diff options
Diffstat (limited to 'externals/grill/flext')
35 files changed, 1363 insertions, 56 deletions
diff --git a/externals/grill/flext/AUTHORS b/externals/grill/flext/AUTHORS new file mode 100644 index 00000000..677d3b0e --- /dev/null +++ b/externals/grill/flext/AUTHORS @@ -0,0 +1 @@ +Thomas Grill
\ No newline at end of file diff --git a/externals/grill/flext/ChangeLog b/externals/grill/flext/ChangeLog new file mode 100644 index 00000000..74b4ae7f --- /dev/null +++ b/externals/grill/flext/ChangeLog @@ -0,0 +1 @@ +see changes.txt diff --git a/externals/grill/flext/INSTALL b/externals/grill/flext/INSTALL new file mode 100644 index 00000000..b42a17ac --- /dev/null +++ b/externals/grill/flext/INSTALL @@ -0,0 +1,182 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. diff --git a/externals/grill/flext/Makefile.am b/externals/grill/flext/Makefile.am index 9bcf5bb0..0cf89b38 100755 --- a/externals/grill/flext/Makefile.am +++ b/externals/grill/flext/Makefile.am @@ -3,8 +3,6 @@ # added by tim blechmann # -SUBDIRS = source +SUBDIRS = source tutorial -EXTRA_DIST = flext.doxy # examples tutorial - -AUTOMAKE_OPTIONS = foreign
\ No newline at end of file +EXTRA_DIST = flext.doxy
\ No newline at end of file diff --git a/externals/grill/flext/NEWS b/externals/grill/flext/NEWS new file mode 100644 index 00000000..e69de29b --- /dev/null +++ b/externals/grill/flext/NEWS diff --git a/externals/grill/flext/README b/externals/grill/flext/README new file mode 100644 index 00000000..a115b5a9 --- /dev/null +++ b/externals/grill/flext/README @@ -0,0 +1 @@ +see readme.txt diff --git a/externals/grill/flext/configure.ac b/externals/grill/flext/configure.ac index 4c0a0057..e8e53e13 100755 --- a/externals/grill/flext/configure.ac +++ b/externals/grill/flext/configure.ac @@ -7,19 +7,23 @@ dnl flext API version (current:release:age) API_VERSION=0:0:0 AC_INIT([flext],[0.4.7],[gr@grrrr.org],[flext]) -AM_INIT_AUTOMAKE(1.6) +AM_INIT_AUTOMAKE(1.8) dnl configure options AC_ARG_ENABLE(system, [ --enable-system flext system (default: pd)], [ case $enableval in - max) AC_DEFINE(FLEXT_SYS,1);; - *) AC_DEFINE(FLEXT_SYS,2);; + max) AC_DEFINE(FLEXT_SYS,1) + TARGETDIR=maxmsp;; + *) AC_DEFINE(FLEXT_SYS,2) + TARGETDIR=pd;; esac system = $enableval ], - AC_DEFINE(FLEXT_SYS,2)) + AC_DEFINE(FLEXT_SYS,2) + TARGETDIR=pd +) AC_ARG_WITH(sysdir, [ --with-sysdir path to pd or max headers], @@ -96,30 +100,24 @@ dnl Checks for library functions. dnl system specific -if test $(uname -s) == Linux ; then +if test `uname -s` == Linux; then DYNAMIC_LDFLAGS="-Wl,-Bdynamic" - PDEXT=pd_linux + EXTENSION=pd_linux SOEXT=so fi -if test $(uname -s) == Darwin ; then - DYNAMIC_LDFLAGS="-version-info $API_VERSION -release $AC_PACKAGE_VERSION -dylib -dynamic -flat_namespace -undefined suppress" - if test $system == max ; then - PDEXT=mxo - SOEXT=dylib - FRAMEWORKS=vecLib maxlib maxaudio +if test `uname -s` == Darwin; then + DYNAMIC_LDFLAGS = "-version-info $API_VERSION -release $AC_PACKAGE_VERSION -dylib -dynamic -flat_namespace -undefined suppress" + + if test $system = max; then + echo "what's the name in max???" #EXEEXT = ??? else - PDEXT=pd_darwin + EXTENSION=pd_darwin SOEXT=dylib - FRAMEWORKS=vecLib + FRAMEWORKS=??? fi fi -dnl else -dnl echo "Platform NOT supported" -dnl exit 1 -dnl fi - dnl todo: mingw / cygwin AC_SUBST(INCLUDEDIR) @@ -127,10 +125,33 @@ AC_SUBST(OPT_FLAGS) AC_SUBST(DYNAMIC_LDFLAGS) AC_SUBST(stkdir) AC_SUBST(sndobjdir) -AC_SUBST(PDEXT) +AC_SUBST(EXTENSION) AC_SUBST(SOEXT) +AC_SUBST(TARGETDIR) AC_SUBST(FRAMEWORKS) dnl for osx AC_OUTPUT([ Makefile tutorial/Makefile + tutorial/adv1/Makefile + tutorial/adv2/Makefile + tutorial/adv3/Makefile + tutorial/attr1/Makefile + tutorial/attr2/Makefile + tutorial/attr3/Makefile + tutorial/bind1/Makefile + tutorial/buffer1/Makefile + tutorial/lib1/Makefile + tutorial/signal1/Makefile + tutorial/signal2/Makefile + tutorial/simple1/Makefile + tutorial/simple2/Makefile + tutorial/simple3/Makefile + tutorial/sndobj1/Makefile + tutorial/stk1/Makefile + tutorial/stk2/Makefile + tutorial/thread1/Makefile + tutorial/thread2/Makefile + tutorial/timer1/Makefile + tutorial/pd/Makefile + tutorial/maxmsp/Makefile source/Makefile]) diff --git a/externals/grill/flext/flext.vcproj b/externals/grill/flext/flext.vcproj index 6061ce62..7bf7e75f 100644 --- a/externals/grill/flext/flext.vcproj +++ b/externals/grill/flext/flext.vcproj @@ -352,7 +352,7 @@ <Tool Name="VCPostBuildEventTool" Description="copy flext to vibrez" - CommandLine="copy F:\prog\max\flext\pd-msvc\flext_d.dll f:\prog\vibrez\debug"/> + CommandLine="copy F:\pdmax\flext\pd-msvc\flext_d.dll f:\vibrez\debug"/> <Tool Name="VCPreBuildEventTool"/> <Tool @@ -416,10 +416,10 @@ <Tool Name="VCPostBuildEventTool" Description="copy flext to vibrez" - CommandLine="copy F:\prog\max\flext\source\*.h f:\prog\vibrez\api\include -copy F:\prog\max\flext\pd-msvc\flext_l.lib f:\prog\vibrez\api\lib -copy F:\prog\max\flext\pd-msvc\flext.dll f:\prog\vibrez\release -copy F:\prog\max\flext\pd-msvc\flext.dll f:\prog\dll + CommandLine="copy F:\pdmax\flext\source\*.h f:\vibrez\api\include +copy F:\pdmax\flext\pd-msvc\flext_l.lib f:\vibrez\api\lib +copy F:\pdmax\flext\pd-msvc\flext.dll f:\vibrez\release +copy F:\pdmax\flext\pd-msvc\flext.dll f:\prog\dll "/> <Tool Name="VCPreBuildEventTool"/> diff --git a/externals/grill/flext/source/Makefile.am b/externals/grill/flext/source/Makefile.am index 49f0b5f7..0429724f 100755 --- a/externals/grill/flext/source/Makefile.am +++ b/externals/grill/flext/source/Makefile.am @@ -54,59 +54,70 @@ pkginclude_HEADERS = \ fldefs_attradd.h -if SNDOBJ +# handling for stk / sndobj +SRCS_STK = flstk.cpp +HDRS_STK = flstk.cpp + SRCS_SNDOBJ = flsndobj.cpp HDRS_SNDOBJ = flsndobj.cpp -LIB_SNDOBJ = -lsndobj + +if SNDOBJ +SRCS_FLEXT += $(SRCS_SNDOBJ) +pkginclude_HEADERS += $(HDRS_SNDOBJ) +LIB_SNDOBJ = -lsndobj endif if STK -SRCS_STK = flstk.cpp -HDRS_STK = flstk.cpp -LIB_STK = -lstk +SRCS_FLEXT += $(SRCS_STK) +pkginclude_HEADERS += $(HDRS_STK) +LIB_STK = -lstk endif -pkginclude_HEADERS += $(HDRS_SNDOBJ) $(HDRS_STK) FRAMEWORKS = @FRAMEWORKS@ - # for static libraries we can use automake -libflext_a_SOURCES = $(SRCS_FLEXT) $(SRCS_SNDOBJ) $(SRCS_STK) -libflext_d_a_SOURCES = $(SRCS_FLEXT) $(SRCS_SNDOBJ) $(SRCS_STK) -libflext_t_a_SOURCES = $(SRCS_FLEXT) $(SRCS_SNDOBJ) $(SRCS_STK) -libflext_td_a_SOURCES = $(SRCS_FLEXT) $(SRCS_SNDOBJ) $(SRCS_STK) +libflext_a_SOURCES = $(SRCS_FLEXT) +libflext_d_a_SOURCES = $(SRCS_FLEXT) +libflext_t_a_SOURCES = $(SRCS_FLEXT) +libflext_td_a_SOURCES = $(SRCS_FLEXT) libflext_a_CXXFLAGS = @OPT_FLAGS@ @INCLUDEDIR@ libflext_d_a_CXXFLAGS = @INCLUDEDIR@ -g -DFLEXT_DEBUG libflext_t_a_CXXFLAGS = @OPT_FLAGS@ @INCLUDEDIR@ -DFLEXT_THREADS libflext_td_a_CXXFLAGS = @INCLUDEDIR@ -g -DFLEXT_DEBUG -DFLEXT_THREADS -libflext_a_LDFLAGS_ = @OPT_FLAGS@ @INCLUDEDIR@ $(patsubst %,-framework %,$(FRAMEWORKS)) -libflext_d_a_LDFLAGS_ = @INCLUDEDIR@ -g -DFLEXT_DEBUG $(patsubst %,-framework %,$(FRAMEWORKS)) -libflext_t_a_LDFLAGS_ = @OPT_FLAGS@ @INCLUDEDIR@ -DFLEXT_THREADS $(patsubst %,-framework %,$(FRAMEWORKS)) -libflext_td_a_LDFLAGS_ = @INCLUDEDIR@ -g -DFLEXT_DEBUG -DFLEXT_THREADS $(patsubst %,-framework %,$(FRAMEWORKS)) +libflext_a_LDFLAGS = @OPT_FLAGS@ @INCLUDEDIR@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) +libflext_d_a_LDFLAGS = @INCLUDEDIR@ -g -DFLEXT_DEBUG \ + $(patsubst %,-framework %,$(FRAMEWORKS)) +libflext_t_a_LDFLAGS = @OPT_FLAGS@ @INCLUDEDIR@ -DFLEXT_THREADS \ + $(patsubst %,-framework %,$(FRAMEWORKS)) +libflext_td_a_LDFLAGS = @INCLUDEDIR@ -g -DFLEXT_DEBUG -DFLEXT_THREADS \ + $(patsubst %,-framework %,$(FRAMEWORKS)) # for shared libraries, we can't ... -libflext_la_CXXFLAGS = @OPT_FLAGS@ @INCLUDEDIR@ -DFLEXT_SHARED -DFLEXT_EXPORTS $(DEFS) -libflext_d_la_CXXFLAGS = @INCLUDEDIR@ -g -DFLEXT_DEBUG -DFLEXT_SHARED -DFLEXT_EXPORTS $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) - -libflext_la_LDFLAGS_ = @DYNAMIC_LDFLAGS@ $(LIB_STK) $(LIB_SNDOBJ) $(LDFLAGS) $(patsubst %,-framework %,$(FRAMEWORKS)) -libflext_d_la_LDFLAGS_ = @DYNAMIC_LDFLAGS@ $(LIB_STK) $(LIB_SNDOBJ) $(LDFLAGS) $(patsubst %,-framework %,$(FRAMEWORKS)) +libflext_la_CXXFLAGS = @OPT_FLAGS@ @INCLUDEDIR@ -DFLEXT_SHARED \ + -DFLEXT_EXPORTS $(DEFS) +libflext_d_la_CXXFLAGS = @INCLUDEDIR@ -g -DFLEXT_DEBUG -DFLEXT_SHARED \ + -DFLEXT_EXPORTS $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) +libflext_la_LDFLAGS = @DYNAMIC_LDFLAGS@ $(LIB_STK) $(LIB_SNDOBJ) $(LDFLAGS) \ + $(patsubst %,-framework %,$(FRAMEWORKS)) +libflext_d_la_LDFLAGS = @DYNAMIC_LDFLAGS@ $(LIB_STK) $(LIB_SNDOBJ) $(LDFLAGS) + $(patsubst %,-framework %,$(FRAMEWORKS)) libflext_la_NAME = libflext.@SOEXT@ libflext_d_la_NAME = libflext_d.@SOEXT@ - all-local: $(libflext_la_NAME) $(libflext_d_la_NAME) $(libflext_la_NAME): $(patsubst %.cpp,libflext_la-%.o,$(SRCS_FLEXT)) - $(CXX) -shared $(libflext_la_LDFLAGS_) $(LIBS) -o $(libflext_la_NAME) $^ + $(CXX) -shared $(libflext_la_LDFLAGS) $(LIBS) -o $(libflext_la_NAME) $^ -libflext_la-%.o: %.cpp +libflext_la-%.o : %.cpp $(CXX) -shared -c $(libflext_la_CXXFLAGS) $< -o $@ $(libflext_d_la_NAME): $(patsubst %.cpp,libflext_d_la-%.o,$(SRCS_FLEXT)) - $(CXX) -shared $(libflext_d_la_LDFLAGS_) $(LIBS) -o $(libflext_d_la_NAME) $^ + $(CXX) -shared $(libflext_d_la_LDFLAGS) $(LIBS) -o $(libflext_d_la_NAME) $^ libflext_d_la-%.o: %.cpp $(CXX) -shared -c $(libflext_d_la_CXXFLAGS) $< -o $@ diff --git a/externals/grill/flext/source/flattr.cpp b/externals/grill/flext/source/flattr.cpp index b40a5807..f4036949 100644 --- a/externals/grill/flext/source/flattr.cpp +++ b/externals/grill/flext/source/flattr.cpp @@ -120,7 +120,7 @@ void flext_base::ListAttrib(AtomList &la) const } } - la(list[0].size()+list[1].size()); + la((int)(list[0].size()+list[1].size())); int ix = 0; AttrList::iterator it; for(i = 0; i <= 1; ++i) diff --git a/externals/grill/flext/source/flmeth.cpp b/externals/grill/flext/source/flmeth.cpp index eaaca622..e0ecb172 100755 --- a/externals/grill/flext/source/flmeth.cpp +++ b/externals/grill/flext/source/flmeth.cpp @@ -115,7 +115,7 @@ void flext_base::ListMethods(AtomList &la,int inlet) const } } - la(list[0].size()+list[1].size()); + la((int)list[0].size()+(int)list[1].size()); int ix = 0; MethList::iterator it; for(i = 0; i <= 1; ++i) diff --git a/externals/grill/flext/source/flsupport.cpp b/externals/grill/flext/source/flsupport.cpp index b4c3d09f..9eec7abd 100644 --- a/externals/grill/flext/source/flsupport.cpp +++ b/externals/grill/flext/source/flsupport.cpp @@ -239,7 +239,7 @@ void flext_root::FreeAligned(void *blk) void flext::GetAString(const t_atom &a,char *buf,size_t szbuf) { #if FLEXT_SYS == FLEXT_SYS_PD - atom_string(const_cast<t_atom *>(&a),buf,szbuf); + atom_string(const_cast<t_atom *>(&a),buf,(int)szbuf); #else if(IsSymbol(a)) STD::strncpy(buf,GetString(a),szbuf); else if(IsFloat(a)) STD::snprintf(buf,szbuf,"%f",GetFloat(a)); diff --git a/externals/grill/flext/tutorial/Makefile.am b/externals/grill/flext/tutorial/Makefile.am new file mode 100644 index 00000000..0a119998 --- /dev/null +++ b/externals/grill/flext/tutorial/Makefile.am @@ -0,0 +1,56 @@ +# +# automake template +# added by tim blechmann +# + +SUBDIRS = \ + adv1 \ + adv2 \ + adv3 \ + attr1 \ + attr2 \ + attr3 \ + bind1 \ + buffer1 \ + lib1 \ + signal1 \ + signal2 \ + simple1 \ + simple2 \ + simple3 \ + sndobj1 \ + stk1 \ + stk2 \ + thread1 \ + thread2 \ + timer1 + + +EXTRA_DIST = \ + readme.txt \ + gpl.txt \ + tutorial.dsw \ + tutorial.sln + +DIST_SUBDIRS = pd \ + maxmsp \ + adv1 \ + adv2 \ + adv3 \ + attr1 \ + attr2 \ + attr3 \ + bind1 \ + buffer1 \ + lib1 \ + signal1 \ + signal2 \ + simple1 \ + simple2 \ + simple3 \ + sndobj1 \ + stk1 \ + stk2 \ + thread1 \ + thread2 \ + timer1 diff --git a/externals/grill/flext/tutorial/adv1/Makefile.am b/externals/grill/flext/tutorial/adv1/Makefile.am new file mode 100644 index 00000000..4bfe72f6 --- /dev/null +++ b/externals/grill/flext/tutorial/adv1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = adv1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/adv2/Makefile.am b/externals/grill/flext/tutorial/adv2/Makefile.am new file mode 100644 index 00000000..17ba9d45 --- /dev/null +++ b/externals/grill/flext/tutorial/adv2/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = adv2 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/adv3/Makefile.am b/externals/grill/flext/tutorial/adv3/Makefile.am new file mode 100644 index 00000000..e069be64 --- /dev/null +++ b/externals/grill/flext/tutorial/adv3/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = adv3 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/attr1/Makefile.am b/externals/grill/flext/tutorial/attr1/Makefile.am new file mode 100644 index 00000000..d8242700 --- /dev/null +++ b/externals/grill/flext/tutorial/attr1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = attr1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/attr2/Makefile.am b/externals/grill/flext/tutorial/attr2/Makefile.am new file mode 100644 index 00000000..e0fe461e --- /dev/null +++ b/externals/grill/flext/tutorial/attr2/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = attr2 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/attr3/Makefile.am b/externals/grill/flext/tutorial/attr3/Makefile.am new file mode 100644 index 00000000..c25aa864 --- /dev/null +++ b/externals/grill/flext/tutorial/attr3/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = attr3 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/bind1/Makefile.am b/externals/grill/flext/tutorial/bind1/Makefile.am new file mode 100644 index 00000000..a338451c --- /dev/null +++ b/externals/grill/flext/tutorial/bind1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = bind1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/buffer1/Makefile.am b/externals/grill/flext/tutorial/buffer1/Makefile.am new file mode 100644 index 00000000..76d31298 --- /dev/null +++ b/externals/grill/flext/tutorial/buffer1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = buffer1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/lib1/Makefile.am b/externals/grill/flext/tutorial/lib1/Makefile.am new file mode 100644 index 00000000..990a7ff3 --- /dev/null +++ b/externals/grill/flext/tutorial/lib1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = lib1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/maxmsp/Makefile.am b/externals/grill/flext/tutorial/maxmsp/Makefile.am new file mode 100644 index 00000000..63406221 --- /dev/null +++ b/externals/grill/flext/tutorial/maxmsp/Makefile.am @@ -0,0 +1,6 @@ +# +# automake template +# added by tim blechmann +# + +EXTRA_DIST = *.pat
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/pd/Makefile.am b/externals/grill/flext/tutorial/pd/Makefile.am new file mode 100644 index 00000000..d2f5ad4d --- /dev/null +++ b/externals/grill/flext/tutorial/pd/Makefile.am @@ -0,0 +1,6 @@ +# +# automake template +# added by tim blechmann +# + +EXTRA_DIST = *.pd
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/signal1/Makefile.am b/externals/grill/flext/tutorial/signal1/Makefile.am new file mode 100644 index 00000000..8d0b9ef5 --- /dev/null +++ b/externals/grill/flext/tutorial/signal1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = signal1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/signal2/Makefile.am b/externals/grill/flext/tutorial/signal2/Makefile.am new file mode 100644 index 00000000..6f246497 --- /dev/null +++ b/externals/grill/flext/tutorial/signal2/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = signal2 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/simple1/Makefile.am b/externals/grill/flext/tutorial/simple1/Makefile.am new file mode 100644 index 00000000..2d19d7ea --- /dev/null +++ b/externals/grill/flext/tutorial/simple1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = simple1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/simple2/Makefile.am b/externals/grill/flext/tutorial/simple2/Makefile.am new file mode 100644 index 00000000..777d2c95 --- /dev/null +++ b/externals/grill/flext/tutorial/simple2/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = simple2 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/simple3/Makefile.am b/externals/grill/flext/tutorial/simple3/Makefile.am new file mode 100644 index 00000000..41df9488 --- /dev/null +++ b/externals/grill/flext/tutorial/simple3/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = simple3 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/sndobj1/Makefile.am b/externals/grill/flext/tutorial/sndobj1/Makefile.am new file mode 100644 index 00000000..eb7ac446 --- /dev/null +++ b/externals/grill/flext/tutorial/sndobj1/Makefile.am @@ -0,0 +1,53 @@ +# +# automake template +# added by tim blechmann +# + +NAME = sndobj1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +if SNDOBJ +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra +endif
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/stk1/Makefile.am b/externals/grill/flext/tutorial/stk1/Makefile.am new file mode 100644 index 00000000..ea6e881a --- /dev/null +++ b/externals/grill/flext/tutorial/stk1/Makefile.am @@ -0,0 +1,52 @@ +# +# automake template +# added by tim blechmann +# + +NAME = stk1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +if STK +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra +endif
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/stk2/Makefile.am b/externals/grill/flext/tutorial/stk2/Makefile.am new file mode 100644 index 00000000..a5293c67 --- /dev/null +++ b/externals/grill/flext/tutorial/stk2/Makefile.am @@ -0,0 +1,52 @@ +# +# automake template +# added by tim blechmann +# + +NAME = stk2 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +if STK +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra +endif
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/thread1/Makefile.am b/externals/grill/flext/tutorial/thread1/Makefile.am new file mode 100644 index 00000000..fd5fd540 --- /dev/null +++ b/externals/grill/flext/tutorial/thread1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = thread1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/thread2/Makefile.am b/externals/grill/flext/tutorial/thread2/Makefile.am new file mode 100644 index 00000000..c361a450 --- /dev/null +++ b/externals/grill/flext/tutorial/thread2/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = thread2 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file diff --git a/externals/grill/flext/tutorial/timer1/Makefile.am b/externals/grill/flext/tutorial/timer1/Makefile.am new file mode 100644 index 00000000..b2ba30c1 --- /dev/null +++ b/externals/grill/flext/tutorial/timer1/Makefile.am @@ -0,0 +1,51 @@ +# +# automake template +# added by tim blechmann +# + +NAME = timer1 + +BUILT_SOURCES = main.cpp + +EXTRA_DIST = main.cpp \ + $(NAME).cw \ + $(NAME).dsp \ + $(NAME).vcproj + +CXXFLAGS = @CXXFLAGS@ \ + @OPT_FLAGS@ \ + @INCLUDEDIR@ \ + -I../../source \ + $(DEFS) + +LDFLAGS = @LDFLAGS@ \ + $(patsubst %,-framework %,$(FRAMEWORKS)) + +LIBS = @LIBS@ + +FRAMEWORKS = @FRAMEWORKS@ + +TARGETDIR = @TARGETDIR@ + +TARGET =$(NAME).@EXTENSION@ + +OBJECTS = $(patsubst %.cpp,./%.@OBJEXT@,$(BUILT_SOURCES)) + +SYSDIR = @SYSDIR@ + + +# ----------------------------- targets -------------------------------- + +all-local: $(OBJECTS) + $(CXX) $(LDFLAGS) -shared ./*.@OBJEXT@ $(LIBS) -o ../$(TARGETDIR)/$(TARGET) + strip --strip-unneeded ../$(TARGETDIR)/$(TARGET) + +./%.@OBJEXT@ : %.cpp + $(CXX) -c $(CXXFLAGS) $< -o $@ + +clean-local: + rm -f ../$(TARGETDIR)/$(TARGET) + rm -f ./$(OBJECTS) + +install-exec-local: + install ../$(TARGET) $(SYSDIR)extra
\ No newline at end of file |