path: root/arduino-help.pd

#N canvas 463 31 699 599 10;
#X obj 568 9 import flatspace;
#N canvas 233 472 462 312 INSTALL-NOTES 0;
#X text 39 201 [comport] \, from pd-cvs/externals/iem/comport;
#X text 39 185 [arduino] \, from pd-cvs/externals/hardware/arduino
;
#X text 39 217 [speedlim] \, from iemlib \, pd-cvs/externals/iemlib
;
#X text 20 27 1 General information on arduino: http://www.arduino.cc
;
#X text 20 61 2 You need the firmware for Pduino: http://at.or.at/hans/pd/objects.html
;
#X text 20 109 3 Don't forget to upload the firmware onto your arduino
board !;
#X text 21 159 4 Pduino needs the following externals and abstractions:
;
#X text 22 257 5 If you still have troubles \, mail to the pd list
!;
#X restore 25 92 pd INSTALL-NOTES;
#X text 150 93 <- read this first !;
#X obj 16 172 hradio 15 1 0 8 empty empty empty 0 -6 0 8 -260818 -1
-1 0;
#X msg 16 190 open \$1;
#X floatatom 99 189 5 0 0 0 - - -;
#X msg 27 211 close;
#X msg 37 232 info;
#X text 11 149 select/close the serial port:;
#N canvas 248 49 459 336 DIGITAL-OUTPUT 0;
#X text 72 97 I/O the individual pins:;
#X text 20 22 NOTE: don't forget to set pins to output mode first!
;
#X obj 40 194 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577
0;
#X msg 49 197 digital 13 0;
#X obj 168 134 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 185 134 tgl 15 0 empty empty 8 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 202 134 tgl 15 0 empty empty 9 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 219 134 tgl 15 0 empty empty 10 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 236 134 tgl 15 0 empty empty 11 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 253 134 tgl 15 0 empty empty 12 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 270 134 tgl 15 0 empty empty 13 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 49 134 tgl 15 0 empty empty 0 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 66 134 tgl 15 0 empty empty 1 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 83 134 tgl 15 0 empty empty 2 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 100 134 tgl 15 0 empty empty 3 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 117 134 tgl 15 0 empty empty 5 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 134 134 tgl 15 0 empty empty 6 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 151 134 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
#N canvas 478 328 806 356 generate 0;
#X obj 49 24 inlet;
#X obj 89 24 inlet;
#X obj 128 24 inlet;
#X obj 168 24 inlet;
#X obj 208 24 inlet;
#X obj 248 24 inlet;
#X obj 287 24 inlet;
#X obj 327 24 inlet;
#X obj 368 23 inlet;
#X obj 408 23 inlet;
#X obj 447 23 inlet;
#X obj 487 23 inlet;
#X obj 527 23 inlet;
#X msg 49 66 digital 0 \$1;
#X msg 89 88 digital 1 \$1;
#X msg 128 110 digital 2 \$1;
#X msg 168 130 digital 3 \$1;
#X msg 208 62 digital 4 \$1;
#X msg 248 84 digital 5 \$1;
#X msg 287 106 digital 6 \$1;
#X msg 327 126 digital 7 \$1;
#X msg 368 58 digital 8 \$1;
#X msg 408 80 digital 9 \$1;
#X msg 447 102 digital 10 \$1;
#X msg 487 122 digital 11 \$1;
#X msg 527 50 digital 12 \$1;
#X obj 566 23 inlet;
#X msg 566 70 digital 13 \$1;
#X obj 305 196 prepend set;
#X obj 305 254 outlet;
#X obj 305 215 trigger bang anything;
#X connect 0 0 13 0;
#X connect 1 0 14 0;
#X connect 2 0 15 0;
#X connect 3 0 16 0;
#X connect 4 0 17 0;
#X connect 5 0 18 0;
#X connect 6 0 19 0;
#X connect 7 0 20 0;
#X connect 8 0 21 0;
#X connect 9 0 22 0;
#X connect 10 0 23 0;
#X connect 11 0 24 0;
#X connect 12 0 25 0;
#X connect 13 0 28 0;
#X connect 14 0 28 0;
#X connect 15 0 28 0;
#X connect 16 0 28 0;
#X connect 17 0 28 0;
#X connect 18 0 28 0;
#X connect 19 0 28 0;
#X connect 20 0 28 0;
#X connect 21 0 28 0;
#X connect 22 0 28 0;
#X connect 23 0 28 0;
#X connect 24 0 28 0;
#X connect 25 0 28 0;
#X connect 26 0 27 0;
#X connect 27 0 28 0;
#X connect 28 0 30 0;
#X connect 30 0 29 0;
#X connect 30 1 29 0;
#X restore 49 158 pd generate digital out messages;
#X obj 319 109 tgl 25 0 empty empty ALL 2 12 0 12 -262144 -1 -1 0 1
;
#X obj 319 70 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 16383
;
#X obj 319 88 metro 100;
#X obj 49 280 send \$0-arduino;
#X text 143 197 <-- this is the message format;
#X text 181 69 strobe all pins -->;
#X connect 3 0 22 0;
#X connect 4 0 18 7;
#X connect 5 0 18 8;
#X connect 6 0 18 9;
#X connect 7 0 18 10;
#X connect 8 0 18 11;
#X connect 9 0 18 12;
#X connect 10 0 18 13;
#X connect 11 0 18 0;
#X connect 12 0 18 1;
#X connect 13 0 18 2;
#X connect 14 0 18 3;
#X connect 15 0 18 4;
#X connect 16 0 18 5;
#X connect 17 0 18 6;
#X connect 18 0 3 0;
#X connect 19 0 10 0;
#X connect 19 0 9 0;
#X connect 19 0 8 0;
#X connect 19 0 7 0;
#X connect 19 0 6 0;
#X connect 19 0 5 0;
#X connect 19 0 4 0;
#X connect 19 0 17 0;
#X connect 19 0 16 0;
#X connect 19 0 15 0;
#X connect 19 0 14 0;
#X connect 19 0 13 0;
#X connect 19 0 12 0;
#X connect 19 0 11 0;
#X connect 20 0 21 0;
#X connect 21 0 19 0;
#X restore 61 428 pd DIGITAL-OUTPUT;
#N canvas 494 94 562 264 DIGITAL-INPUT 0;
#X obj 46 128 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 2;
#X obj 64 128 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 4;
#X obj 82 128 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 8;
#X obj 100 128 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 16
;
#X obj 119 128 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 32
;
#X obj 137 128 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 64
;
#X obj 155 128 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 128
;
#X obj 173 128 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 256
;
#X obj 191 128 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 512
;
#X obj 209 128 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1024
;
#X obj 227 128 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 2048
;
#X obj 245 128 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 4096
;
#X obj 263 128 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 8192
;
#X obj 28 128 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 28 49 r \$0-arduino-out;
#X text 301 75 connect the Digital Input;
#X text 301 92 to the ground (=0) or to;
#X text 301 109 the positive voltage (=1);
#X text 27 167 NOTE: if you don't connect your pin neither to + nor
to the ground \, you will get random values (0 or 1) - to avoid that
\, you could connect all the pins to the ground !;
#X text 28 14 NOTE: don't forget to set pins to input mode first!;
#X obj 28 93 route 0 1 2 3 4 5 6 7 8 9 10 11 12 13;
#X obj 28 71 route digital;
#X connect 14 0 21 0;
#X connect 20 0 13 0;
#X connect 20 1 0 0;
#X connect 20 2 1 0;
#X connect 20 3 2 0;
#X connect 20 4 3 0;
#X connect 20 5 4 0;
#X connect 20 6 5 0;
#X connect 20 7 6 0;
#X connect 20 8 7 0;
#X connect 20 9 8 0;
#X connect 20 10 9 0;
#X connect 20 11 10 0;
#X connect 20 12 11 0;
#X connect 20 13 12 0;
#X connect 21 0 20 0;
#X restore 68 404 pd DIGITAL-INPUT;
#X text 545 229 (0=input \, 1=output);
#X obj 309 202 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 327 202 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 345 202 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 363 202 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 381 202 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 399 202 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 417 202 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 435 202 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 453 202 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 1;
#X obj 471 202 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1
;
#X obj 489 202 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 1
;
#X obj 507 202 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 1
;
#X obj 525 202 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 1
;
#X obj 551 182 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0
1;
#X text 550 167 all;
#X obj 291 202 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1;
#N canvas 365 337 770 320 send-to-arduino---------------- 0;
#X obj 49 54 inlet;
#X obj 89 54 inlet;
#X obj 128 54 inlet;
#X obj 168 54 inlet;
#X obj 208 54 inlet;
#X obj 248 54 inlet;
#X obj 287 54 inlet;
#X obj 327 54 inlet;
#X obj 368 53 inlet;
#X obj 408 53 inlet;
#X obj 447 53 inlet;
#X obj 487 53 inlet;
#X obj 527 53 inlet;
#X msg 49 96 pinMode 0 \$1;
#X msg 89 118 pinMode 1 \$1;
#X msg 128 140 pinMode 2 \$1;
#X msg 168 160 pinMode 3 \$1;
#X msg 208 92 pinMode 4 \$1;
#X msg 248 114 pinMode 5 \$1;
#X msg 287 136 pinMode 6 \$1;
#X msg 327 156 pinMode 7 \$1;
#X msg 368 88 pinMode 8 \$1;
#X msg 408 110 pinMode 9 \$1;
#X msg 447 132 pinMode 10 \$1;
#X msg 487 152 pinMode 11 \$1;
#X msg 527 80 pinMode 12 \$1;
#X obj 566 53 inlet;
#X msg 566 100 pinMode 13 \$1;
#X obj 305 226 outlet;
#X connect 0 0 13 0;
#X connect 1 0 14 0;
#X connect 2 0 15 0;
#X connect 3 0 16 0;
#X connect 4 0 17 0;
#X connect 5 0 18 0;
#X connect 6 0 19 0;
#X connect 7 0 20 0;
#X connect 8 0 21 0;
#X connect 9 0 22 0;
#X connect 10 0 23 0;
#X connect 11 0 24 0;
#X connect 12 0 25 0;
#X connect 13 0 28 0;
#X connect 14 0 28 0;
#X connect 15 0 28 0;
#X connect 16 0 28 0;
#X connect 17 0 28 0;
#X connect 18 0 28 0;
#X connect 19 0 28 0;
#X connect 20 0 28 0;
#X connect 21 0 28 0;
#X connect 22 0 28 0;
#X connect 23 0 28 0;
#X connect 24 0 28 0;
#X connect 25 0 28 0;
#X connect 26 0 27 0;
#X connect 27 0 28 0;
#X restore 291 229 pd send-to-arduino----------------;
#X msg 314 255 pinMode 13 1;
#X text 432 255 set pin 13 to output mode;
#X text 290 149 Set input/output mode of the pins for digital IO:;
#N canvas 374 455 500 352 ANALOG-INPUT 0;
#X obj 29 59 r \$0-arduino-out;
#X obj 29 97 spigot 0;
#X obj 91 94 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1
;
#X obj 29 139 route analog0 analog1 analog2 analog3 analog4 analog5
;
#X floatatom 29 220 5 0 0 3 analog0 - -;
#X floatatom 102 219 5 0 0 3 analog1 - -;
#X floatatom 175 219 5 0 0 3 analog2 - -;
#X floatatom 248 220 5 0 0 3 analog3 - -;
#X floatatom 321 220 5 0 0 3 analog4 - -;
#X floatatom 395 221 5 0 0 3 analog5 - -;
#N canvas 400 102 666 140 speed-limiting-to-save-cpu------------------------
0;
#X obj 19 31 inlet;
#X obj 19 55 speedlim 100;
#X obj 19 79 outlet;
#X obj 119 31 inlet;
#X obj 119 55 speedlim 100;
#X obj 119 79 outlet;
#X obj 219 31 inlet;
#X obj 219 55 speedlim 100;
#X obj 219 79 outlet;
#X obj 319 31 inlet;
#X obj 319 55 speedlim 100;
#X obj 319 79 outlet;
#X obj 419 31 inlet;
#X obj 419 55 speedlim 100;
#X obj 419 79 outlet;
#X obj 519 31 inlet;
#X obj 519 55 speedlim 100;
#X obj 519 79 outlet;
#X connect 0 0 1 0;
#X connect 1 0 2 0;
#X connect 3 0 4 0;
#X connect 4 0 5 0;
#X connect 6 0 7 0;
#X connect 7 0 8 0;
#X connect 9 0 10 0;
#X connect 10 0 11 0;
#X connect 12 0 13 0;
#X connect 13 0 14 0;
#X connect 15 0 16 0;
#X connect 16 0 17 0;
#X restore 29 173 pd speed-limiting-to-save-cpu------------------------
;
#X text 30 24 Analog Inputs of the Arduino-Board:;
#X text 119 96 <- enable analog inputs;
#X text 25 283 NOTE: connect the analog pins that you don't use to
the ground \, if you want to avoid flickering of the values !;
#X connect 0 0 1 0;
#X connect 1 0 3 0;
#X connect 2 0 1 1;
#X connect 3 0 10 0;
#X connect 3 1 10 1;
#X connect 3 2 10 2;
#X connect 3 3 10 3;
#X connect 3 4 10 4;
#X connect 3 5 10 5;
#X connect 10 0 4 0;
#X connect 10 1 5 0;
#X connect 10 2 6 0;
#X connect 10 3 7 0;
#X connect 10 4 8 0;
#X connect 10 5 9 0;
#X restore 75 452 pd ANALOG-INPUT;
#N canvas 462 488 554 370 ANALOG-OUTPUT-PWM 0;
#X text 16 17 Analog Output \, PWM (Pulse Width Modulation);
#X text 16 53 With the help of PWM you can write analog values to the
pins 9 \, 10 \, 11 of your Arduino board.;
#X text 17 89 NOTE: don't forget to set the pins to output mode first
!;
#X msg 21 189 pwm 9 \$1;
#X obj 24 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6
1 10 -260818 -1 -1 0 1;
#X msg 31 234 pwm 9 off;
#X obj 21 258 s \$0-arduino;
#X text 29 215 disable PWM:;
#X obj 192 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
-6 1 10 -260818 -1 -1 0 1;
#X obj 189 258 s \$0-arduino;
#X text 197 215 disable PWM:;
#X obj 354 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
-6 1 10 -260818 -1 -1 0 1;
#X obj 351 258 s \$0-arduino;
#X text 359 215 disable PWM:;
#X text 21 133 PIN9:;
#X text 189 135 PIN10:;
#X text 351 135 PIN11:;
#X msg 189 189 pwm 10 \$1;
#X msg 199 234 pwm 10 off;
#X msg 351 189 pwm 11 \$1;
#X msg 361 234 pwm 11 off;
#X text 21 319 NOTE: it is possible to write as well on the other pins
to send software-PWM signals (will come soon ...);
#X connect 3 0 6 0;
#X connect 4 0 3 0;
#X connect 5 0 6 0;
#X connect 8 0 17 0;
#X connect 11 0 19 0;
#X connect 17 0 9 0;
#X connect 18 0 9 0;
#X connect 19 0 12 0;
#X connect 20 0 12 0;
#X restore 40 477 pd ANALOG-OUTPUT-PWM;
#X text 25 357 With the Arduino-Board you can do digital and analog
input and output \, as descriped in the following sub-patches:;
#X text 191 427 <- example of Digital Output;
#X text 191 405 <- example of Digital Input;
#X text 191 453 <- example of Analog Input;
#X text 191 478 <- example of Analog Output;
#X text 259 30 Arduino Interface For PD;
#X text 286 4 ::::_PDUINO_::::;
#X text 458 547 2006 \, released under GNU GPL \; Gerda Strobl \, Georg
Holzmann;
#X text 91 261 <- list devices;
#X obj 484 87 spigot;
#X obj 515 65 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0
1;
#X obj 291 324 send \$0-arduino;
#X obj 344 111 send \$0-arduino-out;
#X obj 344 67 receive \$0-arduino;
#X obj 16 294 send \$0-arduino;
#N canvas 0 22 462 312 GETTING-INFO 0;
#X msg 147 65 version;
#X msg 207 65 info;
#X obj 147 107 send \$0-arduino-out;
#X obj 146 146 receive \$0-arduino;
#X obj 146 177 route version;
#X obj 105 221 unpack 0 0;
#X floatatom 105 245 5 0 0 0 - - -;
#X floatatom 170 245 5 0 0 0 - - -;
#X connect 0 0 2 0;
#X connect 1 0 2 0;
#X connect 3 0 4 0;
#X connect 4 0 5 0;
#X connect 5 0 6 0;
#X connect 5 1 7 0;
#X restore 75 501 pd GETTING-INFO;
#X text 191 502 <- example of getting status data;
#N canvas 0 22 467 269 SWITCHING-INPUTS 0;
#X obj 78 197 send \$0-arduino;
#X text 25 32 how many analogIns to enable:;
#X obj 161 99 tgl 15 1 empty empty empty 0 -6 0 8 -257472 -1 -1 0 1
;
#X text 184 98 enable/disable digitalIns;
#X msg 161 117 digitalIns \$1;
#X msg 26 78 analogIns 0;
#N canvas 162 133 570 420 serin 0;
#X obj 165 61 cnv 15 15 15 empty \$0-analog-number-canvas 0 4 8 0 14
-233017 -1 0;
#X obj 60 61 hradio 15 1 1 7 empty empty empty 0 -6 0 8 -225280 -1
-1 0;
#X obj 60 13 inlet;
#X msg 200 202 label \$1;
#X obj 200 180 makefilename %d;
#X obj 59 108 int;
#X obj 200 225 send \$0-analog-number-canvas;
#X obj 59 337 outlet;
#X msg 60 210 analogIns \$1;
#X msg 201 306 set \$1 \$2;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X connect 1 0 5 0;
#X connect 2 0 1 0;
#X connect 3 0 6 0;
#X connect 4 0 3 0;
#X connect 5 0 4 0;
#X connect 5 0 8 0;
#X connect 8 0 10 0;
#X connect 9 0 7 0;
#X connect 10 0 7 0;
#X connect 10 1 11 0;
#X connect 11 0 9 0;
#X coords 0 -1 1 1 121 17 1 60 60;
#X restore 26 49 pd serin;
#X connect 2 0 4 0;
#X connect 4 0 0 0;
#X connect 5 0 0 0;
#X connect 6 0 5 0;
#X restore 47 526 pd SWITCHING-INPUTS;
#X obj 484 111 print STATUS;
#X text 191 526 <- example of switching inputs on and off;
#X msg 373 297 digital 13 \$1;
#X obj 373 279 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
1;
#X text 474 295 toggle pin 13 on and off;
#X obj 344 90 arduino 1;
#X msg 38 260 devices;
#X text 71 232 <- info for current connection;
#X connect 3 0 4 0;
#X connect 3 0 5 0;
#X connect 4 0 48 0;
#X connect 6 0 48 0;
#X connect 7 0 48 0;
#X connect 12 0 28 1;
#X connect 13 0 28 2;
#X connect 14 0 28 3;
#X connect 15 0 28 4;
#X connect 16 0 28 5;
#X connect 17 0 28 6;
#X connect 18 0 28 7;
#X connect 19 0 28 8;
#X connect 20 0 28 9;
#X connect 21 0 28 10;
#X connect 22 0 28 11;
#X connect 23 0 28 12;
#X connect 24 0 28 13;
#X connect 25 0 24 0;
#X connect 25 0 23 0;
#X connect 25 0 22 0;
#X connect 25 0 21 0;
#X connect 25 0 20 0;
#X connect 25 0 19 0;
#X connect 25 0 18 0;
#X connect 25 0 17 0;
#X connect 25 0 16 0;
#X connect 25 0 15 0;
#X connect 25 0 14 0;
#X connect 25 0 13 0;
#X connect 25 0 12 0;
#X connect 25 0 27 0;
#X connect 27 0 28 0;
#X connect 28 0 45 0;
#X connect 29 0 45 0;
#X connect 43 0 52 0;
#X connect 44 0 43 1;
#X connect 47 0 57 0;
#X connect 54 0 45 0;
#X connect 55 0 54 0;
#X connect 57 0 46 0;
#X connect 57 1 43 0;
#X connect 58 0 48 0;