aboutsummaryrefslogtreecommitdiff
path: root/pd/portaudio
diff options
context:
space:
mode:
Diffstat (limited to 'pd/portaudio')
-rw-r--r--pd/portaudio/pa_mac_core/notes.txt14
-rw-r--r--pd/portaudio/pa_mac_core/pa_mac_core.c1512
2 files changed, 980 insertions, 546 deletions
diff --git a/pd/portaudio/pa_mac_core/notes.txt b/pd/portaudio/pa_mac_core/notes.txt
index c79b90e6..3b557d9a 100644
--- a/pd/portaudio/pa_mac_core/notes.txt
+++ b/pd/portaudio/pa_mac_core/notes.txt
@@ -2,25 +2,25 @@ Notes on Core Audio Implementation of PortAudio
by Phil Burk and Darren Gibbs
-Document last updated March 20, 2002
+Document last updated October 18, 2002
WHAT WORKS
Output with very low latency, <10 msec.
Half duplex input or output.
-Full duplex on the same CoreAudio device.
+Full duplex
The paFLoat32, paInt16, paInt8, paUInt8 sample formats.
Pa_GetCPULoad()
Pa_StreamTime()
KNOWN BUGS OR LIMITATIONS
-We do not yet support simultaneous input and output on different
-devices. Note that some CoreAudio devices like the Roland UH30 look
-like one device but are actually two different CoreAudio devices. The
-BuiltIn audio is typically one CoreAudio device.
+The iMic supports multiple sample rates.
+But there is a bug when changing sample rates:
+ Run patest_record.c at rate A - it works.
+ Then run patest_record.c at rate B - it FAIL!
+ Then run patest_record.c again at rate B - it works!
-Mono doesn't work.
DEVICE MAPPING
diff --git a/pd/portaudio/pa_mac_core/pa_mac_core.c b/pd/portaudio/pa_mac_core/pa_mac_core.c
index 9a4b1488..de781d09 100644
--- a/pd/portaudio/pa_mac_core/pa_mac_core.c
+++ b/pd/portaudio/pa_mac_core/pa_mac_core.c
@@ -1,5 +1,5 @@
/*
- * $Id: pa_mac_core.c,v 1.8 2002/04/12 18:07:20 philburk Exp $
+ * $Id: pa_mac_core.c,v 1.8.4.3 2002/10/18 01:29:06 philburk Exp $
* pa_mac_core.c
* Implementation of PortAudio for Mac OS X Core Audio
*
@@ -7,7 +7,18 @@
* Latest Version at: http://www.portaudio.com
*
* Authors: Ross Bencina and Phil Burk
- * Copyright (c) 1999-2000 Ross Bencina and Phil Burk
+ * Copyright (c) 1999-2002 Ross Bencina and Phil Burk
+ *
+ * Theory of Operation
+ *
+ * This code uses the HAL (Hardware Access Layer) of the Apple CoreAudio library.
+ * This is the layer closes to the hardware.
+ * The HAL layer only supports the native HW supported sample rates.
+ * So if the chip only supports 44100 Hz, then the HAL only supports 44100.
+ * To provide other rates we use the handy Apple AUConverter which provides
+ * sample rate conversion, mono-to-stereo conversion, and buffer size adaptation.
+ *
+ * License
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files
@@ -43,18 +54,28 @@
audio input works if using same CoreAudio device (some HW devices make separate CoreAudio devices).
2.22.2002 - Stephane Letz - Explicit cast needed for compilation with Code Warrior 7
3.19.2002 - Phil Burk - Added paInt16, paInt8, format using new "pa_common/pa_convert.c" file.
- Return error if opened in mono mode cuz not supported.
+ Return error if opened in mono mode cuz not supported. [Supported 10.12.2002]
Add support for Pa_GetCPULoad();
Fixed timestamp in callback and Pa_StreamTime() (Thanks n++k for the advice!)
Check for invalid sample rates and return an error.
- Check for getenv("PA_MIN_LATEWNCY_MSEC") to set latency externally.
+ Check for getenv("PA_MIN_LATENCY_MSEC") to set latency externally.
Better error checking for invalid channel counts and invalid devices.
3.29.2002 - Phil Burk - Fixed Pa_GetCPULoad() for small buffers.
3.31.2002 - Phil Burk - Use getrusage() instead of gettimeofday() for CPU Load calculation.
+ 10.12.2002 - Phil Burk - Use AudioConverter to allow wide range of sample rates, and mono.
+ Use FIFO (from pablio/rinbuffer.h) so that we can pull data through converter.
+ Added PaOSX_FixVolumeScalar() to make iMic audible.
+ 10.17.2002 - Phil Burk - Support full duplex between two different devices.
+ Name internal functions PaOSX_*
+ Dumped useless PA_MIN_LATENCY_MSEC environment variable.
+ Use kAudioDevicePropertyStreamFormatMatch to determine max channels.
TODO:
-O- how do mono output?
-O- FIFO between input and output callbacks if different devices, like in pa_mac.c
+O- debug problem when changing sample rates on iMic
+O- add support for paInt32 format
+O- Why does iMic have grunge for the first second or two then clears up?
+O- request notification when formats change or device unplugged
+O- Why does patest_wire.c on iMic chop up sound when SR=34567Hz?
*/
#include <CoreServices/CoreServices.h>
@@ -62,10 +83,14 @@ O- FIFO between input and output callbacks if different devices, like in pa_mac.
#include <sys/time.h>
#include <sys/resource.h>
#include <unistd.h>
+#include <AudioUnit/AudioUnit.h>
+#include <AudioToolbox/DefaultAudioOutput.h>
+#include <AudioToolbox/AudioConverter.h>
#include "portaudio.h"
#include "pa_host.h"
#include "pa_trace.h"
+#include "ringbuffer.h"
/************************************************* Constants ********/
@@ -73,37 +98,45 @@ O- FIFO between input and output callbacks if different devices, like in pa_mac.
#define PA_TRACE_RUN (0)
#define PA_TRACE_START_STOP (1)
-#define PA_MIN_LATENCY_MSEC (8)
+#define PA_MIN_LATENCY_MSEC (1)
#define MIN_TIMEOUT_MSEC (1000)
#define PRINT(x) { printf x; fflush(stdout); }
-#define ERR_RPT(x) PRINT(x)
-#define DBUG(x) /* PRINT(x) /**/
-#define DBUGX(x) /* PRINT(x) /**/
+#define PRINT_ERR( msg, err ) PRINT(( msg ": error = 0x%0lX = '%s'\n", (err), ErrorToString(err)) )
+#define DBUG(x) /* PRINT(x) */
+#define DBUGBACK(x) /* if( sMaxBackgroundErrorMessages-- > 0 ) PRINT(x) */
+#define DBUGX(x)
// define value of isInput passed to CoreAudio routines
#define IS_INPUT (true)
#define IS_OUTPUT (false)
+typedef struct PaHostInOut
+{
+ AudioDeviceID audioDeviceID; // CoreAudio specific ID
+ int bytesPerUserNativeBuffer; /* User buffer size in native host format. Depends on numChannels. */
+ AudioConverterRef converter;
+ void *converterBuffer;
+} PaHostInOut;
+
/**************************************************************
* Structure for internal host specific stream data.
* This is allocated on a per stream basis.
*/
typedef struct PaHostSoundControl
{
- AudioDeviceID pahsc_AudioDeviceID; // Must be the same for input and output for now.
- /* Input -------------- */
- int pahsc_BytesPerUserNativeInputBuffer; /* native buffer size in bytes per user chunk */
- /* Output -------------- */
- int pahsc_BytesPerUserNativeOutputBuffer; /* native buffer size in bytes per user chunk */
- /* Init Time -------------- */
- int pahsc_FramesPerHostBuffer;
- int pahsc_UserBuffersPerHostBuffer;
+ PaHostInOut input;
+ PaHostInOut output;
+ AudioDeviceID primaryDeviceID;
+ Boolean usingSecondDevice;
+ int framesPerHostBuffer;
+ /* For sample rate, format conversion, or when using two devices. */
+ RingBuffer ringBuffer;
+ char *ringBufferData;
/* For measuring CPU utilization. */
- struct rusage pahsc_EntryRusage;
- double pahsc_InverseMicrosPerHostBuffer; /* 1/Microseconds of real-time audio per user buffer. */
-}
-PaHostSoundControl;
+ struct rusage entryRusage;
+ double inverseMicrosPerHostBuffer; /* 1/Microseconds of real-time audio per user buffer. */
+} PaHostSoundControl;
/**************************************************************
* Structure for internal extended device info.
@@ -125,14 +158,18 @@ static int sNumOutputDevices = 0;
static PaHostDeviceInfo *sDeviceInfos = NULL;
static int sDefaultInputDeviceID = paNoDevice;
static int sDefaultOutputDeviceID = paNoDevice;
-static int sPaHostError = 0;
-
+static int sSavedHostError = 0;
static int sNumCoreDevices = 0;
static AudioDeviceID *sCoreDeviceIDs; // Array of Core AudioDeviceIDs
+static const double supportedSampleRateRange[] = { 8000.0, 96000.0 };
static const char sMapperSuffixInput[] = " - Input";
static const char sMapperSuffixOutput[] = " - Output";
+/* Debug support. */
+//static int sMaxBackgroundErrorMessages = 100;
+//static int sCoverageCounter = 1; // used to check code coverage during validation
+
/* We index the input devices first, then the output devices. */
#define LOWEST_INPUT_DEVID (0)
#define HIGHEST_INPUT_DEVID (sNumInputDevices - 1)
@@ -143,15 +180,64 @@ static const char sMapperSuffixOutput[] = " - Output";
/************************************************* Prototypes **********/
-static PaError Pa_QueryDevices( void );
-PaError PaHost_GetTotalBufferFrames( internalPortAudioStream *past );
+static PaError PaOSX_QueryDevices( void );
+static int PaOSX_ScanDevices( Boolean isInput );
+static int PaOSX_QueryDeviceInfo( PaHostDeviceInfo *hostDeviceInfo, int coreDeviceIndex, Boolean isInput );
+static PaDeviceID PaOSX_QueryDefaultInputDevice( void );
+static PaDeviceID PaOSX_QueryDefaultOutputDevice( void );
+static void PaOSX_CalcHostBufferSize( internalPortAudioStream *past );
+
+/**********************************************************************/
+/* OS X errors are 4 character ID that can be printed.
+ * Note that uses a static pad so result must be printed immediately.
+ */
+static OSStatus statusText[2] = { 0, 0 };
+static const char *ErrorToString( OSStatus err )
+{
+ const char *str;
+
+ switch (err)
+ {
+ case kAudioHardwareUnspecifiedError:
+ str = "kAudioHardwareUnspecifiedError";
+ break;
+ case kAudioHardwareNotRunningError:
+ str = "kAudioHardwareNotRunningError";
+ break;
+ case kAudioHardwareUnknownPropertyError:
+ str = "kAudioHardwareUnknownPropertyError";
+ break;
+ case kAudioDeviceUnsupportedFormatError:
+ str = "kAudioDeviceUnsupportedFormatError";
+ break;
+ case kAudioHardwareBadPropertySizeError:
+ str = "kAudioHardwareBadPropertySizeError";
+ break;
+ case kAudioHardwareIllegalOperationError:
+ str = "kAudioHardwareIllegalOperationError";
+ break;
+ default:
+ str = "Unknown CoreAudio Error!";
+ statusText[0] = err;
+ str = (const char *)statusText;
+ break;
+ }
-static int PaHost_ScanDevices( Boolean isInput );
-static int PaHost_QueryDeviceInfo( PaHostDeviceInfo *hostDeviceInfo, int coreDeviceIndex, Boolean isInput );
+ return str;
+}
-static PaDeviceID Pa_QueryDefaultInputDevice( void );
-static PaDeviceID Pa_QueryDefaultOutputDevice( void );
-static void PaHost_CalcHostBufferSize( internalPortAudioStream *past );
+/**********************************************************************/
+static unsigned long RoundUpToNextPowerOf2( unsigned long n )
+{
+ long numBits = 0;
+ if( ((n-1) & n) == 0) return n; /* Already Power of two. */
+ while( n > 0 )
+ {
+ n= n>>1;
+ numBits++;
+ }
+ return (1<<numBits);
+}
/********************************* BEGIN CPU UTILIZATION MEASUREMENT ****/
static void Pa_StartUsageCalculation( internalPortAudioStream *past )
@@ -159,7 +245,7 @@ static void Pa_StartUsageCalculation( internalPortAudioStream *past )
PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
if( pahsc == NULL ) return;
/* Query user CPU timer for usage analysis and to prevent overuse of CPU. */
- getrusage( RUSAGE_SELF, &pahsc->pahsc_EntryRusage );
+ getrusage( RUSAGE_SELF, &pahsc->entryRusage );
}
static long SubtractTime_AminusB( struct timeval *timeA, struct timeval *timeB )
@@ -188,10 +274,10 @@ static void Pa_EndUsageCalculation( internalPortAudioStream *past )
if( getrusage( RUSAGE_SELF, &currentRusage ) == 0 )
{
- usecsElapsed = SubtractTime_AminusB( &currentRusage.ru_utime, &pahsc->pahsc_EntryRusage.ru_utime );
+ usecsElapsed = SubtractTime_AminusB( &currentRusage.ru_utime, &pahsc->entryRusage.ru_utime );
/* Use inverse because it is faster than the divide. */
- newUsage = usecsElapsed * pahsc->pahsc_InverseMicrosPerHostBuffer;
+ newUsage = usecsElapsed * pahsc->inverseMicrosPerHostBuffer;
past->past_Usage = (LOWPASS_COEFFICIENT_0 * past->past_Usage) +
(LOWPASS_COEFFICIENT_1 * newUsage);
@@ -200,92 +286,104 @@ static void Pa_EndUsageCalculation( internalPortAudioStream *past )
/****************************************** END CPU UTILIZATION *******/
/************************************************************************/
-static PaDeviceID Pa_QueryDefaultInputDevice( void )
+static PaDeviceID PaOSX_QueryDefaultInputDevice( void )
{
- OSStatus err = noErr;
- UInt32 count;
- int i;
+ OSStatus err = noErr;
+ UInt32 count;
+ int i;
AudioDeviceID tempDeviceID = kAudioDeviceUnknown;
- PaDeviceID defaultDeviceID = paNoDevice;
+ PaDeviceID defaultDeviceID = paNoDevice;
// get the default output device for the HAL
// it is required to pass the size of the data to be returned
count = sizeof(tempDeviceID);
err = AudioHardwareGetProperty( kAudioHardwarePropertyDefaultInputDevice, &count, (void *) &tempDeviceID);
- if (err != noErr) goto Bail;
+ if (err != noErr) goto error;
// scan input devices to see which one matches this device
defaultDeviceID = paNoDevice;
for( i=LOWEST_INPUT_DEVID; i<=HIGHEST_INPUT_DEVID; i++ )
{
- DBUG(("Pa_QueryDefaultInputDevice: i = %d, aDevId = %d\n", i, sDeviceInfos[i].audioDeviceID ));
+ DBUG(("PaOSX_QueryDefaultInputDevice: i = %d, aDevId = %ld\n", i, sDeviceInfos[i].audioDeviceID ));
if( sDeviceInfos[i].audioDeviceID == tempDeviceID )
{
defaultDeviceID = i;
break;
}
}
-Bail:
+error:
return defaultDeviceID;
}
/************************************************************************/
-static PaDeviceID Pa_QueryDefaultOutputDevice( void )
+static PaDeviceID PaOSX_QueryDefaultOutputDevice( void )
{
- OSStatus err = noErr;
- UInt32 count;
- int i;
+ OSStatus err = noErr;
+ UInt32 count;
+ int i;
AudioDeviceID tempDeviceID = kAudioDeviceUnknown;
- PaDeviceID defaultDeviceID = paNoDevice;
+ PaDeviceID defaultDeviceID = paNoDevice;
// get the default output device for the HAL
// it is required to pass the size of the data to be returned
count = sizeof(tempDeviceID);
err = AudioHardwareGetProperty( kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &tempDeviceID);
- if (err != noErr) goto Bail;
+ if (err != noErr) goto error;
// scan output devices to see which one matches this device
defaultDeviceID = paNoDevice;
for( i=LOWEST_OUTPUT_DEVID; i<=HIGHEST_OUTPUT_DEVID; i++ )
{
- DBUG(("Pa_QueryDefaultOutputDevice: i = %d, aDevId = %d\n", i, sDeviceInfos[i].audioDeviceID ));
+ DBUG(("PaOSX_QueryDefaultOutputDevice: i = %d, aDevId = %ld\n", i, sDeviceInfos[i].audioDeviceID ));
if( sDeviceInfos[i].audioDeviceID == tempDeviceID )
{
defaultDeviceID = i;
break;
}
}
-Bail:
+error:
return defaultDeviceID;
}
/******************************************************************/
-static PaError Pa_QueryDevices( void )
+static PaError PaOSX_QueryDevices( void )
{
OSStatus err = noErr;
UInt32 outSize;
Boolean outWritable;
- int numBytes;
+ int numBytes;
// find out how many Core Audio devices there are, if any
+ outSize = sizeof(outWritable);
err = AudioHardwareGetPropertyInfo(kAudioHardwarePropertyDevices, &outSize, &outWritable);
if (err != noErr)
- ERR_RPT(("Couldn't get info about list of audio devices\n"));
-
+ {
+ PRINT_ERR("Couldn't get info about list of audio devices", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
+
// calculate the number of device available
sNumCoreDevices = outSize / sizeof(AudioDeviceID);
// Bail if there aren't any devices
if (sNumCoreDevices < 1)
- ERR_RPT(("No Devices Available\n"));
-
+ {
+ PRINT(("No Devices Available"));
+ return paHostError;
+ }
+
// make space for the devices we are about to get
sCoreDeviceIDs = (AudioDeviceID *)malloc(outSize);
// get an array of AudioDeviceIDs
err = AudioHardwareGetProperty(kAudioHardwarePropertyDevices, &outSize, (void *)sCoreDeviceIDs);
if (err != noErr)
- ERR_RPT(("Couldn't get list of audio device IDs\n"));
+ {
+ PRINT_ERR("Couldn't get list of audio device IDs", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
// Allocate structures to hold device info pointers.
// There will be a maximum of two Pa devices per Core Audio device, input and/or output.
@@ -295,35 +393,22 @@ static PaError Pa_QueryDevices( void )
// Scan all the Core Audio devices to see which support input and allocate a
// PaHostDeviceInfo structure for each one.
- PaHost_ScanDevices( IS_INPUT );
+ PaOSX_ScanDevices( IS_INPUT );
sNumInputDevices = sNumPaDevices;
// Now scan all the output devices.
- PaHost_ScanDevices( IS_OUTPUT );
+ PaOSX_ScanDevices( IS_OUTPUT );
sNumOutputDevices = sNumPaDevices - sNumInputDevices;
// Figure out which of the devices that we scanned is the default device.
- sDefaultInputDeviceID = Pa_QueryDefaultInputDevice();
- sDefaultOutputDeviceID = Pa_QueryDefaultOutputDevice();
+ sDefaultInputDeviceID = PaOSX_QueryDefaultInputDevice();
+ sDefaultOutputDeviceID = PaOSX_QueryDefaultOutputDevice();
return paNoError;
}
-/************************************************************************************/
-long Pa_GetHostError()
-{
- return sPaHostError;
-}
-
-/*************************************************************************/
-int Pa_CountDevices()
-{
- if( sNumPaDevices <= 0 ) Pa_Initialize();
- return sNumPaDevices;
-}
-
/*************************************************************************/
/* Allocate a string containing the device name. */
-static char *PaHost_DeviceNameFromID(AudioDeviceID deviceID, Boolean isInput )
+static char *PaOSX_DeviceNameFromID(AudioDeviceID deviceID, Boolean isInput )
{
OSStatus err = noErr;
UInt32 outSize;
@@ -339,87 +424,18 @@ static char *PaHost_DeviceNameFromID(AudioDeviceID deviceID, Boolean isInput )
{
err = AudioDeviceGetProperty(deviceID, 0, isInput, kAudioDevicePropertyDeviceName, &outSize, deviceName);
if (err != noErr)
- ERR_RPT(("Couldn't get audio device name.\n"));
+ PRINT_ERR("Couldn't get audio device name", err);
}
}
return deviceName;
}
-/*************************************************************************/
-// An AudioStreamBasicDescription is passed in to query whether or not
-// the format is supported. A kAudioDeviceUnsupportedFormatError will
-// be returned if the format is not supported and kAudioHardwareNoError
-// will be returned if it is supported. AudioStreamBasicDescription
-// fields set to 0 will be ignored in the query, but otherwise values
-// must match exactly.
-
-Boolean deviceDoesSupportFormat(AudioDeviceID deviceID, AudioStreamBasicDescription *desc, Boolean isInput )
-{
- OSStatus err = noErr;
- UInt32 outSize;
-
- outSize = sizeof(*desc);
- err = AudioDeviceGetProperty(deviceID, 0, isInput, kAudioDevicePropertyStreamFormatSupported, &outSize, desc);
-
- if (err == kAudioHardwareNoError)
- return true;
- else
- return false;
-}
-
-/*************************************************************************/
-// return an error string
-char* coreAudioErrorString (int errCode )
-{
- char *str;
-
- switch (errCode)
- {
- case kAudioHardwareUnspecifiedError:
- str = "kAudioHardwareUnspecifiedError";
- break;
- case kAudioHardwareNotRunningError:
- str = "kAudioHardwareNotRunningError";
- break;
- case kAudioHardwareUnknownPropertyError:
- str = "kAudioHardwareUnknownPropertyError";
- break;
- case kAudioDeviceUnsupportedFormatError:
- str = "kAudioDeviceUnsupportedFormatError";
- break;
- case kAudioHardwareBadPropertySizeError:
- str = "kAudioHardwareBadPropertySizeError";
- break;
- case kAudioHardwareIllegalOperationError:
- str = "kAudioHardwareIllegalOperationError";
- break;
- default:
- str = "Unknown CoreAudio Error!";
- break;
- }
-
- return str;
-}
-
-/*************************************************************************
-** PaDeviceInfo structures have already been created
-** so just return the pointer.
-**
-*/
-const PaDeviceInfo* Pa_GetDeviceInfo( PaDeviceID id )
-{
- if( id < 0 || id >= sNumPaDevices )
- return NULL;
-
- return &sDeviceInfos[id].paInfo;
-}
-
/*************************************************************************
** Scan all of the Core Audio devices to see which support input or output.
** Changes sNumDevices, and fills in sDeviceInfos.
*/
-static int PaHost_ScanDevices( Boolean isInput )
+static int PaOSX_ScanDevices( Boolean isInput )
{
int coreDeviceIndex;
int result;
@@ -430,8 +446,8 @@ static int PaHost_ScanDevices( Boolean isInput )
{
// try to fill in next PaHostDeviceInfo
hostDeviceInfo = &sDeviceInfos[sNumPaDevices];
- result = PaHost_QueryDeviceInfo( hostDeviceInfo, coreDeviceIndex, isInput );
- DBUG(("PaHost_ScanDevices: paDevId = %d, coreDevId = %d\n", sNumPaDevices, hostDeviceInfo->audioDeviceID ));
+ result = PaOSX_QueryDeviceInfo( hostDeviceInfo, coreDeviceIndex, isInput );
+ DBUGX(("PaOSX_ScanDevices: paDevId = %d, coreDevId = %d\n", sNumPaDevices, coreDeviceIndex ));
if( result > 0 )
{
sNumPaDevices += 1; // bump global counter if we got one
@@ -442,6 +458,7 @@ static int PaHost_ScanDevices( Boolean isInput )
return numAdded;
}
+
/*************************************************************************
** Try to fill in the device info for this device.
** Return 1 if a good device that PA can use.
@@ -449,59 +466,55 @@ static int PaHost_ScanDevices( Boolean isInput )
** or return negative error.
**
*/
-static int PaHost_QueryDeviceInfo( PaHostDeviceInfo *hostDeviceInfo, int coreDeviceIndex, Boolean isInput )
+static int PaOSX_QueryDeviceInfo( PaHostDeviceInfo *hostDeviceInfo, int coreDeviceIndex, Boolean isInput )
{
- OSErr err;
- int index;
- UInt32 outSize;
+ OSStatus err;
+ UInt32 outSize;
AudioStreamBasicDescription formatDesc;
- Boolean result;
AudioDeviceID devID;
- double *sampleRates = NULL; /* non-const ptr */
-
- PaDeviceInfo *deviceInfo = &hostDeviceInfo->paInfo;
- double possibleSampleRates[] = {8000.0, 11025.0, 22050.0, 44100.0, 48000.0, 88200.0, 96000.0};
- int maxNumSampleRates = sizeof( possibleSampleRates ) / sizeof( double );
+ PaDeviceInfo *deviceInfo = &hostDeviceInfo->paInfo;
deviceInfo->structVersion = 1;
deviceInfo->maxInputChannels = 0;
deviceInfo->maxOutputChannels = 0;
+
+ deviceInfo->sampleRates = supportedSampleRateRange; // because we use sample rate converter to get continuous rates
deviceInfo->numSampleRates = -1;
devID = sCoreDeviceIDs[ coreDeviceIndex ];
hostDeviceInfo->audioDeviceID = devID;
+ DBUG(("PaOSX_QueryDeviceInfo: coreDeviceIndex = %d, devID = %d, isInput = %d\n",
+ coreDeviceIndex, devID, isInput ));
+ // Get data format info from the device.
+ outSize = sizeof(formatDesc);
+ err = AudioDeviceGetProperty(devID, 0, isInput, kAudioDevicePropertyStreamFormat, &outSize, &formatDesc);
+ // This just may not be an appropriate device for input or output so leave quietly.
+ if( (err != noErr) || (formatDesc.mChannelsPerFrame == 0) ) goto error;
- // Figure out supported sample rates
- // Make room in case device supports all rates.
- sampleRates = (double*)PaHost_AllocateFastMemory( maxNumSampleRates * sizeof(double) );
- if( sampleRates == NULL ) return paInsufficientMemory;
-
- deviceInfo->sampleRates = sampleRates;
- deviceInfo->numSampleRates = 0;
-
- // Loop through the possible sampling rates and check each to see if the device supports it.
- for (index = 0; index < maxNumSampleRates; index ++)
+ // Right now the Core Audio headers only define one formatID: LinearPCM
+ // Apparently LinearPCM must be Float32 for now.
+ if( (formatDesc.mFormatID == kAudioFormatLinearPCM) &&
+ (formatDesc.mFormatFlags & kLinearPCMFormatFlagIsFloat) )
{
- memset( &formatDesc, 0, sizeof(AudioStreamBasicDescription) );
- formatDesc.mSampleRate = possibleSampleRates[index];
- result = deviceDoesSupportFormat( devID, &formatDesc, isInput );
-
- if (result == true)
- {
- deviceInfo->numSampleRates += 1;
- *sampleRates = possibleSampleRates[index];
- sampleRates++;
- }
+ deviceInfo->nativeSampleFormats = paFloat32;
+ }
+ else
+ {
+ return paSampleFormatNotSupported;
}
- // If no sample rates supported, then not a very good device.
- if( deviceInfo->numSampleRates == 0 ) goto error;
- // Get data format info from the device.
+ // Determine maximum number of channels supported.
+ memset( &formatDesc, 0, sizeof(formatDesc));
+ formatDesc.mChannelsPerFrame = 256; // FIXME - what about device with > 256 channels
outSize = sizeof(formatDesc);
- err = AudioDeviceGetProperty(devID, 0, isInput, kAudioDevicePropertyStreamFormat, &outSize, &formatDesc);
-
- // If no channels supported, then not a very good device.
- if( (err != noErr) || (formatDesc.mChannelsPerFrame == 0) ) goto error;
+ err = AudioDeviceGetProperty( devID, 0,
+ isInput, kAudioDevicePropertyStreamFormatMatch, &outSize, &formatDesc);
+ if( err != noErr )
+ {
+ PRINT_ERR("PaOSX_QueryDeviceInfo: Could not get device format match", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
if( isInput )
{
@@ -512,205 +525,268 @@ static int PaHost_QueryDeviceInfo( PaHostDeviceInfo *hostDeviceInfo, int coreDev
deviceInfo->maxOutputChannels = formatDesc.mChannelsPerFrame;
}
- // FIXME - where to put current sample rate?: formatDesc.mSampleRate
-
- // Right now the Core Audio headers only define one formatID: LinearPCM
- // Apparently LinearPCM must be Float32 for now.
- switch (formatDesc.mFormatID)
- {
- case kAudioFormatLinearPCM:
- deviceInfo->nativeSampleFormats = paFloat32;
-
- // FIXME - details about the format are in these flags.
- // formatDesc.mFormatFlags
-
- // here are the possibilities
- // kLinearPCMFormatFlagIsFloat // set for floating point, clear for integer
- // kLinearPCMFormatFlagIsBigEndian // set for big endian, clear for little
- // kLinearPCMFormatFlagIsSignedInteger // set for signed integer, clear for unsigned integer,
- // only valid if kLinearPCMFormatFlagIsFloat is clear
- // kLinearPCMFormatFlagIsPacked // set if the sample bits are packed as closely together as possible,
- // clear if they are high or low aligned within the channel
- // kLinearPCMFormatFlagIsAlignedHigh // set if the sample bits are placed
- break;
-
- default:
- deviceInfo->nativeSampleFormats = paFloat32; // FIXME
- break;
- }
-
// Get the device name
- deviceInfo->name = PaHost_DeviceNameFromID( devID, isInput );
+ deviceInfo->name = PaOSX_DeviceNameFromID( devID, isInput );
return 1;
error:
- if( sampleRates != NULL ) free( sampleRates );
return 0;
}
-/*************************************************************************
-** Returns recommended device ID.
-** On the PC, the recommended device can be specified by the user by
-** setting an environment variable. For example, to use device #1.
-**
-** set PA_RECOMMENDED_OUTPUT_DEVICE=1
-**
-** The user should first determine the available device ID by using
-** the supplied application "pa_devs".
-*/
-#define PA_ENV_BUF_SIZE (32)
-#define PA_REC_IN_DEV_ENV_NAME ("PA_RECOMMENDED_INPUT_DEVICE")
-#define PA_REC_OUT_DEV_ENV_NAME ("PA_RECOMMENDED_OUTPUT_DEVICE")
-
-static PaDeviceID PaHost_GetEnvDefaultDeviceID( char *envName )
-{
-#if 0
- UInt32 hresult;
- char envbuf[PA_ENV_BUF_SIZE];
- PaDeviceID recommendedID = paNoDevice;
-
- /* Let user determine default device by setting environment variable. */
- hresult = GetEnvironmentVariable( envName, envbuf, PA_ENV_BUF_SIZE );
- if( (hresult > 0) && (hresult < PA_ENV_BUF_SIZE) )
- {
- recommendedID = atoi( envbuf );
- }
-
- return recommendedID;
-#endif
- return paNoDevice;
-}
-
-static PaError Pa_MaybeQueryDevices( void )
+/**********************************************************************/
+static PaError PaOSX_MaybeQueryDevices( void )
{
if( sNumPaDevices == 0 )
{
- return Pa_QueryDevices();
+ return PaOSX_QueryDevices();
}
return 0;
}
+static char zeroPad[256] = { 0 };
+
/**********************************************************************
-** Check for environment variable, else query devices and use result.
+** This is the proc that supplies the data to the AudioConverterFillBuffer call.
+** We can pass back arbitrarily sized blocks so if the FIFO region is split
+** just pass back the first half.
*/
-PaDeviceID Pa_GetDefaultInputDeviceID( void )
+static OSStatus PaOSX_InputConverterCallbackProc (AudioConverterRef inAudioConverter,
+ UInt32* outDataSize,
+ void** outData,
+ void* inUserData)
{
- PaError result;
- result = PaHost_GetEnvDefaultDeviceID( PA_REC_IN_DEV_ENV_NAME );
- if( result < 0 )
+ internalPortAudioStream *past = (internalPortAudioStream *) inUserData;
+ PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
+ void *dataPtr1;
+ long size1;
+ void *dataPtr2;
+ long size2;
+
+ /* Pass contiguous region from FIFO directly to converter. */
+ RingBuffer_GetReadRegions( &pahsc->ringBuffer, *outDataSize,
+ &dataPtr1, &size1, &dataPtr2, &size2 );
+
+ if( size1 > 0 )
{
- result = Pa_MaybeQueryDevices();
- if( result < 0 ) return result;
- result = sDefaultInputDeviceID;
+ *outData = dataPtr1;
+ *outDataSize = size1;
+ RingBuffer_AdvanceReadIndex( &pahsc->ringBuffer, size1 );
+ DBUGX(("PaOSX_InputConverterCallbackProc: read %ld bytes from FIFO.\n", size1 ));
}
- return result;
+ else
+ {
+ DBUGBACK(("PaOSX_InputConverterCallbackProc: got no data!\n"));
+ *outData = zeroPad; // Give it zero data to keep it happy.
+ *outDataSize = sizeof(zeroPad);
+ }
+ return noErr;
}
-PaDeviceID Pa_GetDefaultOutputDeviceID( void )
+/*****************************************************************************
+** Get audio input, if any, from passed in buffer, or from converter or from FIFO
+** and run PA callback.
+*/
+static OSStatus PaOSX_LoadAndProcess( internalPortAudioStream *past,
+ void *inputBuffer, void *outputBuffer )
{
- PaError result;
- result = PaHost_GetEnvDefaultDeviceID( PA_REC_OUT_DEV_ENV_NAME );
- if( result < 0 )
+ OSStatus err = noErr;
+ PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
+
+ if( past->past_StopSoon )
{
- result = Pa_MaybeQueryDevices();
- if( result < 0 ) return result;
- result = sDefaultOutputDeviceID;
+ if( outputBuffer )
+ {
+ /* Clear remainder of audio buffer if we are waiting for stop. */
+ AddTraceMessage("PaOSX_HandleInputOutput: zero rest of wave buffer ", i );
+ memset( outputBuffer, 0, pahsc->output.bytesPerUserNativeBuffer );
+ }
}
- return result;
+ else
+ {
+ /* Do we need data from the converted input? */
+ if( pahsc->input.converter != NULL )
+ {
+ UInt32 size = pahsc->input.bytesPerUserNativeBuffer;
+ err = AudioConverterFillBuffer(
+ pahsc->input.converter,
+ PaOSX_InputConverterCallbackProc,
+ past,
+ &size,
+ pahsc->input.converterBuffer);
+ if( err != noErr ) return err;
+ inputBuffer = pahsc->input.converterBuffer;
+ }
+ /* Or should just get the data directly from the FIFO? */
+ else if( pahsc->ringBufferData != NULL )
+ {
+ if( RingBuffer_GetReadAvailable( &pahsc->ringBuffer ) >= pahsc->input.bytesPerUserNativeBuffer)
+ {
+ RingBuffer_Read( &pahsc->ringBuffer, pahsc->input.converterBuffer, pahsc->input.bytesPerUserNativeBuffer );
+ inputBuffer = pahsc->input.converterBuffer;
+ }
+ }
+
+ /* Fill part of audio converter buffer by converting input to user format,
+ * calling user callback, then converting output to native format. */
+ if( PaConvert_Process( past, inputBuffer, outputBuffer ))
+ {
+ past->past_StopSoon = 1;
+ }
+ }
+ return err;
}
-/**********************************************************************
-** Initialize Host dependant part of API.
+/*****************************************************************************
+** This is the proc that supplies the data to the AudioConverterFillBuffer call
*/
-
-PaError PaHost_Init( void )
+static OSStatus PaOSX_OutputConverterCallbackProc (AudioConverterRef inAudioConverter,
+ UInt32* outDataSize,
+ void** outData,
+ void* inUserData)
{
- return Pa_MaybeQueryDevices();
+ internalPortAudioStream *past = (internalPortAudioStream *) inUserData;
+ PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
+
+ *outData = pahsc->output.converterBuffer;
+ *outDataSize = pahsc->output.bytesPerUserNativeBuffer;
+
+ return PaOSX_LoadAndProcess ( past, pahsc->input.converterBuffer, pahsc->output.converterBuffer );
}
/**********************************************************************
** Fill any available output buffers and use any available
** input buffers by calling user callback.
+** Will set past->past_StopSoon if user callback indicates that it is finished.
*/
-static PaError Pa_TimeSlice( internalPortAudioStream *past, const AudioBufferList* inInputData,
- AudioBufferList* outOutputData )
+static OSStatus PaOSX_HandleInputOutput( internalPortAudioStream *past,
+ const AudioBufferList* inInputData,
+ AudioBufferList* outOutputData )
{
- PaError result = 0;
- char *inputNativeBufferfPtr = NULL;
- char *outputNativeBufferfPtr = NULL;
- int i;
- int buffersProcessed = 0;
- int done = 0;
+ OSStatus err = noErr;
+ char *inputNativeBufferfPtr = NULL;
+ char *outputNativeBufferfPtr = NULL;
+ int i;
PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
- if( pahsc == NULL ) return paInternalError;
-
- past->past_NumCallbacks += 1;
-
-#if PA_TRACE_RUN
- AddTraceMessage("Pa_TimeSlice: past_NumCallbacks ", past->past_NumCallbacks );
-#endif
-
- Pa_StartUsageCalculation( past );
/* If we are using output, then we need an empty output buffer. */
- if( past->past_NumOutputChannels > 0 )
+ if( outOutputData->mNumberBuffers > 0 )
{
outputNativeBufferfPtr = (char*)outOutputData->mBuffers[0].mData;
}
- /* If we are using input, then we need a full input buffer. */
- if( past->past_NumInputChannels > 0 )
+ if( inInputData->mNumberBuffers > 0 )
{
inputNativeBufferfPtr = (char*)inInputData->mBuffers[0].mData;
+
+ /* If there is a FIFO for input then write to it. */
+ if( (pahsc->ringBufferData != NULL) && !pahsc->usingSecondDevice )
+ {
+ long writeRoom = RingBuffer_GetWriteAvailable( &pahsc->ringBuffer );
+ long numBytes = inInputData->mBuffers[0].mDataByteSize;
+ if( numBytes <= writeRoom )
+ {
+ RingBuffer_Write( &pahsc->ringBuffer, inputNativeBufferfPtr, numBytes );
+ DBUGBACK(("PaOSX_HandleInputOutput: wrote %ld bytes to FIFO.\n", inInputData->mBuffers[0].mDataByteSize));
+ } // FIXME else ???
+ }
}
-
- buffersProcessed += 1;
-
- /* Each host buffer contains multiple user buffers so do them all now. */
- for( i=0; i<pahsc->pahsc_UserBuffersPerHostBuffer; i++ )
+
+ if( pahsc->output.converter != NULL )
{
- if( done )
+ /* Using output and input converter. */
+ UInt32 size = outOutputData->mBuffers[0].mDataByteSize;
+ err = AudioConverterFillBuffer(
+ pahsc->output.converter,
+ PaOSX_OutputConverterCallbackProc,
+ past,
+ &size,
+ outputNativeBufferfPtr);
+ if( err != noErr )
{
- if( outputNativeBufferfPtr )
- {
- /* Clear remainder of wave buffer if we are waiting for stop. */
- AddTraceMessage("Pa_TimeSlice: zero rest of wave buffer ", i );
- memset( outputNativeBufferfPtr, 0, pahsc->pahsc_BytesPerUserNativeOutputBuffer );
- }
+ PRINT_ERR("PaOSX_HandleInputOutput: AudioConverterFillBuffer failed", err);
+ goto error;
}
- else
+ }
+ else if( (pahsc->input.converter != NULL) && !pahsc->usingSecondDevice)
+ {
+ /* Using just an input converter. */
+ /* Generate user buffers as long as we have a half full input FIFO. */
+ long gotHalf = pahsc->ringBuffer.bufferSize / 2;
+ while( (RingBuffer_GetReadAvailable( &pahsc->ringBuffer ) >= gotHalf) &&
+ (past->past_StopSoon == 0) )
{
- /* Convert 32 bit native data to user data and call user routine. */
- result = PaConvert_Process( past, inputNativeBufferfPtr, outputNativeBufferfPtr );
- if( result != 0) done = 1;
+ err = PaOSX_LoadAndProcess ( past, NULL, outputNativeBufferfPtr );
+ if( err != noErr ) goto error;
+ if( outputNativeBufferfPtr) outputNativeBufferfPtr += pahsc->output.bytesPerUserNativeBuffer;
}
- if( inputNativeBufferfPtr ) inputNativeBufferfPtr += pahsc->pahsc_BytesPerUserNativeInputBuffer;
- if( outputNativeBufferfPtr) outputNativeBufferfPtr += pahsc->pahsc_BytesPerUserNativeOutputBuffer;
}
-
- Pa_EndUsageCalculation( past );
-
-#if PA_TRACE_RUN
- AddTraceMessage("Pa_TimeSlice: buffersProcessed ", buffersProcessed );
-#endif
-
- return (result != 0) ? result : done;
+ else
+ {
+ /* No AUConverters used. */
+ /* Each host buffer contains multiple user buffers so do them all now. */
+ for( i=0; i<past->past_NumUserBuffers; i++ )
+ {
+ err = PaOSX_LoadAndProcess ( past, inputNativeBufferfPtr, outputNativeBufferfPtr );
+ if( err != noErr ) goto error;
+ if( inputNativeBufferfPtr ) inputNativeBufferfPtr += pahsc->input.bytesPerUserNativeBuffer;
+ if( outputNativeBufferfPtr) outputNativeBufferfPtr += pahsc->output.bytesPerUserNativeBuffer;
+ }
+ }
+
+error:
+ return err;
}
-OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow,
+/******************************************************************
+ * This callback is used when two separate devices are used for input and output.
+ * This often happens when using USB devices which present as two devices: input and output.
+ * It just writes its data to a FIFO so that it can be read by the main callback
+ * proc PaOSX_CoreAudioIOCallback().
+ */
+static OSStatus PaOSX_CoreAudioInputCallback (AudioDeviceID inDevice, const AudioTimeStamp* inNow,
const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime,
AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime,
void* contextPtr)
{
+ internalPortAudioStream *past = (internalPortAudioStream *) contextPtr;
+ PaHostSoundControl *pahsc;
+ pahsc = (PaHostSoundControl *) past->past_DeviceData;
+
+ /* If there is a FIFO for input then write to it. */
+ if( pahsc->ringBufferData != NULL )
+ {
+ long writeRoom = RingBuffer_GetWriteAvailable( &pahsc->ringBuffer );
+ long numBytes = inInputData->mBuffers[0].mDataByteSize;
+ if( numBytes <= writeRoom )
+ {
+ RingBuffer_Write( &pahsc->ringBuffer, inInputData->mBuffers[0].mData, inInputData->mBuffers[0].mDataByteSize );
+ }
+ else
+ {
+ DBUGBACK(("PaOSX_CoreAudioInputCallback: FIFO too full to write!\n"));
+ }
+ }
+
+ return noErr;
+}
- PaError result = 0;
+/******************************************************************
+ * This is the primary callback for CoreAudio.
+ * It can handle input and/or output for a single device.
+ * It takes input from CoreAudio, converts it and passes it to the
+ * PortAudio callback. Then takes the PA results and passes it back to CoreAudio.
+ */
+static OSStatus PaOSX_CoreAudioIOCallback (AudioDeviceID inDevice, const AudioTimeStamp* inNow,
+ const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime,
+ AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime,
+ void* contextPtr)
+{
+ OSStatus err = noErr;
internalPortAudioStream *past;
PaHostSoundControl *pahsc;
past = (internalPortAudioStream *) contextPtr;
pahsc = (PaHostSoundControl *) past->past_DeviceData;
-// printf("Num input Buffers: %d; Num output Buffers: %d.\n", inInputData->mNumberBuffers, outOutputData->mNumberBuffers);
-
/* Has someone asked us to abort by calling Pa_AbortStream()? */
if( past->past_StopNow )
{
@@ -721,7 +797,7 @@ OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow,
*/
else if( past->past_StopSoon )
{
- // FIXME - pretend all done
+ // FIXME - Pretend all done. Should wait for audio to play out but CoreAudio latency very low.
past->past_IsActive = 0; /* Will cause thread to return. */
}
else
@@ -732,63 +808,220 @@ OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow,
past->past_FrameCount = inOutputTime->mSampleTime;
}
+ /* Measure CPU load. */
+ Pa_StartUsageCalculation( past );
+ past->past_NumCallbacks += 1;
+
/* Process full input buffer and fill up empty output buffers. */
- if( (result = Pa_TimeSlice( past, inInputData, outOutputData )) != 0)
- {
- /* User callback has asked us to stop. */
-#if PA_TRACE_START_STOP
- AddTraceMessage( "Pa_OutputThreadProc: TimeSlice() returned ", result );
-#endif
- past->past_StopSoon = 1; /* Request that audio play out then stop. */
- result = paNoError;
- }
+ err = PaOSX_HandleInputOutput( past, inInputData, outOutputData );
+
+ Pa_EndUsageCalculation( past );
}
- // FIXME PaHost_UpdateStreamTime( pahsc );
-
- return result;
-}
+ // FIXME PaOSX_UpdateStreamTime( pahsc );
+ if( err != 0 ) DBUG(("PaOSX_CoreAudioIOCallback: returns %ld.\n", err ));
-#if 0
-static int PaHost_CalcTimeOut( internalPortAudioStream *past )
-{
- /* Calculate timeOut longer than longest time it could take to play all buffers. */
- int timeOut = (UInt32) (1500.0 * PaHost_GetTotalBufferFrames( past ) / past->past_SampleRate);
- if( timeOut < MIN_TIMEOUT_MSEC ) timeOut = MIN_TIMEOUT_MSEC;
- return timeOut;
+ return err;
}
-#endif
-
/*******************************************************************/
/* Attempt to set device sample rate. */
-static PaError PaHost_SetSampleRate( AudioDeviceID devID, Boolean isInput, double sampleRate )
+static PaError PaOSX_SetSampleRate( AudioDeviceID devID, Boolean isInput, double sampleRate )
{
AudioStreamBasicDescription formatDesc;
+ PaError result = paNoError;
OSStatus err;
+ UInt32 dataSize;
+
+ // try to set to desired rate
memset( &formatDesc, 0, sizeof(AudioStreamBasicDescription) );
formatDesc.mSampleRate = sampleRate;
err = AudioDeviceSetProperty( devID, 0, 0,
isInput, kAudioDevicePropertyStreamFormat, sizeof(formatDesc), &formatDesc);
+ if (err != noErr)
+ {
+ result = paInvalidSampleRate;
+
+ /* Could not set to desired rate so query for closest match. */
+ DBUG(("PaOSX_SetSampleRate: couldn't set to %f. Try to find match.\n", sampleRate ));
+ dataSize = sizeof(formatDesc);
+ AudioDeviceGetProperty( devID, 0,
+ isInput, kAudioDevicePropertyStreamFormatMatch, &dataSize, &formatDesc);
+ formatDesc.mSampleRate = sampleRate;
+ err = AudioDeviceGetProperty( devID, 0,
+ isInput, kAudioDevicePropertyStreamFormatMatch, &dataSize, &formatDesc);
+ if (err == noErr)
+ {
+ /* Set to that matching rate. */
+ sampleRate = formatDesc.mSampleRate;
+ DBUG(("PaOSX_SetSampleRate: match succeeded, set to %f instead\n", sampleRate ));
+ memset( &formatDesc, 0, sizeof(AudioStreamBasicDescription) );
+ formatDesc.mSampleRate = sampleRate;
+ AudioDeviceSetProperty( devID, 0, 0,
+ isInput, kAudioDevicePropertyStreamFormat, sizeof(formatDesc), &formatDesc);
+ }
+ }
+ return result;
+}
+
+/*******************************************************************
+ * Check volume level of device. If below threshold, then set to newLevel.
+ * Using volume instead of decibels because decibel range varies by device.
+ */
+static void PaOSX_FixVolumeScalars( AudioDeviceID devID, Boolean isInput,
+ int numChannels, double threshold, double newLevel )
+{
+ OSStatus err = noErr;
+ UInt32 dataSize;
+ int iChannel;
+
+/* The master channel is 0. Left and right are channels 1 and 2. */
+/* Fix volume. */
+ for( iChannel = 0; iChannel<=numChannels; iChannel++ )
+ {
+ Float32 fdata32;
+ dataSize = sizeof( fdata32 );
+ err = AudioDeviceGetProperty( devID, iChannel, isInput,
+ kAudioDevicePropertyVolumeScalar, &dataSize, &fdata32 );
+ if( err == noErr )
+ {
+ DBUG(("kAudioDevicePropertyVolumeScalar for channel %d = %f\n", iChannel, fdata32));
+ if( fdata32 <= (Float32) threshold )
+ {
+ dataSize = sizeof( fdata32 );
+ fdata32 = (Float32) newLevel;
+ err = AudioDeviceSetProperty( devID, 0, iChannel, isInput,
+ kAudioDevicePropertyVolumeScalar, dataSize, &fdata32 );
+ if( err != noErr )
+ {
+ PRINT(("Warning: audio volume is very low and could not be turned up.\n"));
+ }
+ else
+ {
+ PRINT(("Volume for audio channel %d was <= %4.2f so set to %4.2f by PortAudio!\n",
+ iChannel, threshold, newLevel ));
+ }
+ }
+ }
+ }
+/* Unmute if muted. */
+ for( iChannel = 0; iChannel<=numChannels; iChannel++ )
+ {
+ UInt32 uidata32;
+ dataSize = sizeof( uidata32 );
+ err = AudioDeviceGetProperty( devID, iChannel, isInput,
+ kAudioDevicePropertyMute, &dataSize, &uidata32 );
+ if( err == noErr )
+ {
+ DBUG(("uidata32 for channel %d = %ld\n", iChannel, uidata32));
+ if( uidata32 == 1 ) // muted?
+ {
+ dataSize = sizeof( uidata32 );
+ uidata32 = 0; // unmute
+ err = AudioDeviceSetProperty( devID, 0, iChannel, isInput,
+ kAudioDevicePropertyMute, dataSize, &uidata32 );
+ if( err != noErr )
+ {
+ PRINT(("Warning: audio is muted and could not be unmuted!\n"));
+ }
+ else
+ {
+ PRINT(("Audio channel %d was unmuted by PortAudio!\n", iChannel ));
+ }
+ }
+ }
+ }
- if (err != kAudioHardwareNoError) return paInvalidSampleRate;
- else return paNoError;
}
+#if 0
+static void PaOSX_DumpDeviceInfo( AudioDeviceID devID, Boolean isInput )
+{
+ OSStatus err = noErr;
+ UInt32 dataSize;
+ UInt32 uidata32;
+ Float32 fdata32;
+ AudioValueRange audioRange;
+
+ dataSize = sizeof( uidata32 );
+ err = AudioDeviceGetProperty( devID, 0, isInput,
+ kAudioDevicePropertyLatency, &dataSize, &uidata32 );
+ if( err != noErr )
+ {
+ PRINT_ERR("Error reading kAudioDevicePropertyLatency", err);
+ return;
+ }
+ PRINT(("kAudioDevicePropertyLatency = %d\n", (int)uidata32 ));
+
+ dataSize = sizeof( fdata32 );
+ err = AudioDeviceGetProperty( devID, 1, isInput,
+ kAudioDevicePropertyVolumeScalar, &dataSize, &fdata32 );
+ if( err != noErr )
+ {
+ PRINT_ERR("Error reading kAudioDevicePropertyVolumeScalar", err);
+ return;
+ }
+ PRINT(("kAudioDevicePropertyVolumeScalar = %f\n", fdata32 ));
+
+ dataSize = sizeof( uidata32 );
+ err = AudioDeviceGetProperty( devID, 0, isInput,
+ kAudioDevicePropertyBufferSize, &dataSize, &uidata32 );
+ if( err != noErr )
+ {
+ PRINT_ERR("Error reading buffer size", err);
+ return;
+ }
+ PRINT(("kAudioDevicePropertyBufferSize = %d bytes\n", (int)uidata32 ));
+
+ dataSize = sizeof( audioRange );
+ err = AudioDeviceGetProperty( devID, 0, isInput,
+ kAudioDevicePropertyBufferSizeRange, &dataSize, &audioRange );
+ if( err != noErr )
+ {
+ PRINT_ERR("Error reading buffer size range", err);
+ return;
+ }
+ PRINT(("kAudioDevicePropertyBufferSizeRange = %g to %g bytes\n", audioRange.mMinimum, audioRange.mMaximum ));
+
+ dataSize = sizeof( uidata32 );
+ err = AudioDeviceGetProperty( devID, 0, isInput,
+ kAudioDevicePropertyBufferFrameSize, &dataSize, &uidata32 );
+ if( err != noErr )
+ {
+ PRINT_ERR("Error reading buffer size", err);
+ return;
+ }
+ PRINT(("kAudioDevicePropertyBufferFrameSize = %d frames\n", (int)uidata32 ));
+
+ dataSize = sizeof( audioRange );
+ err = AudioDeviceGetProperty( devID, 0, isInput,
+ kAudioDevicePropertyBufferFrameSizeRange, &dataSize, &audioRange );
+ if( err != noErr )
+ {
+ PRINT_ERR("Error reading buffer size range", err);
+ return;
+ }
+ PRINT(("kAudioDevicePropertyBufferFrameSizeRange = %g to %g frames\n", audioRange.mMinimum, audioRange.mMaximum ));
+
+ return;
+}
+#endif
+
/*******************************************************************/
-PaError PaHost_OpenInputStream( internalPortAudioStream *past )
+static PaError PaOSX_OpenInputDevice( internalPortAudioStream *past )
{
PaHostSoundControl *pahsc;
const PaHostDeviceInfo *hostDeviceInfo;
PaError result = paNoError;
- UInt32 bytesPerHostBuffer;
UInt32 dataSize;
OSStatus err = noErr;
- int bytesPerInputFrame;
+ int needConverter = 0;
+ double deviceRate = past->past_SampleRate;
+
+ DBUG(("PaOSX_OpenInputDevice: -------------\n"));
pahsc = (PaHostSoundControl *) past->past_DeviceData;
- DBUG(("PaHost_OpenStream: deviceID = 0x%x\n", past->past_InputDeviceID));
if( (past->past_InputDeviceID < LOWEST_INPUT_DEVID) ||
(past->past_InputDeviceID > HIGHEST_INPUT_DEVID) )
{
@@ -796,68 +1029,134 @@ PaError PaHost_OpenInputStream( internalPortAudioStream *past )
}
hostDeviceInfo = &sDeviceInfos[past->past_InputDeviceID];
+ PaOSX_FixVolumeScalars( pahsc->input.audioDeviceID, IS_INPUT,
+ hostDeviceInfo->paInfo.maxInputChannels, 0.1, 0.9 );
+
/* Try to set sample rate. */
- result = PaHost_SetSampleRate( hostDeviceInfo->audioDeviceID, IS_INPUT, past->past_SampleRate );
- if( result != paNoError ) return result;
+ result = PaOSX_SetSampleRate( pahsc->input.audioDeviceID, IS_INPUT, past->past_SampleRate );
+ if( result != paNoError )
+ {
+ DBUG(("PaOSX_OpenInputDevice: Need converter for sample rate = %f\n", past->past_SampleRate ));
+ needConverter = 1;
+ result = paNoError;
+ }
+ else
+ {
+ DBUG(("PaOSX_OpenInputDevice: successfully set sample rate to %f\n", past->past_SampleRate ));
+ }
- if( past->past_NumInputChannels != hostDeviceInfo->paInfo.maxInputChannels )
+ /* Try to set number of channels. */
+ if( past->past_NumInputChannels > hostDeviceInfo->paInfo.maxInputChannels )
{
-#if 1
- return paInvalidChannelCount; // FIXME - how support mono?
-#else
-FIXME - should this be set on a stream basis? Is it possible to change?
- /* Attempt to set number of channels. */
+ return paInvalidChannelCount; /* Too many channels! */
+ }
+ else if( past->past_NumInputChannels < hostDeviceInfo->paInfo.maxInputChannels )
+ {
+
AudioStreamBasicDescription formatDesc;
OSStatus err;
memset( &formatDesc, 0, sizeof(AudioStreamBasicDescription) );
formatDesc.mChannelsPerFrame = past->past_NumInputChannels;
-
- err = AudioDeviceSetProperty( hostDeviceInfo->audioDeviceID, 0, 0,
+ err = AudioDeviceSetProperty( pahsc->input.audioDeviceID, 0, 0,
IS_INPUT, kAudioDevicePropertyStreamFormat, sizeof(formatDesc), &formatDesc);
- if (err != kAudioHardwareNoError)
+ if (err != noErr)
{
- result = paInvalidChannelCount;
- goto error;
+ needConverter = 1;
}
-#endif
}
- // calculate native buffer sizes in bytes
- bytesPerInputFrame = Pa_GetSampleSize(paFloat32) * past->past_NumInputChannels;
- pahsc->pahsc_BytesPerUserNativeInputBuffer = past->past_FramesPerUserBuffer * bytesPerInputFrame;
- bytesPerHostBuffer = pahsc->pahsc_FramesPerHostBuffer * bytesPerInputFrame;
-
- // Change the bufferSize of the device! Is this per device or just for our stream?
- dataSize = sizeof(UInt32);
- err = AudioDeviceSetProperty( hostDeviceInfo->audioDeviceID, 0, 0, IS_INPUT,
- kAudioDevicePropertyBufferSize, dataSize, &bytesPerHostBuffer);
+ /* Try to set the I/O bufferSize of the device. */
+ dataSize = sizeof(pahsc->framesPerHostBuffer);
+ err = AudioDeviceSetProperty( pahsc->input.audioDeviceID, 0, 0, IS_INPUT,
+ kAudioDevicePropertyBufferFrameSize, dataSize,
+ &pahsc->framesPerHostBuffer);
if( err != noErr )
{
- ERR_RPT(("Could not force buffer size!"));
- result = paHostError;
- goto error;
+ DBUG(("PaOSX_OpenInputDevice: Need converter for buffer size = %d\n", pahsc->framesPerHostBuffer));
+ needConverter = 1;
}
-
- // setup conversion procedure
+
+ // setup PA conversion procedure
result = PaConvert_SetupInput( past, paFloat32 );
+
+ if( needConverter )
+ {
+ AudioStreamBasicDescription sourceStreamFormat, destStreamFormat;
+
+ /* Get source device format */
+ dataSize = sizeof(sourceStreamFormat);
+ err = AudioDeviceGetProperty(pahsc->input.audioDeviceID, 0, IS_INPUT,
+ kAudioDevicePropertyStreamFormat, &dataSize, &sourceStreamFormat);
+ if( err != noErr )
+ {
+ PRINT_ERR("PaOSX_OpenInputDevice: Could not get input device format", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
+ deviceRate = sourceStreamFormat.mSampleRate;
+ DBUG(("PaOSX_OpenInputDevice: current device sample rate = %f\n", deviceRate ));
+
+ /* Set target user format. */
+ destStreamFormat = sourceStreamFormat;
+ destStreamFormat.mSampleRate = past->past_SampleRate; // sample rate of the user synthesis code
+ destStreamFormat.mChannelsPerFrame = past->past_NumInputChannels; // the number of channels in each frame
+
+ err = AudioConverterNew (
+ &sourceStreamFormat,
+ &destStreamFormat,
+ &pahsc->input.converter);
+ if( err != noErr )
+ {
+ PRINT_ERR("Could not create input format converter", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
+ }
+
+ /* Allocate FIFO between Device callback and Converter callback so that device can push data
+ * and converter can pull data.
+ */
+ if( needConverter || pahsc->usingSecondDevice )
+ {
+ double sampleRateRatio;
+ long minSize, numBytes;
+
+ /* Allocate an input buffer because we need it between the user callback and the converter. */
+ pahsc->input.converterBuffer = PaHost_AllocateFastMemory( pahsc->input.bytesPerUserNativeBuffer );
+ if( pahsc->input.converterBuffer == NULL )
+ {
+ return paInsufficientMemory;
+ }
- return result;
-
-error:
+ sampleRateRatio = deviceRate / past->past_SampleRate;
+ minSize = pahsc->input.bytesPerUserNativeBuffer * 4 * sampleRateRatio;
+ numBytes = RoundUpToNextPowerOf2( minSize );
+ DBUG(("PaOSX_OpenInputDevice: FIFO numBytes = %ld\n", numBytes));
+ pahsc->ringBufferData = PaHost_AllocateFastMemory( numBytes );
+ if( pahsc->ringBufferData == NULL )
+ {
+ return paInsufficientMemory;
+ }
+ RingBuffer_Init( &pahsc->ringBuffer, numBytes, pahsc->ringBufferData );
+ // make it look full at beginning
+ RingBuffer_AdvanceWriteIndex( &pahsc->ringBuffer, numBytes );
+ }
+
return result;
}
/*******************************************************************/
-PaError PaHost_OpenOutputStream( internalPortAudioStream *past )
+static PaError PaOSX_OpenOutputDevice( internalPortAudioStream *past )
{
PaHostSoundControl *pahsc;
const PaHostDeviceInfo *hostDeviceInfo;
PaError result = paNoError;
- UInt32 bytesPerHostBuffer;
UInt32 dataSize;
OSStatus err = noErr;
- int bytesPerOutputFrame;
+ int needConverter = 0;
+ DBUG(("PaOSX_OpenOutputDevice: -------------\n"));
+
pahsc = (PaHostSoundControl *) past->past_DeviceData;
DBUG(("PaHost_OpenStream: deviceID = 0x%x\n", past->past_OutputDeviceID));
@@ -866,101 +1165,141 @@ PaError PaHost_OpenOutputStream( internalPortAudioStream *past )
{
return paInvalidDeviceId;
}
+
hostDeviceInfo = &sDeviceInfos[past->past_OutputDeviceID];
+
+ //PaOSX_DumpDeviceInfo( pahsc->output.audioDeviceID, IS_OUTPUT );
+ PaOSX_FixVolumeScalars( pahsc->output.audioDeviceID, IS_OUTPUT,
+ hostDeviceInfo->paInfo.maxOutputChannels, 0.1, 0.9 );
+
/* Try to set sample rate. */
- result = PaHost_SetSampleRate( hostDeviceInfo->audioDeviceID, IS_OUTPUT, past->past_SampleRate );
- if( result != paNoError ) return result;
+ result = PaOSX_SetSampleRate( pahsc->output.audioDeviceID, IS_OUTPUT, past->past_SampleRate );
+ if( result != paNoError )
+ {
+ DBUG(("PaOSX_OpenOutputDevice: Need converter for sample rate = %f\n", past->past_SampleRate ));
+ needConverter = 1;
+ result = paNoError;
+ }
+ else
+ {
+ DBUG(("PaOSX_OpenOutputDevice: successfully set sample rate to %f\n", past->past_SampleRate ));
+ }
- if( past->past_NumOutputChannels != hostDeviceInfo->paInfo.maxOutputChannels )
+ if( past->past_NumOutputChannels > hostDeviceInfo->paInfo.maxOutputChannels )
+ {
+ return paInvalidChannelCount; /* Too many channels! */
+ }
+ else
{
-#if 1
- return paInvalidChannelCount; // FIXME - how support mono?
-#else
/* Attempt to set number of channels. */
AudioStreamBasicDescription formatDesc;
OSStatus err;
memset( &formatDesc, 0, sizeof(AudioStreamBasicDescription) );
formatDesc.mChannelsPerFrame = past->past_NumOutputChannels;
- err = AudioDeviceSetProperty( hostDeviceInfo->audioDeviceID, 0, 0,
+ err = AudioDeviceSetProperty( pahsc->output.audioDeviceID, 0, 0,
IS_OUTPUT, kAudioDevicePropertyStreamFormat, sizeof(formatDesc), &formatDesc);
-
if (err != kAudioHardwareNoError)
{
- result = paInvalidChannelCount;
- goto error;
+ DBUG(("PaOSX_OpenOutputDevice: Need converter for num channels.\n"));
+ needConverter = 1;
}
-#endif
}
- // calculate buffer sizes in bytes
- bytesPerOutputFrame = Pa_GetSampleSize(paFloat32) * past->past_NumOutputChannels;
- pahsc->pahsc_BytesPerUserNativeOutputBuffer = past->past_FramesPerUserBuffer * bytesPerOutputFrame;
- bytesPerHostBuffer = pahsc->pahsc_FramesPerHostBuffer * bytesPerOutputFrame;
-
- // Change the bufferSize of the device! Is this per device or just for our stream?
- dataSize = sizeof(bytesPerHostBuffer);
- err = AudioDeviceSetProperty( hostDeviceInfo->audioDeviceID, 0, 0, IS_OUTPUT,
- kAudioDevicePropertyBufferSize, dataSize, &bytesPerHostBuffer);
+ /* Change the I/O bufferSize of the device. */
+ dataSize = sizeof(pahsc->framesPerHostBuffer);
+ err = AudioDeviceSetProperty( pahsc->output.audioDeviceID, 0, 0, IS_OUTPUT,
+ kAudioDevicePropertyBufferFrameSize, dataSize,
+ &pahsc->framesPerHostBuffer);
if( err != noErr )
{
- ERR_RPT(("Could not force buffer size!"));
- result = paHostError;
- goto error;
+ DBUG(("PaOSX_OpenOutputDevice: Need converter for buffer size = %d\n", pahsc->framesPerHostBuffer));
+ needConverter = 1;
}
-
+
// setup conversion procedure
result = PaConvert_SetupOutput( past, paFloat32 );
- return result;
+ if( needConverter )
+ {
+ AudioStreamBasicDescription sourceStreamFormat, destStreamFormat;
+ DBUG(("PaOSX_OpenOutputDevice: using AUConverter!\n"));
+ /* Get target device format */
+ dataSize = sizeof(destStreamFormat);
+ err = AudioDeviceGetProperty(pahsc->output.audioDeviceID, 0, IS_OUTPUT,
+ kAudioDevicePropertyStreamFormat, &dataSize, &destStreamFormat);
+ if( err != noErr )
+ {
+ PRINT_ERR("PaOSX_OpenOutputDevice: Could not get output device format", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
-error:
+ /* Set source user format. */
+ sourceStreamFormat = destStreamFormat;
+ sourceStreamFormat.mSampleRate = past->past_SampleRate; // sample rate of the user synthesis code
+ sourceStreamFormat.mChannelsPerFrame = past->past_NumOutputChannels; // the number of channels in each frame
+
+ /* Allocate an output buffer because we need it between the user callback and the converter. */
+ pahsc->output.converterBuffer = PaHost_AllocateFastMemory( pahsc->output.bytesPerUserNativeBuffer );
+ err = AudioConverterNew (
+ &sourceStreamFormat,
+ &destStreamFormat,
+ &pahsc->output.converter);
+ if( err != noErr )
+ {
+ PRINT_ERR("Could not create output format converter", err);
+ sSavedHostError = err;
+ return paHostError;
+ }
+ }
+
return result;
}
-/*******************************************************************/
-PaError PaHost_GetTotalBufferFrames( internalPortAudioStream *past )
-{
- PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
- return pahsc->pahsc_FramesPerHostBuffer;
-}
-
-
/*******************************************************************
* Determine how many User Buffers we can put into our CoreAudio stream buffer.
* Uses:
* past->past_FramesPerUserBuffer, etc.
* Sets:
* past->past_NumUserBuffers
-* pahsc->pahsc_UserBuffersPerHostBuffer
-* pahsc->pahsc_FramesPerHostBuffer
+* pahsc->framesPerHostBuffer
+* pahsc->input.bytesPerUserNativeBuffer
+* pahsc->output.bytesPerUserNativeBuffer
*/
-static void PaHost_CalcHostBufferSize( internalPortAudioStream *past )
+static void PaOSX_CalcHostBufferSize( internalPortAudioStream *past )
{
PaHostSoundControl *pahsc = ( PaHostSoundControl *)past->past_DeviceData;
- unsigned int minNumUserBuffers;
- // Determine number of user buffers based on minimum latency.
- minNumUserBuffers = Pa_GetMinNumBuffers( past->past_FramesPerUserBuffer, past->past_SampleRate );
- // Compare to user requested number in user wants more than the minimum.
- past->past_NumUserBuffers = ( minNumUserBuffers > past->past_NumUserBuffers ) ?
- minNumUserBuffers : past->past_NumUserBuffers;
- DBUG(("PaHost_CalcNumHostBuffers: min past_NumUserBuffers = %d\n", past->past_NumUserBuffers ));
+ // Determine number of user buffers based strictly on minimum reasonable buffer size.
+ // We ignore the Pa_OpenStream numBuffer parameter because CoreAudio has a big
+ // mix buffer and handles latency automatically.
+ past->past_NumUserBuffers = Pa_GetMinNumBuffers( past->past_FramesPerUserBuffer, past->past_SampleRate );
- // For CoreAudio, we only have one Host buffer, so...
- pahsc->pahsc_UserBuffersPerHostBuffer = past->past_NumUserBuffers;
// Calculate size of CoreAudio buffer.
- pahsc->pahsc_FramesPerHostBuffer = past->past_FramesPerUserBuffer * past->past_NumUserBuffers;
+ pahsc->framesPerHostBuffer = past->past_FramesPerUserBuffer * past->past_NumUserBuffers;
- DBUG(("PaHost_CalcNumHostBuffers: pahsc_UserBuffersPerHostBuffer = %d\n", pahsc->pahsc_UserBuffersPerHostBuffer ));
- DBUG(("PaHost_CalcNumHostBuffers: pahsc_FramesPerHostBuffer = %d\n", pahsc->pahsc_FramesPerHostBuffer ));
+ // calculate buffer sizes in bytes
+ pahsc->input.bytesPerUserNativeBuffer = past->past_FramesPerUserBuffer *
+ Pa_GetSampleSize(paFloat32) * past->past_NumInputChannels;
+ pahsc->output.bytesPerUserNativeBuffer = past->past_FramesPerUserBuffer *
+ Pa_GetSampleSize(paFloat32) * past->past_NumOutputChannels;
+
+ DBUG(("PaOSX_CalcNumHostBuffers: past_NumUserBuffers = %ld\n", past->past_NumUserBuffers ));
+ DBUG(("PaOSX_CalcNumHostBuffers: framesPerHostBuffer = %d\n", pahsc->framesPerHostBuffer ));
+ DBUG(("PaOSX_CalcNumHostBuffers: input.bytesPerUserNativeBuffer = %d\n", pahsc->input.bytesPerUserNativeBuffer ));
+ DBUG(("PaOSX_CalcNumHostBuffers: output.bytesPerUserNativeBuffer = %d\n", pahsc->output.bytesPerUserNativeBuffer ));
}
-/*******************************************************************/
+/*****************************************************************************/
+/************** Internal Host API ********************************************/
+/*****************************************************************************/
PaError PaHost_OpenStream( internalPortAudioStream *past )
{
PaError result = paNoError;
PaHostSoundControl *pahsc;
+ Boolean useInput;
+ Boolean useOutput;
/* Allocate and initialize host data. */
pahsc = (PaHostSoundControl *) malloc(sizeof(PaHostSoundControl));
@@ -971,43 +1310,53 @@ PaError PaHost_OpenStream( internalPortAudioStream *past )
}
memset( pahsc, 0, sizeof(PaHostSoundControl) );
past->past_DeviceData = (void *) pahsc;
+ pahsc->primaryDeviceID = kAudioDeviceUnknown;
+ pahsc->input.audioDeviceID = kAudioDeviceUnknown;
+ pahsc->output.audioDeviceID = kAudioDeviceUnknown;
+
+ PaOSX_CalcHostBufferSize( past );
+
+ /* Setup constants for CPU load measurement. */
+ pahsc->inverseMicrosPerHostBuffer = past->past_SampleRate / (1000000.0 * pahsc->framesPerHostBuffer);
- // If we are using both input and out, then they must be on the same CoreAudio device,
- // until we implement a FIFO between two devices.
- if( (past->past_OutputDeviceID != paNoDevice) && (past->past_InputDeviceID != paNoDevice) )
+ useOutput = (past->past_OutputDeviceID != paNoDevice) && (past->past_NumOutputChannels > 0);
+ useInput = (past->past_InputDeviceID != paNoDevice) && (past->past_NumInputChannels > 0);
+
+ // Set device IDs
+ if( useOutput )
{
- AudioDeviceID inputID = sDeviceInfos[past->past_InputDeviceID].audioDeviceID;
- AudioDeviceID outputID = sDeviceInfos[past->past_OutputDeviceID].audioDeviceID;
- if( inputID != outputID )
+ pahsc->output.audioDeviceID = sDeviceInfos[past->past_OutputDeviceID].audioDeviceID;
+ pahsc->primaryDeviceID = pahsc->output.audioDeviceID;
+ if( useInput )
{
- ERR_RPT(("PortAudio: input and output must use same CoreAudio device!\n"));
- return paInvalidDeviceId;
+ pahsc->input.audioDeviceID = sDeviceInfos[past->past_InputDeviceID].audioDeviceID;
+ if( pahsc->input.audioDeviceID != pahsc->primaryDeviceID )
+ {
+ pahsc->usingSecondDevice = TRUE; // Use two separate devices!
+ }
}
}
-
- PaHost_CalcHostBufferSize( past );
-
+ else
{
- int msecLatency = (int) ((PaHost_GetTotalBufferFrames(past) * 1000) / past->past_SampleRate);
- PRINT(("PortAudio on OS X - Latency = %d frames, %d msec\n", PaHost_GetTotalBufferFrames(past), msecLatency ));
+ /* Just input, not output. */
+ pahsc->input.audioDeviceID = sDeviceInfos[past->past_InputDeviceID].audioDeviceID;
+ pahsc->primaryDeviceID = pahsc->input.audioDeviceID;
}
+ DBUG(("outputDeviceID = %ld\n", pahsc->output.audioDeviceID ));
+ DBUG(("inputDeviceID = %ld\n", pahsc->input.audioDeviceID ));
+ DBUG(("primaryDeviceID = %ld\n", pahsc->primaryDeviceID ));
- /* Setup constants for CPU load measurement. */
- pahsc->pahsc_InverseMicrosPerHostBuffer = past->past_SampleRate / (1000000.0 * pahsc->pahsc_FramesPerHostBuffer);
-
/* ------------------ OUTPUT */
- if( (past->past_OutputDeviceID != paNoDevice) && (past->past_NumOutputChannels > 0) )
+ if( useOutput )
{
- pahsc->pahsc_AudioDeviceID = sDeviceInfos[past->past_OutputDeviceID].audioDeviceID;
- result = PaHost_OpenOutputStream( past );
+ result = PaOSX_OpenOutputDevice( past );
if( result < 0 ) goto error;
}
/* ------------------ INPUT */
- if( (past->past_InputDeviceID != paNoDevice) && (past->past_NumInputChannels > 0) )
+ if( useInput )
{
- pahsc->pahsc_AudioDeviceID = sDeviceInfos[past->past_InputDeviceID].audioDeviceID;
- result = PaHost_OpenInputStream( past );
+ result = PaOSX_OpenInputDevice( past );
if( result < 0 ) goto error;
}
@@ -1041,21 +1390,49 @@ PaError PaHost_StartEngine( internalPortAudioStream *past )
past->past_StopNow = 0;
past->past_IsActive = 1;
+/* If full duplex and using two separate devices then start input device. */
+ if( pahsc->usingSecondDevice )
+ {
+ // Associate an IO proc with the device and pass a pointer to the audio data context
+ err = AudioDeviceAddIOProc(pahsc->input.audioDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioInputCallback, past);
+ if (err != noErr)
+ {
+ PRINT_ERR("PaHost_StartEngine: AudioDeviceAddIOProc secondary failed", err );
+ goto error;
+ }
+
+ // start playing sound through the device
+ err = AudioDeviceStart(pahsc->input.audioDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioInputCallback);
+ if (err != noErr)
+ {
+ PRINT_ERR("PaHost_StartEngine: AudioDeviceStart secondary failed", err );
+ PRINT(("The program may succeed if you run it again!\n"));
+ goto error;
+ }
+ }
+
// Associate an IO proc with the device and pass a pointer to the audio data context
- err = AudioDeviceAddIOProc(pahsc->pahsc_AudioDeviceID, (AudioDeviceIOProc)appIOProc, past);
- if (err != noErr) goto error;
+ err = AudioDeviceAddIOProc(pahsc->primaryDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioIOCallback, past);
+ if (err != noErr)
+ {
+ PRINT_ERR("PaHost_StartEngine: AudioDeviceAddIOProc primary failed", err );
+ goto error;
+ }
// start playing sound through the device
- err = AudioDeviceStart(pahsc->pahsc_AudioDeviceID, (AudioDeviceIOProc)appIOProc);
- if (err != noErr) goto error;
+ err = AudioDeviceStart(pahsc->primaryDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioIOCallback);
+ if (err != noErr)
+ {
+ PRINT_ERR("PaHost_StartEngine: AudioDeviceStart primary failed", err );
+ PRINT(("The program may succeed if you run it again!\n"));
+ goto error;
+ }
+
return result;
-#if PA_TRACE_START_STOP
- AddTraceMessage( "PaHost_StartEngine: TimeSlice() returned ", result );
-#endif
-
error:
- return paHostError; // FIXME - save host error
+ sSavedHostError = err;
+ return paHostError;
}
/*************************************************************************/
@@ -1077,16 +1454,29 @@ PaError PaHost_StopEngine( internalPortAudioStream *past, int abort )
#endif
// FIXME - we should ask proc to stop instead of stopping abruptly
- err = AudioDeviceStop(pahsc->pahsc_AudioDeviceID, (AudioDeviceIOProc)appIOProc);
- if (err != noErr) goto Bail;
+ err = AudioDeviceStop(pahsc->primaryDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioIOCallback);
+ if (err != noErr)
+ {
+ goto error;
+ }
- err = AudioDeviceRemoveIOProc(pahsc->pahsc_AudioDeviceID, (AudioDeviceIOProc)appIOProc);
- if (err != noErr) goto Bail;
+ err = AudioDeviceRemoveIOProc(pahsc->primaryDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioIOCallback);
+ if (err != noErr) goto error;
+
+/* If full duplex and using two separate devices then start input device. */
+ if( pahsc->usingSecondDevice )
+ {
+ err = AudioDeviceStop(pahsc->input.audioDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioInputCallback);
+ if (err != noErr) goto error;
+ err = AudioDeviceRemoveIOProc(pahsc->input.audioDeviceID, (AudioDeviceIOProc)PaOSX_CoreAudioInputCallback);
+ if (err != noErr) goto error;
+ }
return paNoError;
-Bail:
- return paHostError; // FIXME - save err
+error:
+ sSavedHostError = err;
+ return paHostError;
}
/*************************************************************************/
@@ -1109,70 +1499,47 @@ PaError PaHost_CloseStream( internalPortAudioStream *past )
if( past == NULL ) return paBadStreamPtr;
pahsc = (PaHostSoundControl *) past->past_DeviceData;
if( pahsc == NULL ) return paNoError;
+
+ //PaOSX_DumpDeviceInfo( sDeviceInfos[past->past_OutputDeviceID].audioDeviceID, IS_OUTPUT );
#if PA_TRACE_START_STOP
AddTraceMessage( "PaHost_CloseStream: pahsc_HWaveOut ", (int) pahsc->pahsc_HWaveOut );
#endif
+ if( pahsc->output.converterBuffer != NULL )
+ {
+ PaHost_FreeFastMemory( pahsc->output.converterBuffer, pahsc->output.bytesPerUserNativeBuffer );
+ }
+ if( pahsc->input.converterBuffer != NULL )
+ {
+ PaHost_FreeFastMemory( pahsc->input.converterBuffer, pahsc->input.bytesPerUserNativeBuffer );
+ }
+ if( pahsc->ringBufferData != NULL )
+ {
+ PaHost_FreeFastMemory( pahsc->ringBufferData, pahsc->ringBuffer.bufferSize );
+ }
+ if( pahsc->output.converter != NULL )
+ {
+ verify_noerr(AudioConverterDispose (pahsc->output.converter));
+ }
+ if( pahsc->input.converter != NULL )
+ {
+ verify_noerr(AudioConverterDispose (pahsc->input.converter));
+ }
+
free( pahsc );
past->past_DeviceData = NULL;
return paNoError;
}
-/*************************************************************************
-** Determine minimum number of buffers required for this host based
-** on minimum latency. Latency can be optionally set by user by setting
-** an environment variable. For example, to set latency to 200 msec, put:
-**
-** set PA_MIN_LATENCY_MSEC=200
-**
-** in the cshrc file.
-*/
-#define PA_LATENCY_ENV_NAME ("PA_MIN_LATENCY_MSEC")
-
-#if 1
-int Pa_GetMinNumBuffers( int framesPerBuffer, double framesPerSecond )
-{
- int minBuffers;
- int denominator;
- int minLatencyMsec = PA_MIN_LATENCY_MSEC;
- char *minLatencyText = getenv(PA_LATENCY_ENV_NAME);
- if( minLatencyText != NULL )
- {
- PRINT(("PA_MIN_LATENCY_MSEC = %s\n", minLatencyText ));
- minLatencyMsec = atoi( minLatencyText );
- if( minLatencyMsec < 1 ) minLatencyMsec = 1;
- else if( minLatencyMsec > 5000 ) minLatencyMsec = 5000;
- }
-
- denominator = 1000.0 * framesPerBuffer;
- minBuffers = (int) (((minLatencyMsec * framesPerSecond) + denominator - 1) / denominator );
- if( minBuffers < 1 ) minBuffers = 1;
- return minBuffers;
-}
-#else
-/*************************************************************************
-** Determine minimum number of buffers required for this host based
-** on minimum latency.
+/**********************************************************************
+** Initialize Host dependant part of API.
*/
-int Pa_GetMinNumBuffers( int framesPerUserBuffer, double sampleRate )
+PaError PaHost_Init( void )
{
- int minUserBuffers;
- int minFramesPerHostBuffer;
-
- // Calculate minimum and maximum sizes based on timing and sample rate.
- minFramesPerHostBuffer = (int) (PA_MIN_LATENCY_MSEC * sampleRate / 1000.0);
- // round up to nearest multiple of 8
- minFramesPerHostBuffer = (minFramesPerHostBuffer + 7) & ~7;
- DBUG(("Pa_GetMinNumBuffers: minFramesPerHostBuffer = %d\n", minFramesPerHostBuffer ));
-
- minUserBuffers = (minFramesPerHostBuffer + framesPerUserBuffer - 1) / framesPerUserBuffer;
- if( minUserBuffers < 1 ) minUserBuffers = 1;
-
- return minUserBuffers;
+ return PaOSX_MaybeQueryDevices();
}
-#endif
/*************************************************************************
** Cleanup device info.
@@ -1185,8 +1552,10 @@ PaError PaHost_Term( void )
{
for( i=0; i<sNumPaDevices; i++ )
{
- if( sDeviceInfos[i].paInfo.name != NULL ) free( (char*)sDeviceInfos[i].paInfo.name );
- if( sDeviceInfos[i].paInfo.sampleRates != NULL ) free( (void*)sDeviceInfos[i].paInfo.sampleRates );
+ if( sDeviceInfos[i].paInfo.name != NULL )
+ {
+ free( (char*)sDeviceInfos[i].paInfo.name );
+ }
}
free( sDeviceInfos );
sDeviceInfos = NULL;
@@ -1196,19 +1565,6 @@ PaError PaHost_Term( void )
return paNoError;
}
-/*************************************************************************/
-void Pa_Sleep( long msec )
-{
-#if 0
- struct timeval timeout;
- timeout.tv_sec = msec / 1000;
- timeout.tv_usec = (msec % 1000) * 1000;
- select( 0, NULL, NULL, NULL, &timeout );
-#else
- usleep( msec * 1000 );
-#endif
-}
-
/*************************************************************************
* Allocate memory that can be accessed in real-time.
* This may need to be held in physical memory so that it is not
@@ -1217,7 +1573,7 @@ void Pa_Sleep( long msec )
*/
void *PaHost_AllocateFastMemory( long numBytes )
{
- void *addr = malloc( numBytes ); /* FIXME - do we need physical memory? */
+ void *addr = malloc( numBytes ); /* FIXME - do we need physical memory, not virtual memory? */
if( addr != NULL ) memset( addr, 0, numBytes );
return addr;
}
@@ -1242,6 +1598,57 @@ PaError PaHost_StreamActive( internalPortAudioStream *past )
return (PaError) past->past_IsActive;
}
+/*******************************************************************/
+PaError PaHost_GetTotalBufferFrames( internalPortAudioStream *past )
+{
+ PaHostSoundControl *pahsc = (PaHostSoundControl *) past->past_DeviceData;
+ return pahsc->framesPerHostBuffer;
+}
+
+/*****************************************************************************/
+/************** External User API ********************************************/
+/*****************************************************************************/
+
+/**********************************************************************
+** Query devices and use result.
+*/
+PaDeviceID Pa_GetDefaultInputDeviceID( void )
+{
+ PaError result = PaOSX_MaybeQueryDevices();
+ if( result < 0 ) return result;
+ return sDefaultInputDeviceID;
+}
+
+PaDeviceID Pa_GetDefaultOutputDeviceID( void )
+{
+ PaError result = PaOSX_MaybeQueryDevices();
+ if( result < 0 ) return result;
+ return sDefaultOutputDeviceID;
+}
+
+
+/*************************************************************************
+** Determine minimum number of buffers required for this host based
+** on minimum latency. Because CoreAudio manages latency, this just sets
+** a reasonable small buffer size.
+*/
+int Pa_GetMinNumBuffers( int framesPerBuffer, double framesPerSecond )
+{
+ int minBuffers;
+ double denominator;
+ int minLatencyMsec = PA_MIN_LATENCY_MSEC;
+ denominator = 1000.0 * framesPerBuffer;
+ minBuffers = (int) (((minLatencyMsec * framesPerSecond) + denominator - 1) / denominator );
+ if( minBuffers < 1 ) minBuffers = 1;
+ return minBuffers;
+}
+
+/*************************************************************************/
+void Pa_Sleep( long msec )
+{
+ usleep( msec * 1000 );
+}
+
/*************************************************************************/
PaTimestamp Pa_StreamTime( PortAudioStream *stream )
{
@@ -1252,10 +1659,37 @@ PaTimestamp Pa_StreamTime( PortAudioStream *stream )
if( past == NULL ) return paBadStreamPtr;
pahsc = (PaHostSoundControl *) past->past_DeviceData;
- AudioDeviceGetCurrentTime(pahsc->pahsc_AudioDeviceID, &timeStamp);
+ AudioDeviceGetCurrentTime(pahsc->primaryDeviceID, &timeStamp);
streamTime = ( timeStamp.mFlags & kAudioTimeStampSampleTimeValid) ?
timeStamp.mSampleTime : past->past_FrameCount;
return streamTime;
}
+
+/************************************************************************************/
+long Pa_GetHostError()
+{
+ return sSavedHostError;
+}
+
+/*************************************************************************/
+int Pa_CountDevices()
+{
+ if( sNumPaDevices <= 0 ) Pa_Initialize();
+ return sNumPaDevices;
+}
+
+/*************************************************************************
+** PaDeviceInfo structures have already been created
+** so just return the pointer.
+**
+*/
+const PaDeviceInfo* Pa_GetDeviceInfo( PaDeviceID id )
+{
+ if( id < 0 || id >= sNumPaDevices )
+ return NULL;
+
+ return &sDeviceInfos[id].paInfo;
+}
+