added files straight from Yves' sources

svn path=/trunk/externals/unauthorized/; revision=864

1 files changed, 94 insertions, 0 deletions

diff --git a/mp3write~/README b/mp3write~/README
new file mode 100644
index 0000000..3b43bbe
--- /dev/null
+++ b/mp3write~/README
@@ -0,0 +1,94 @@
+Version 0.01 
+copyright (c) 2001 by Yves Degoyon
+
+mp3write~.dll is a MPEG I Layer III (mp3) file writer.
+
+To install mp3write~, follow the steps from INSTALL
+
+This software is published under GPL terms.
+
+This is software with ABSOLUTELY NO WARRANTY.
+Use it at your OWN RISK. It's possible to damage e.g. hardware or your hearing
+due to a bug or for other reasons. 
+We do not warrant that the program is free of infringement of any third-party
+patents.
+
+*****************************************************************************
+
+mp3write~ has been compiled for Linux using LAME 3.92.
+The newest version of LAME can be found via freshmeat.net
+
+COPYING: you may use this source under GPL terms!
+
+PLEASE NOTE: This software may contain patented alogrithm (at least
+  patented in some countries). It may be not allowed to sell/use products
+  based on this source code in these countries. Check this out first!
+
+COPYRIGHT of MP3 music:
+  Please note, that the duplicating of copyrighted music without explicit
+  permission violates the rights of the owner.
+
+*****************************************************************************
+
+	using mp3write~ external for Pure Data
+
+Open the test-mp3write~.pd to understand how it works.
+In this patch, you must send the messages to mp3write~ 
+in the following order :
+
+1/ append|truncate if you wish to change file creation options ( default is append )
+2/ open /my/file 
+3/ start
+5/ pd dsp 1
+4/ stop : the tag is written at this stage
+
+Parameters sent to mp3write~ object :
+
+  Sampling Rate (Hz): 
+Possible values are 48000, 44100 and 32000. If Pd runs at a different sampling 
+rate, LAME will resample the signal. Default value for mp3 sampling rate is Pd's 
+sampling rate.
+
+  Bitrate (kbit/s): 
+Possible values are 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 
+and 320. Default is 224.
+
+  Mode: 
+Possible values are 0 (stereo), 1 (joint stereo, the default), 2 (dual channel) 
+and 3 (mono).
+
+  Outlet:
+The outlet outputs an int, which the number of bytes written in this session.
+this might be different from file size if you're using append mode.
+
+
+  Known Problems :
+
+All combinations of samplerate, bitrate, quality factor will not be accepted.
+
+ALLOWED QUALITY FACTOR :
+
+    -q <arg>        <arg> = 0...9.  Default  -q 5 
+                    -q 0:  Highest quality, very slow 
+                    -q 9:  Poor quality, but fast 
+    -h              Same as -q 2.   Recommended.
+    -f              Same as -q 7.   Fast, ok quality
+
+ALLOWED SAMPLERATE/BITRATES
+
+MPEG-1   layer III sample frequencies (kHz):  32  48  44.1
+bitrates (kbps): 32 40 48 56 64 80 96 112 128 160 192 224 256 320
+
+MPEG-2   layer III sample frequencies (kHz):  16  24  22.05
+bitrates (kbps):  8 16 24 32 40 48 56 64 80 96 112 128 144 160
+
+MPEG-2.5 layer III sample frequencies (kHz):   8  12  11.025
+bitrates (kbps):  8 16 24 32 40 48 56 64 80 96 112 128 144 160
+
+Furthermore, it seems that high quality factors will not work
+with this release of lame ( 3.92 ).
+The same errors can be obtained with the command line :
+lame -q 1 file.wav
+outputs errors and mp3write can't do better.
+
+