1 files changed, 0 insertions, 128 deletions
diff --git a/pd/doc/3.audio.examples/12.tabread4.pd b/pd/doc/3.audio.examples/12.tabread4.pd
deleted file mode 100644
index b045485c..00000000
--- a/pd/doc/3.audio.examples/12.tabread4.pd
+++ /dev/null
@@ -1,128 +0,0 @@
-#N canvas 55 137 820 651 12;
-#X graph graph1 0 -1.02 130 1.02 462 160 720 30;
-#X array waveform12 131 float 1;
-#A 0 -0.172615 -0.172615 -0.172615 -0.172615 -0.172615 -0.141231 -0.109846
--0.0941538 -0.0627692 -0.0470769 0.0156923 0.0784615 0.125538 0.188308
-0.235385 0.298154 0.360923 0.392308 0.470769 0.533538 0.596308 0.643385
-0.674769 0.721846 0.753231 0.784615 0.816 0.831692 0.847385 0.878769
-0.894462 0.910154 0.910154 0.910154 0.910154 0.910154 0.894462 0.894462
-0.894462 0.894462 0.878769 0.863077 0.816 0.800308 0.768923 0.737538
-0.706154 0.674769 0.643385 0.596308 0.564923 0.533538 0.470769 0.423692
-0.376615 0.313846 0.266769 0.204 0.172615 0.109846 0.0627692 0.0156923
-0 -0.0313846 -0.0627692 -0.0784615 -0.0941538 -0.109846 -0.141231 -0.156923
--0.172615 -0.204 -0.219692 -0.219692 -0.235385 -0.235385 -0.235385
--0.219692 -0.219692 -0.219692 -0.204 -0.156923 -0.125538 -0.0784615
-0 0.172615 0.313846 0.470769 0.564923 0.627692 0.690462 0.721846 0.737538
-0.753231 0.768923 0.768923 0.753231 0.737538 0.706154 0.674769 0.612
-0.580615 0.549231 0.517846 0.486462 0.423692 0.392308 0.360923 0.282462
-0.219692 0.109846 -0.0156923 -0.0941538 -0.109846 -0.141231 -0.156923
--0.172615 -0.188308 -0.204 -0.204 -0.219692 -0.204 -0.204 -0.219692
--0.219692 -0.204 -0.204 -0.204 -0.204 -0.204 -0.188308;
-#X pop;
-#X floatatom 194 299 0 0 100;
-#N canvas 159 26 532 285 output 0;
-#X obj 338 160 t b;
-#X obj 338 110 f;
-#X obj 338 60 inlet;
-#X text 344 29 mute;
-#X obj 338 185 f;
-#X msg 426 180 0;
-#X msg 338 85 bang;
-#X obj 338 135 moses 1;
-#X obj 397 110 moses 1;
-#X obj 83 148 dbtorms;
-#X obj 397 85 r master-lvl;
-#X obj 83 42 r master-lvl;
-#X obj 338 210 s master-lvl;
-#X obj 20 155 inlet~;
-#X obj 199 41 inlet;
-#X text 199 18 level;
-#X obj 199 105 s master-lvl;
-#X msg 96 65 set \$1;
-#X obj 96 90 outlet;
-#X msg 214 65 \; pd dsp 1;
-#X obj 83 198 line~;
-#X obj 20 207 *~;
-#X obj 20 232 dac~;
-#X obj 83 173 pack 0 50;
-#X text 20 132 audio;
-#X text 96 114 show level;
-#X obj 426 155 t b;
-#X obj 20 181 hip~ 1;
-#X connect 0 0 4 0;
-#X connect 1 0 7 0;
-#X connect 2 0 6 0;
-#X connect 4 0 12 0;
-#X connect 5 0 12 0;
-#X connect 6 0 1 0;
-#X connect 7 0 0 0;
-#X connect 7 1 26 0;
-#X connect 8 1 4 1;
-#X connect 9 0 23 0;
-#X connect 10 0 1 1;
-#X connect 10 0 8 0;
-#X connect 11 0 9 0;
-#X connect 11 0 17 0;
-#X connect 13 0 27 0;
-#X connect 14 0 16 0;
-#X connect 14 0 19 0;
-#X connect 17 0 18 0;
-#X connect 20 0 21 1;
-#X connect 21 0 22 0;
-#X connect 21 0 22 1;
-#X connect 23 0 20 0;
-#X connect 26 0 5 0;
-#X connect 27 0 21 0;
-#X restore 156 327 pd output;
-#X msg 232 300 MUTE;
-#X text 554 624 updated for Pd version 0.34;
-#X text 33 8 WAVETABLE OSCILLATORS;
-#X obj 156 95 phasor~;
-#X obj 156 184 tabread4~ waveform12;
-#X obj 156 157 +~ 1;
-#X floatatom 156 66 4 0 0;
-#X floatatom 250 59 4 0 1000;
-#X obj 250 111 pack 0 50;
-#X obj 250 137 line~;
-#X obj 156 131 *~;
-#X text 21 81 phase;
-#X text 20 96 generation -->;
-#X text 25 117 range;
-#X text 24 132 adjustment -->;
-#X text 250 38 squeeze;
-#X text 133 40 frequency;
-#X graph graph3 0 -1 440 1 481 330 781 190;
-#X array wave-out12 441 float 0;
-#X pop;
-#X obj 177 247 tabwrite~ wave-out12;
-#X msg 177 216 bang;
-#X text 223 217 <--click to graph;
-#X obj 250 84 + 128;
-#X text 25 360 The tabread4~ module is available for situations requiring
-more control than tabosc4~ offers. The relationship between the two
-is the same as between cos~ and osc~ \, although the units are different
-between cos~ and tabread4~. Cos~ assumes input is normalized from 0
-to 1 (and will wrap around as needed.) Tabread4~ takes values from
-1 to n-2 where n is the number of points in the table-- for a 259-point
-table such as we have here \, it's 1 to 129 (so the "good" segment
-is 128 samples long.);
-#X text 30 508 You would use tabread4~ (as opposed to tabosc4~) if
-you need direct control of the phase \, for instance if you to advance
-nonlinearly through the table. In the case shown here \, the "squeeze"
-factor makes the phase grow to a value at least \, and possibly much
-graeater than \, 129 (to which tabread4~ then limits it). So the resulting
-waveform is compressed in time.;
-#X connect 1 0 2 1;
-#X connect 2 0 1 0;
-#X connect 3 0 2 2;
-#X connect 6 0 13 0;
-#X connect 7 0 2 0;
-#X connect 7 0 21 0;
-#X connect 8 0 7 0;
-#X connect 9 0 6 0;
-#X connect 10 0 24 0;
-#X connect 11 0 12 0;
-#X connect 12 0 13 1;
-#X connect 13 0 8 0;
-#X connect 22 0 21 0;
-#X connect 24 0 11 0;