pin 0
* 3 high byte from analog input pin 1
@@ -270,9 +273,9 @@ void disSoftPwm(int pin) {
* then processes all of the stored data
*/
void checkForInput() {
- if(serialAvailable()) {
- while(serialAvailable()) {
- processInput( (byte)serialRead() );
+ if(Serial.available()) {
+ while(Serial.available()) {
+ processInput( (byte)Serial.read() );
}
}
}
@@ -382,8 +385,11 @@ void processInput(byte inputData) {
case FOUR_ANALOG_INS: // analog 0-3 on
case FIVE_ANALOG_INS: // analog 0-4 on
case SIX_ANALOG_INS: // analog 0-5 on
- analogInputsEnabled = inputData - ZERO_ANALOG_INS;
- break;
+ case SEVEN_ANALOG_INS: // analog 0-6 on
+ case EIGHT_ANALOG_INS: // analog 0-7 on
+ case NINE_ANALOG_INS: // analog 0-8 on
+ analogInputsEnabled = inputData - ZERO_ANALOG_INS;
+ break;
case ENABLE_PWM:
waitForData = 2; // 2 bytes needed (pin#, dutyCycle)
executeMultiByteCommand = inputData;
@@ -423,7 +429,7 @@ void processInput(byte inputData) {
void setup() {
byte i;
- beginSerial(19200);
+ Serial.begin(19200);
for(i=0; i<TOTAL_DIGITAL_PINS; ++i) {
setPinMode(i,INPUT);
}