This commit was generated by cvs2svn to compensate for changes in r610,

which included commits to RCS files with non-trunk default branches.

svn path=/trunk/; revision=611

1 files changed, 113 insertions, 0 deletions

diff --git a/pd/doc/3.audio.examples/C07.envelope.follower.pd b/pd/doc/3.audio.examples/C07.envelope.follower.pd
new file mode 100644
index 00000000..51f8f56b
--- /dev/null
+++ b/pd/doc/3.audio.examples/C07.envelope.follower.pd
@@ -0,0 +1,113 @@
+#N canvas 66 7 617 909 12;
+#X text 164 5 ENVELOPE FOLLOWERS;
+#X text 10 25 The env~ object reports ths RMS signal level over the
+last 256 samples (by default) or any other power of 2 that's at least
+twice the block size. The analysis is done in an overlapped fashion
+so that results appear every N/2 points if N is the analysis window
+size. So the larger the window \, the stabler the result and the less
+frequently it appears. Computation time doesn't depend heavily on N.
+;
+#X text 11 135 Envelope followers are frequently used to detect attacks
+and periods of silence. (There are fancier attack detectors out there
+\, though.) Here is a simple threshold-based attack and rest detector.
+;
+#X obj 102 297 dbtorms;
+#X obj 23 293 osc~ 440;
+#X obj 23 339 env~;
+#X floatatom 78 329 0 0 0 0 - - -;
+#X floatatom 102 274 0 0 0 0 - - -;
+#X msg 451 320 \; pd dsp 1;
+#X obj 119 380 t b f;
+#X floatatom 119 403 0 0 0 0 - - -;
+#X obj 126 458 pack;
+#X obj 126 481 route 0 1;
+#X obj 126 504 > 55;
+#X obj 176 504 < 45;
+#X obj 126 527 sel 1;
+#X obj 176 527 sel 1;
+#X msg 90 538 1;
+#X msg 90 516 0;
+#X obj 126 564 print attack;
+#X obj 119 435 != 0;
+#X obj 24 612 t b f;
+#X floatatom 15 638 0 0 0 0 - - -;
+#X obj 27 688 pack;
+#X obj 27 711 route 0 1;
+#X obj 27 749 sel 1;
+#X msg 6 856 1;
+#X msg 7 879 0;
+#X obj 20 666 != 0;
+#X obj 58 639 < 45;
+#X obj 31 783 timer;
+#X obj 113 712 sel 0;
+#X obj 95 832 sel 0;
+#X obj 45 832 sel 1;
+#X obj 45 873 print rest;
+#X obj 31 806 > 1000;
+#X text 162 403 state -- 1 if waiting for low threshold \,;
+#X text 199 418 0 if we've attained it and now want the;
+#X text 202 434 high one.;
+#X text 209 480 route the RMS value according to state;
+#X text 239 506 if off \, 55 dB means attack. If on \, 45;
+#X text 240 527 dB or less means state changes to off.;
+#X text 132 359 ATTACK DETECTION;
+#X text 40 594 REST DETECTION;
+#X text 100 637 Here we always will test RMS against a low value;
+#X text 125 654 but as before we route the result according to;
+#X text 147 671 our state \, 1 if "resting" \, 0 if not.;
+#X text 163 709 regardless of state \, when RMS isn't low;
+#X text 185 724 reset the timer;
+#X text 202 846 RMS isn't low enough.;
+#X text 120 744 If we're not in rest \, and the RMS is low \,;
+#X text 143 761 check elapsed time sinse RMS last wasn't low.;
+#X text 122 802 If more than 1 second \, report a rest.;
+#X text 170 828 If we're at rest \, pop out of it when;
+#X text 11 201 Both detectors are state machines with two states \,
+on and off. If on \, a test is run to determine whether to turn off
+\, and vice versa. The tests are run at each output of the rms~ object.
+;
+#X text 355 884 updated for Pd version 0.37;
+#X text 109 320 note 3.01 dB difference between;
+#X text 113 336 peak and RMS amplitudes.;
+#X obj 451 297 loadbang;
+#X obj 23 316 *~;
+#X connect 3 0 59 1;
+#X connect 4 0 59 0;
+#X connect 5 0 6 0;
+#X connect 5 0 9 0;
+#X connect 5 0 21 0;
+#X connect 7 0 3 0;
+#X connect 9 0 10 0;
+#X connect 9 1 11 1;
+#X connect 10 0 20 0;
+#X connect 11 0 12 0;
+#X connect 12 0 13 0;
+#X connect 12 1 14 0;
+#X connect 13 0 15 0;
+#X connect 14 0 16 0;
+#X connect 15 0 17 0;
+#X connect 15 0 19 0;
+#X connect 16 0 18 0;
+#X connect 17 0 10 0;
+#X connect 18 0 10 0;
+#X connect 20 0 11 0;
+#X connect 21 0 22 0;
+#X connect 21 1 29 0;
+#X connect 22 0 28 0;
+#X connect 23 0 24 0;
+#X connect 24 0 25 0;
+#X connect 24 1 32 0;
+#X connect 25 0 30 1;
+#X connect 26 0 22 0;
+#X connect 27 0 22 0;
+#X connect 28 0 23 0;
+#X connect 29 0 23 1;
+#X connect 29 0 31 0;
+#X connect 30 0 35 0;
+#X connect 31 0 30 0;
+#X connect 32 0 27 0;
+#X connect 33 0 26 0;
+#X connect 33 0 34 0;
+#X connect 35 0 33 0;
+#X connect 58 0 8 0;
+#X connect 59 0 5 0;