merged all READMEs into one

svn path=/trunk/externals/unauthorized/; revision=15178

1 files changed, 0 insertions, 108 deletions

diff --git a/mp3cast~/README b/mp3cast~/README
deleted file mode 100644
index 7247f81..0000000
--- a/mp3cast~/README
+++ /dev/null
@@ -1,108 +0,0 @@
-Version 0.01 
-copyright (c) 2001 by Olaf Matthes
-ported to Linux by Yves Degoyon
-
-mp3cast~.dll is a MPEG I Layer III (mp3) streaming external for pd (by Miller 
-Puckette) that connects to a SHOUTcast or IceCast server.
-
-To install mp3cast~, follow the steps from INSTALL
-
-This software is published under GPL terms.
-
-This is software with ABSOLUTELY NO WARRANTY.
-Use it at your OWN RISK. It's possible to damage e.g. hardware or your hearing
-due to a bug or for other reasons. 
-We do not warrant that the program is free of infringement of any third-party
-patents.
-
-*****************************************************************************
-
-mp3cast~ has been compiled for Linux using LAME 3.92.
-The newest version of LAME can be found at sourceforge.net
-
-COPYING: you may use this source under GPL terms!
-
-PLEASE NOTE: This software may contain patented alogrithm (at least
-  patented in some countries). It may be not allowed to sell/use products
-  based on this source code in these countries. Check this out first!
-
-COPYRIGHT of MP3 music:
-  Please note, that the duplicating of copyrighted music without explicit
-  permission violates the rights of the owner.
-
-*****************************************************************************
-
-	using mp3cast~ external for Pure Data
-
-Open the help-mp3cast~.pd to understand how it works.
-In this patch, you must send the messages to mp3cast~ 
-in the following order :
-
-1/ password ***** 
-2/ icecast | mp3cast
-3/ connect host port
-4/ pd dsp 1
-
-Parameters sent to mp3cast~ object :
-
-  Sampling Rate (Hz): 
-Possible values are 48000, 44100 and 32000. If Pd runs at a different sampling 
-rate, LAME will resample the signal. Default value for mp3 sampling rate is Pd's 
-sampling rate.
-
-  Bitrate (kbit/s): 
-Possible values are 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 
-and 320. Default is 224.
-
-  Mode: 
-Possible values are 0 (stereo), 1 (joint stereo, the default), 2 (dual channel) 
-and 3 (mono).
-
-  Password:
-The default is 'pd', can be changed with a message "passwd yourpassword".
-
-  Server:
-Use message "connect name_of_your_server.com port" to connect (same as with 
-Pd's netsend). 'port' is the number specified in the server's config file. 
-Attention (for SHOUTcast users): The actual port number used is one higher! 
-Standard would be 8000 resulting in a socket at port 8001!!! Bare this in mind 
-when configuring proxys or using mp3cast~ in connection with netsend / 
-netreceive. For IceCast, the port number used is the same as specified.
-
-  Outlet:
-The outlet outputs an int, 1 if connected to SHOUTcast server, 0 if not. This could 
-be used to build an automatic reconnect mechanism.
-
-  Other things:
-mp3cast~ prints the current status (connection, login, LAME status) to the pd 
-window. To see the current settings, send it a message "print" and mp3 settings 
-will be displayed.
-Note that changing any mp3 settings will require to disconnect and reconnect again!
-This has to be done manually. 
-
-  Known problems:
-If you turn off audio processing when you are connected with the server, no data will 
-be sent to it. This will make the server disconnect after a certain time ('no data' 
-error in server log). mp3cast~ does not recongnise this and attempts to keep on
-streaming. To avoid this set 'AutoDumpSourceTime' in the servers config file to a 
-fairly high value preventing the server from closing the socket to fast.
-
-ALLOWED QUALITY FACTOR :
-
-    -q <arg>        <arg> = 0...9.  Default  -q 5 
-                    -q 0:  Highest quality, very slow 
-                    -q 9:  Poor quality, but fast 
-    -h              Same as -q 2.   Recommended.
-    -f              Same as -q 7.   Fast, ok quality
-
-ALLOWED SAMPLERATE/BITRATES
-
-MPEG-1   layer III sample frequencies (kHz):  32  48  44.1
-bitrates (kbps): 32 40 48 56 64 80 96 112 128 160 192 224 256 320
-
-MPEG-2   layer III sample frequencies (kHz):  16  24  22.05
-bitrates (kbps):  8 16 24 32 40 48 56 64 80 96 112 128 144 160
-
-MPEG-2.5 layer III sample frequencies (kHz):   8  12  11.025
-bitrates (kbps):  8 16 24 32 40 48 56 64 80 96 112 128 144 160
-